47241

Oce User Manual Data Administrator Handleiding

21
Verklein
Vergroot
Pagina terug
1/106
Pagina verder
4343-PS136-07 BK
User’s Guide
4343-PS136-07
Data Administrator Ver. 4
Data Administrator i
Contents
1 Getting Started
1.1 System Requirements ...................................................................... 1-1
1.2 Overview of Functions ...................................................................... 1-2
2 Software Installation
2.1 Data Administrator ........................................................................... 2-1
Installation ...................................................................................... 2-1
Uninstallation ................................................................................. 2-2
3 How to Use the Data Administrator
3.1 To Start .............................................................................................. 3-1
To Start .......................................................................................... 3-1
3.2 To Exit ................................................................................................ 3-1
To Exit ............................................................................................ 3-1
3.3 Device Registration .......................................................................... 3-2
3.4 Administrator settings ...................................................................... 3-3
Administrator settings .................................................................... 3-3
3.5 Single Device Settings ..................................................................... 3-7
Import Information from Device ..................................................... 3-7
When the SNMP Read Community Name Is Displayed .............. 3-10
Import Abbreviated Address Data from CSV Files ...................... 3-10
Import Abbreviated Address Data from an LDAP server ............. 3-15
Import Abbreviated Address Data from a Previous Device ......... 3-20
Set Search Range ........................................................................ 3-25
3.6 Bulk Copy of Settings ..................................................................... 3-26
Copy Settings from One Device to Another Device ..................... 3-26
3.7 Address collective maintenance ................................................... 3-30
Address collective maintenance .................................................. 3-30
3.8 Collective maintenance of user ..................................................... 3-36
Collective maintenance of user .................................................... 3-36
3.9 Account maintenance .................................................................... 3-42
Account maintenance .................................................................. 3-42
3.10 Change Date and Time ................................................................... 3-48
Change Device Date and Time .................................................... 3-48
Data Administrator ii
3.11 Automatic Creation of Boxes ........................................................ 3-51
Configure Automatic Box Creation .............................................. 3-51
3.12 Processing Options ........................................................................ 3-53
Set the Processing Options ......................................................... 3-53
3.13 Authentication Mode Template Settings ...................................... 3-54
Create Authentication Mode Templates ...................................... 3-54
Edit Authentication Mode Templates ........................................... 3-56
Delete Authentication Mode Templates ....................................... 3-58
3.14 User Template Settings .................................................................. 3-59
Create User Templates ................................................................ 3-59
Edit User Templates ..................................................................... 3-61
Delete User Templates ................................................................. 3-63
Set Default User Templates ......................................................... 3-64
3.15 Account Template Settings ........................................................... 3-65
Create Account Templates .......................................................... 3-65
Edit Account Templates ............................................................... 3-67
Delete Account Templates ........................................................... 3-69
Set Default Account Templates ................................................... 3-70
3.16 Weekly Timer Template Settings .................................................. 3-71
Create Weekly Timer Templates .................................................. 3-71
Edit Weekly Timer Templates ...................................................... 3-73
Delete Weekly Timer Templates .................................................. 3-75
3.17 IP Filtering Template Settings ....................................................... 3-76
Create IP Filtering Templates ....................................................... 3-76
Edit IP Filtering Templates ........................................................... 3-78
Delete IP Filtering Templates ....................................................... 3-80
3.18 Backup / Restoration of Address and Authentication ................ 3-81
Backup of Address and Authentication data ............................... 3-81
Restoration of Address data ........................................................ 3-85
Restoration of Authentication data .............................................. 3-88
4APPENDIX
4.1 Authentication Mode Template Setting Items ............................... 4-1
4.2 Weekly Timer Template Setting Items ............................................ 4-3
4.3 What Do I Do If this Message Is Displayed? .................................. 4-3
Data Administrator iii
About this Product
Data Administrator V4 is an administration tool as plug-in of Device Set-Up
with which authentication data and addresses that are registered in the con-
trol panel of supported devices (multifunctional OA equipment) can be edited
and changed from other computers on the network.
