Handleiding Oceanic OC1 (pagina 13 van 68) (Engels)

551838

Verklein

Vergroot

Pagina terug

1/68

Pagina verder

OC1 OPERATING MANUAL

Set CDT, information includes (Fig. 13):

> Graphics SEt and CD TMR

> CDT (hr:min) with Hour digits ﬂashing

> Time (clock) icon

• A (hold) to scroll upward through Hour Set Points at a rate of 8 per second from 0: to 23: in increments of 1: (hr).

• A (< 2 sec) to step upward through Set Points one at a time.

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the Hour Set Point and ﬂash the Minute digits.

• A (hold) to scroll upward through Minute Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (min).

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the CDT Set Point and revert to the CDT Status screen with SET ﬂashing (similar to Fig. 12).

The CDT will run in the background, while in Watch mode, until it counts down to 0:00, or it is set OFF, or DC Mode is accessed

or a Dive is started in which case the CD will terminate and revert to OFF.

When a set Countdown Time reaches 0:00, the Audible Alarm will sound during which time the graphic CDT will be displayed

on the watch Default Time screen with 0:00 ﬂashing (Fig. 14).

FREE Dive Mode has a separate (min:sec) CDT.

CHRONOGRAPH (Stop Watch/Lap Timer)

Upon access from the Menu, the Status screen is displayed

> OFF solid and 0:00, if no time was previously set

> ON and the remaining Countdown Time (hr:min), if running

> OFF ﬂashing and the time previously set, if it has ended

Chrono Status, information includes (Fig. 15):

> Graphic CHRONO

> Elapsed time if running, or 0:00:00.00 (hr:min:sec .01 sec)

> Time (clock) icon

• S (< 2 sec) to start Timer counting up from 0:00:00.00 to 9:59:59.99 max (hr:min:sec .01 sec) in increments of .01

(1/100th sec). After ﬁrst 4.99 seconds, the .01 digits display 2 dashes (. - - ).

• S (< 2 sec) to freeze and display Laps (up to 9), the Timer continues to run in the background

• A (< 2 sec) to stop Timer and recall Lap 1 (Fig. 16), repeat to recall other Laps

• A (2 sec) to reset Timer to 0:00:00.00 and revert to the Chrono Status screen

While the Chronograph is running, it remains on the screen until another screen is accessed, it will then continue to run in the

background while on the surface. Upon descending on a dive, Chrono operation will be terminated and reset to 0:00:00.00.

DAILY ALARM

When set On, the Daily Alarm will -

> be synchronized with the Watch Default Time selected.

> sound the Audible at the Time set every day.

> not sound the Audible while operating in DC Modes.

> run in the background until set Off.

Daily Alarm Status

Upon access, the following is displayed (Fig. 17) -

> Graphics DAILY AL solid with OFF (or ON) ﬂashing.

> Alarm Time (hr:min) set with graphic A (or P) if 12 Hour Format, and Time (clock) and Alarm (speaker) icons.

• A < 2 sec to step through selections OFF, ON, and SET.

• S < 2 sec to save the selection that is ﬂashing.

>> If OFF is selected, operation reverts to the Menu.

>> If ON is selected, operation reverts to the Menu with the Alarm enabled.

>> If SET is selected (Fig. 18), Set Daily Alarm is accessed.

Set Daily Alarm, information includes (Fig. 19):

> Graphics SEt and DAILY AL

> Alarm Time (hr:min) with Hour digits ﬂashing

> Time (clock) and Alarm (speaker) icons

• A (hold) to scroll upward through Hour Set Points at a rate of 8 per second from 0: to 23: in increments of 1: (hr).

• A (< 2 sec) to step upward through Set Points one at a time.

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the Hour Set Point and ﬂash the Minute digits.

• A (hold) to scroll upward through Minute Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (min).

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the Set Point and revert to the Daily Alarm Status screen with SET ﬂashing (similar to Fig. 18).

Fig. 13 - SET CDT

Fig. 14 - WATCH MAIN

(during CDT Alarm)

Fig. 15 - CHRONO

(started, running)

Fig. 16 - CHRONO

(started, frozen or recalled)

Fig. 17 - DAILY ALARM

STATUS (upon access)

Fig. 19 - SET ALARM TIME

Fig. 18 - DAILY AL STATUS

(to access Set or set/ready)

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Oceanic OC1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Oceanic OC1

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info