After importing and editing authentication lists and address lists from devic-
es, it can be used to then export these lists to devices.
Data Administrator V4 can import address lists in formats such as XML, CSV,
TAB, LDIF, and Lotus Notes Structured Text.
The LDAP protocol can be used to both search and browse destination data
on directory servers such as Active Directory, and to import these addresses.
Trademarks
Active Directory, Microsoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other coun-
tries.
Intel and Pentium are trademarks or registered trademarks of Intel Corpora-
tion or its subsidiaries in the United States and other countries.
All other product names are trademarks or registered trademarks of their re-
spective companies.
2
Note
Please be aware that devices and settings may result in the content of
screens being different to as shown in this document.
2
Note
Unauthorized reproduction, translation or duplication of this document,
whether in its entirety or in part, is strictly prohibited.
The content of this document is subject to change without notice.
Copyright © 2005 KONICA MINOLTA BUSINESS
TECHNOLOGIES, INC. All rights reserved.
Getting Started
1
Data Administrator 1-1
1 Getting Started
1.1 System Requirements
Systems must have the following specifications in order to use this software.
- Operating System
Windows 2000 Professional (SP4)
Windows XP Professional (SP2)
Windows XP Professional x64 Edition
Windows Vista Business
Windows Vista Enterprise
- Computer
PC/AT compatible, with 1GHz CPU or better
- Memory (RAM)
128 MB or above
- Unused hard drive capacity
600 MB or more
- Display
800 × 600 pixel, 16 bit - color or better
- Network
TCP/IP protocol
- Applications
Microsoft Internet Explorer 6.0 (SP1) or later
Microsoft .NET Framework 2.0
- Supported Devices
Please refer to the Readme file.
2
Note
In order to use this software, it is necessary to enable OpenAPI from the
device panel by clicking Administration Settings, then System.
Getting Started
1
Data Administrator 1-2
1.2 Overview of Functions
Below is a functional overview of Data Administrator.
- Acquisition and configuration of management data, network data, au-
thentication data, and address data registered on the device.
- Backup of management data, network data, authentication data, and ad-
dress data registered on the device.
- Copying of authentication data and address data to another device.
- Bulk settings of user data, group data, and abbreviated address data.
- Setting of access restrictions on a per-function basis.
- Import of data (XML, CSV, LDIF, formats) saved in files.
2
Note
If multiple device screens are open, then address and other data can be
copied and pasted to other devices.
For details of the following functions, refer to the user's guide of the Device
Set-Up.
- Search/Registration of the supported device
- Network initial settings
- Import/export of the device list
- Auto protect function
- Function access restriction file settings
- Group settings
- LDAP server access settings
- Display option settings
2
Note
When the Data Administrator is being employed for operation, make sure
that other administrators do not make any operation with the control pan-
el or the Web Connection.
Software Installation
2
Data Administrator 2-1
2 Software Installation
2.1 Data Administrator
Install and uninstall Data Administrator as follows:
Installation
0 When the Device Set-Up is not installed, the Device Set-Up installer is ac-
tivated. Be sure, first of all, to install the Device Set-Up.
1 Open the Data Administrator folder.
– Confirm the location to where you copied Data Administrator.
2 Double click Setup.exe. The installer starts.
3 Proceed with the install as indicated on the screen.
4 When the InstallShield Wizard Complete screen is displayed, click
Finish.
Click Start, then All Programs—MFP Utility—Data Admin V4, and
confirm that the Data Administrator V4 icon is there.
Software Installation
2
Data Administrator 2-2
Uninstallation
0 Please note that the use of the Data Administrator becomes unavailable
if the Device Set-Up is uninstalled with the Data Administrator installed.
On an occasion like this, reinstall it with the installer of the Data Adminis-
trator to install the Device Set-Up.
1 Click Start — Control Panel, to open the Control Panel.
– In case of Windows 2000, Click Start, then Settings—Control
Panel, to open the Control Panel.
2 Double-click Add or Remove Programs.
– In case of Windows 2000, double-click Add/Remove Programs.
3 In the Currently installed programs field, select Data Admin V4, and
click Change/Remove.
4 When the Confirm Uninstall screen is displayed, click OK.
Uninstall commences.
5 When the Maintenance Complete screen is displayed, click Finish.
How to Use the Data Administrator
3
Data Administrator 3-1
3 How to Use the Data Administrator
3.1 To Start
Start Data Administrator as follows.
To Start
% Click Start, then All Programs—MFP Utility—Data Admin V4—Data
Admin V4.
Main window appears.
2
Note
At the time the application is first started, the
Application protect set-
tings
screen is displayed. Refer to “Device Set-Up User’s Guide” about
Application protect settings.
Refer to “Device Set-Up User’s Guide” for more information about the
main window.
3.2 To Exit
Exit Data Administrator as follows.
To Exit
% From the File menu, select Exit.
How to Use the Data Administrator
3
Data Administrator 3-2
3.3 Device Registration
When using the Data Administrator, it is necessary to make a search for a
supported device on the network for registration.
As a method for the search/registration of a supported device, the following
are available.
- Method for searching a supported device on the network
- Method for searching a supported device with the IP address specified.
- Method for registering a supported device from the Function access re-
striction file
- Method for registering a supported device from the local file
!
Detail
For details of the method for search/registration of the supported device,
refer to the user's guide of the Device Set-up.
How to Use the Data Administrator
3
Data Administrator 3-3
3.4 Administrator settings
Make an administrator setting for the device registered with the Data Admin-
istrator.
Administrator settings
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Admin-
istrator settings] in Function Selection field.
How to Use the Data Administrator
3
Data Administrator 3-4
3 Set the method for reading the supported device and then click [Im-
port].
– Administrator settings:
Select this to read administrator settings from a device.
– Target of importing:
To connect devices and import the most recent data, select Obtain
from the device, and to import data from the last access from a lo-
cal file, click Previous data.
–
MEMO
The following screen is displayed according to the settings of the
SSL communication. In order to continue the operation, click [Yes]
in either case.
When the SSL communication is not yet
set.
When the SSL communication is already
set.
How to Use the Data Administrator
3
Data Administrator 3-5
4 When the administrator password screen is displayed, enter the ad-
ministrator password of the device and then click [OK].
– Putting a check mark at [Save] dispenses with the entry of the pass-
word on and after the next time.
5 When selecting an item you want to set from the “Function selection”
provided on the left of the screen, make a change to the setting and
then click [Export to the device].
– For details on settings for each device item, refer to Help.
How to Use the Data Administrator
3
Data Administrator 3-6
6 Click [Write].
7 Click [OK].
The administrator setting is written.
How to Use the Data Administrator
3
Data Administrator 3-7
3.5 Single Device Settings
Set abbreviated addresses and other data registered with Data Administra-
tor. Settings items and procedures may vary between devices.
This gives an example using the Generic 45C-1. For settings items and pro-
cedures for other devices, refer to Help.
2
Note
Settings items and procedures may vary between devices. Refer to Help
for details.
Import Information from Device
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Authen-
tication Settings/Address settings] or [Administrator settings] in Func-
tion Selection field.
How to Use the Data Administrator
3
Data Administrator 3-8
3 Set the method for reading the supported device and then click [Im-
port].
– Administrator settings:
Select this to read administrator settings from a device.
– Authentication Settings:
Select this when importing authentication settings from devices.
– Address settings:
Select this when importing address settings from devices.
– Target of importing:
To connect devices and import the most recent data, select Obtain
from the device, and to import data from the last access from a lo-
cal file, click Previous data.
–
MEMO
The following screen is displayed according to the settings of the
SSL communication. In order to continue the operation, click [Yes]
in either case.
When the SSL communication is not yet
set.
When the SSL communication is already
set.
How to Use the Data Administrator
3
Data Administrator 3-9
4 When the administrator password screen is displayed, enter the ad-
ministrator password of the device and then click [OK].
– Putting a check mark at [Save] dispenses with the entry of the pass-
word on and after the next time.
5 Select a setting item from the Function Selection field.
– For details on settings for each device item, refer to Help.
How to Use the Data Administrator
3
Data Administrator 3-10
2
Note
If the SNMP read community name has changed, the
Input SNMP read
community name
will be displayed. Input the read community name,
and click
OK
.
When the SNMP Read Community Name Is Displayed
% Input the SNMP Read community name.
– Read community name : Input the SNMP Read community name.
Import Abbreviated Address Data from CSV Files
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Authen-
tication Settings/Address settings] in Function Selection field.
How to Use the Data Administrator
3
Data Administrator 3-11
3 Set the method for reading the supported device and then click [Im-
port].
– For details of the operation for reading the supported device, refer
to page 3-7.
4 Select [Address book] from the Function selection list.
5 From the [File] menu, select [Import] — [Import each data from the file].
The Open screen appears.
6 Select the import file, and click [Open].
The Import wizard from file screen appears.
How to Use the Data Administrator
3
Data Administrator 3-12
7 Set the starting position, and click [Next].
– Select starting position mode:
To start import from first line of the displayed file, select Import
data from the first line, and to start import from a selected line of
the displayed file, select Import from the selected line.
– Destination type:
Select the destination type. Items that can be selected may differ
depending on the device type and options.
8 Set the import method, and click [Next].
How to Use the Data Administrator
3
Data Administrator 3-13
– Use data following header line:
Select this to use data from following the header line.
– Header Line Number: Specify the header line.
– Tab: Select this when the data to import is delimited with a TAB.
–Comma:
Select this when the data to import is delimited with a comma.
– Semicolon:
Select this when the data to import is delimited with a semicolon.
–Space:
Select this when the data to import is delimited with a space.
–Other:
Select this when the data to import is delimited with a different de-
limiter.
– (max. 1 characters):
If Other is specified, specify the character to use as a delimiter.
– Text qualifier: When setting the OpenAPI connection, click [Detail].
9 Set Item names for data to import in each row, and click [Next].
– Select: Select allocation of import field list items.
– Cancel: Deselect allocation of import field list items.
How to Use the Data Administrator
3
Data Administrator 3-14
10 Set data to import, and click [Import].
– Select: Select data to import into the device. Select data to import
from the list, and click [Select].
– Cancel: Cancel data selection. Select data to delete from the list,
and click [Cancel].
11 When FTP or SMB is selected for the Destination Type, specify the FTP
settings and then click [OK].
– Passive Mode:
Put a check on it when the Passive Mode is used.
– Use Proxy:
Put a check on it when the Proxy is used.
How to Use the Data Administrator
3
Data Administrator 3-15
Import Abbreviated Address Data from an LDAP server
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Authen-
tication Settings/Address settings] in Function Selection field.
3 Set the method for reading the supported device and then click [Im-
port].
– For details of the operation for reading the supported device, refer
to page 3-7.
How to Use the Data Administrator
3
Data Administrator 3-16
4 Select [Address settings] - [Address book] from the Function selection
list.
5 From the [File] menu, select [Import] — [Import (LDAP)].
The Search wizard of LDAP directory screen appears.
6 Set the starting position, and click [Next].
– Select starting position mode:
To start import from first line of the displayed file, select Import
data from the first line, and to start import from a selected line of
the displayed file, select Import from the selected line.
How to Use the Data Administrator
3
Data Administrator 3-17
– Destination type:
Select the destination type. Items that can be selected may differ
depending on the device type and options.
7 Set the search filters, and click [Find].
–Directory name:
Select the LDAP server to search.
– LDAP:
Configure LDAP server settings. Refer to “Device Set-Up User’s
Guide” for details.
– Filter: Search filters include items, conditions, and search words.
–Find:
Searches the LDAP server using the conditions set in the filters.
How to Use the Data Administrator
3
Data Administrator 3-18
8 Confirm search results, and click [Next].
9 Set data to import, and click [Import].
– Select:
Select data to import into the device. Select data to import the list,
and click [Select].
– Cancel: Cancel data selection. Select data to delete from the list,
and click [Cancel].
How to Use the Data Administrator
3
Data Administrator 3-19
10 Select the data imported and then click [Export to the device].
The device information is written.
How to Use the Data Administrator
3
Data Administrator 3-20
Import Abbreviated Address Data from a Previous Device
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Authen-
tication Settings/Address settings] in Function Selection field.
3 Set the method for reading the supported device and then click [Im-
port].
– For details of the operation for reading the supported device, refer
to page 3-7.
How to Use the Data Administrator
3
Data Administrator 3-21
4 When the administrator password screen is displayed, enter the ad-
ministrator password of the device and then click [OK].
5 When the confirmation message of the SSL certificate is displayed,
click [Yes].
6 Select [Address book] from the Function selection list.
7 From the [File] menu, select [Import] — [Import from the previous de-
vice].
The Import from a device screen appears.
How to Use the Data Administrator
3
Data Administrator 3-22
8 Set devices from which to import abbreviated address data, and click
[Import data].
– Select a device:
To select devices from the automatically detected device list,
choose [Select device], and to select connected devices by speci-
fying their IP address or host name, select [Input a device address].
– Refresh: Re-search for devices within a specified search range.
–Search settings:
Set the search range for devices. Refer to “Set Search Range” on
page 3-25 for details.
– Select Device: Select the device model.
– Device Address (max 126 characters):
Input the IP address or the host name of the device.
– For details of the supported device, see the Help.
9 Input the administrator password of the device, and click [OK].
– Depending on a device, the entry of the User ID is required.
How to Use the Data Administrator
3
Data Administrator 3-23
10 Set the import conditions, and click [Next].
– To start import from first line of the displayed file, select Import
data from the first line, and to start import from a selected line of
the displayed file, select Import from the selected line.
11 Select data to import, and click [Select].
– Select:
Select data to import into the device. Select data to import the list,
and click [Select].
– Cancel:
Cancel data selection. Select data to delete from the list, and click
[Cancel].
12 Click [Import].
How to Use the Data Administrator
3
Data Administrator 3-24
13 Select data to be imported and click [Export to the device].
14 Click [Write].
15 Click [OK].
The information of the Address Book that has been read is written into
the device.
How to Use the Data Administrator
3
Data Administrator 3-25
Set Search Range
1 From the “Import from device screen”, click [Search settings].
The Device search settings screen is displayed.
2 Set the search range, click [Add].
– SNMP community name: Input the SNMP community name.
– Start IP: Input the start IP address of the search range.
– End IP: Input the end IP address of the search range.
– Add: Add a search range for devices.
– Delete:
Delete a search range for devices. Select the search range to delete
from the list, and click [Delete].
3 Click [OK].
How to Use the Data Administrator
3
Data Administrator 3-26
3.6 Bulk Copy of Settings
Bulk copy authentication settings and address settings from one device to
multiple devices. Set by following the directions on the bulk copy wizard
screen.
2
Note
These functions may not be available depending on the device or
firmware version.
Copy Settings from One Device to Another Device
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Click [Settings for multiple devices] tab and select [Copy authentication
and address data collectively].
How to Use the Data Administrator
3
Data Administrator 3-27
3 Select the functions to copy and click [Next].
– Authentication:
Select this when copying authentication settings. This clears the
user counter and group counter of the target device.
– Address:
Select this when copying address settings. The program can be
copied if the model and version are the same. Additionally, if option
configuration and destinations on the copy source and copy target
devices differ, then this will be registered with import settings and
communication settings turned OFF.
– Reference Allowed Group:
Select this when copying a group that can be referenced for the
copy source device. The reference group for the copy target will be
cleared.
4 Select the copy source device, and click [Next].
How to Use the Data Administrator
3
Data Administrator 3-28
– Select: Select the copy source device. Select the copy source de-
vice from the list, and click Select.
A local file can also be selected as a copy source device.
– Change password: Change the administrator password for the reg-
istered device.
5 Select the copy target device, and click [Next].
– Select: Select the copy target device. Select the copy target device
from the list, and click Select.
– Unselect: Cancel the selection of devices. Select devices to delete
from the list, and click Unselect.
– Change password: Change the administrator password for the reg-
istered device.
– Clicking [Next] button to export data to the device.: Select this to
start writing to the device without confirming details to copy. Se-
lecting this and clicking Next will start writing to the device. In these
cases, if the Administrator password specified for the device is
wrong, then writing to that device will be aborted.
– For the information of the biometrics authentication and the IC
card, its copy can be made only when the authentication device of
the copy source coincides with that of the copy target. The infor-
mation of these biometrics authentication and IC card can also be
copied from the local files.
How to Use the Data Administrator
3
Data Administrator 3-29
6 Confirm details to copy, and click [Start].
– Please be aware that when copying address settings, address in-
formation for the copy target is cleared and overwritten.
– If [Clicking [Next] button to export data to the device.] is selected in
the “Please select a target device.” screen, then this screen will not
be displayed.
7 When “Normal end” is displayed in the Target device list processing re-
sults, click [Finished].
– When communication is made with the device and the IPV6, write
time may get slower than the normal communication.
– Display a log: Displays a log file for the bulk copy function.
How to Use the Data Administrator
3
Data Administrator 3-30
3.7 Address collective maintenance
It is possible to maintain collectively the Address Book registered with the
Device.
2
Note
These functions may not be available depending on the device or
firmware version.
Address collective maintenance
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Click [Settings for multiple devices] tab and select [Address Book
maintenance].
How to Use the Data Administrator
3
Data Administrator 3-31
3 Select a device from the list that allows the maintenance of the Address
Book, and then click [Select].
– Change password: Change the administrator password for the reg-
istered device.
4 Click [Next].
5 Click [Next].
How to Use the Data Administrator
3
Data Administrator 3-32
6 Click [Next].
– When updating or deleting the information of the Address Book,
click [Select].
– When searching a keyword, click [Search].
– When checking the information of the device, click [Confirm Regis-
tered Device].
7 Click [Add].
– When editing the information of the Address Book, click [Edit].
– When deleting the information of the Address Book, click [Delete].
– When copying the information of the Address Book, click [Add
Copy Data].
– When reading the information of the Address Book from a file, click
[Import from File] to specify the file.
How to Use the Data Administrator
3
Data Administrator 3-33
8 Specify the destination type and click [OK].
9 Set the “Abbreviated name”, “Search character”, “Fax number” and
click [OK].
How to Use the Data Administrator
3
Data Administrator 3-34
10 Click [Next].
11 Click [Start].
How to Use the Data Administrator
3
Data Administrator 3-35
12 Click [Finished].
– When checking the details of the log, click [Display a detailed log].
The Address Book is written into the device.
How to Use the Data Administrator
3
Data Administrator 3-36
3.8 Collective maintenance of user
It is possible to maintain collectively the user information registered with the
Device.
2
Note
These functions may not be available depending on the device or
firmware version.
Collective maintenance of user
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Click [Settings for multiple devices] tab and select [Maintenance of
user data].
How to Use the Data Administrator
3
Data Administrator 3-37
3 Select a device from the list that allows the maintenance of the user in-
formation, and then click [Select].
– Change password: Change the administrator password for the reg-
istered device.
4 Click [Next].
5 Click [Next].
How to Use the Data Administrator
3
Data Administrator 3-38
6 Click [Next].
– When updating or deleting the user information, click [Select].
– When searching a keyword, click [Search].
– When checking the information of the device, click [Confirm Regis-
tered Device].
7 Click [Add].
– When editing the user information, click [Edit].
– When deleting the user information, click [Delete].
– When copying the user information, click [Add Copy Data].
– When reading the user information from a file, click [Import from
File] to specify the file.
How to Use the Data Administrator
3
Data Administrator 3-39
8 Specify the user template and click [OK].
9 Set the “User Name”, “Password”, “E-Mail Address”, “Function restric-
tion”, “The max allowance of counter”, “Vein Authentication”, and click
[OK].
How to Use the Data Administrator
3
Data Administrator 3-40
10 Click [Next].
11 Click [Start].
How to Use the Data Administrator
3
Data Administrator 3-41
12 Click [Finished].
– When checking the details of the log, click [Display a detailed log].
The user information is written into the device.
How to Use the Data Administrator
3
Data Administrator 3-42
3.9 Account maintenance
It is possible to maintain collectively the section registered with the Device.
2
Note
These functions may not be available depending on the device or
firmware version.
Account maintenance
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Click [Settings for multiple devices] tab and select [Account mainte-
nance].
How to Use the Data Administrator
3
Data Administrator 3-43
3 Select the account track method and click [Next].
4 Select a device from the list that allows the maintenance of the section
information, and then click [Select].
– Change password: Change the administrator password for the reg-
istered device.
5 Click [Next].
How to Use the Data Administrator
3
Data Administrator 3-44
6 Click [Next].
7 Click [Next].
– When updating or deleting the section information, click [Select].
– When searching a keyword, click [Search].
– When checking the information of the device, click [Confirm Regis-
tered Device].
How to Use the Data Administrator
3
Data Administrator 3-45
8 Click [Add].
– When editing the section information, click [Edit].
– When deleting the section information, click [Delete].
– When copying the section information, click [Add Copy Data].
– When reading the section information from a file, click [Import from
File] to specify the file.
9 Specify the account template and click [OK].
How to Use the Data Administrator
3
Data Administrator 3-46
10 Set the “Account Name”, “Password”, “Permitted function”, “Max Al-
lowance of counter”, and click [OK].
11 Click [Next].
How to Use the Data Administrator
3
Data Administrator 3-47
12 Click [Start].
13 Click [Finished].
– When checking the details of the log, click [Display a detailed log].
The section information is written into the device.
How to Use the Data Administrator
3
Data Administrator 3-48
3.10 Change Date and Time
Edit device date and time registered with Data Administrator.
2
Note
This may not be supported by all devices.
Change Device Date and Time
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Click [Settings for multiple devices] tab and select [Set the time and
day collectively].
How to Use the Data Administrator
3
Data Administrator 3-49
3 Select the device to change from the list, select [Select].
– The selection of two or more devices can be made.
4 Click [Next].
5 Click [Setting].
How to Use the Data Administrator
3
Data Administrator 3-50
6 Set the date and time, and click [Change settings].
– Set to the date and time of the PC:
Select this to set the date and time to that of the PC upon which
Data Administrator is being used.
– NTP Server setting: Selected when synchronized with the NTP
server. Enter the NTP server address and the port No.
– Manual Setting:
Select this to manually set the date and time.
Year/Month/Day: Select the date.
Hour(s): Input the time (hours).
Minute(s): Input the time (minutes).
7 Click [Change password].
8 Click [Update] to change the date and time settings.
9 Click [Finished].
The date and time are changed.
How to Use the Data Administrator
3
Data Administrator 3-51
3.11 Automatic Creation of Boxes
Configure the automatic creation of boxes when users are added. This set-
ting can be used for both single device settings and bulk copy.
Configure Automatic Box Creation
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Enable automatic user box creation], and click [OK].
– Enable automatic user box creation:
Select this to enable automatic creation of boxes when users are
added. Enabling this function when very large numbers of users (for
example several hundred) are added will make writing operations
take a very long time. When large numbers of users are being writ-
ten to the device, it is recommended that this function be disabled.
– Disable automatic user box creation:
Select this to disable automatic creation of boxes when users are
added.
Box settings are configured.
How to Use the Data Administrator
3
Data Administrator 3-52
2
Note
Box settings are automatically created with the following settings.
User Box Name: User box ID
Password: Not set
Search key: etc
How to Use the Data Administrator
3
Data Administrator 3-53
3.12 Processing Options
While in use of the function of the collective handling, the handling method
is specified when the checkup log of the device fills up near to the capacity.
Set the Processing Options
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Processing Options], and click [OK].
– Stop processing:
The handling is stopped when the checkup log of the device fills up
near to the capacity.
– Continue processing:
Even if the checkup log of the device is filled nearly up to capacity,
proceed with the handling.
Processing Options are configured.
How to Use the Data Administrator
3
Data Administrator 3-54
3.13 Authentication Mode Template Settings
Create a template for when configuring the device authentication mode. Up
to a maximum of 100 items can be registered in templates, and 5 system
templates are pre-configured.
Create Authentication Mode Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Authentication mode template] from the Target of setting area.
4 Click [Add].
How to Use the Data Administrator
3
Data Administrator 3-55
5 Set the Authentication mode, and click [OK].
– Authentication mode:
In Authentication mode,[ User Authentication only], [User Authenti-
cation and Account Track], and [Account Track only] can be select-
ed.
– Account Track:
If Account Track only is selected in Authentication mode, then [The
input method is Account name and password], and [The input
method is only password] can be selected.
6 Configure the template, and click [OK].
How to Use the Data Administrator
3
Data Administrator 3-56
– Template name: Input the name of the template to create.
–Setting:
Set the authentication mode. Refer to “Authentication Mode Tem-
plate Setting Items” on page 4-1 for details.
The template is created.
Edit Authentication Mode Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Authentication mode template] from the Target of setting area.
4 Select template to edit from the list and click [Edit].
How to Use the Data Administrator
3
Data Administrator 3-57
5 Configure the template, and click [OK].
– Refer to p. 3-54 for more information about setting methods.
The template is edited.
2
Note
The names of the 5 system templates can not be changed.
How to Use the Data Administrator
3
Data Administrator 3-58
Delete Authentication Mode Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Authentication mode template] from the Target of setting area.
4 Select template to delete from the list and click [Delete].
5 Click [Yes].
The Authentication mode template is deleted.
2
Note
The 5 system templates can not be deleted.
How to Use the Data Administrator
3
Data Administrator 3-59
3.14 User Template Settings
Create a template for when configuring users. Up to a maximum of 100 items
can be registered in templates, and 1 system template is pre-configured.
Create User Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [User template] from the Target of setting area.
4 Click [Add].
How to Use the Data Administrator
3
Data Administrator 3-60
5 Configure the template, and click [OK].
– Template name:
Input the name of the template to create.
– Function restriction:
Select permissions for each function restriction.
– Total:
Select this to configure the total number of pages that can be print-
ed by the user. Selecting this will deselect Color and Black.
– Color:
Select this to configure the total number of color pages that can be
printed by the user. Selecting this will deselect Total.
–Black:
Select this to configure the total number of black pages that can be
printed by the user. Selecting this will deselect Total.
– Max Allowance:
Input the maximum allowance for each counter.
The template is created.
How to Use the Data Administrator
3
Data Administrator 3-61
2
Note
The range of maximum values for maximum allowances may vary de-
pending on the device.
An error may occur when selecting and adding a template in the Import
device information screen. In these cases, ensure that the maximum al-
lowance is within the maximum range for the device.
Edit User Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [User template] from the Target of setting area.
4 Select template to edit from the list and click [Edit].
How to Use the Data Administrator
3
Data Administrator 3-62
5 Configure the template, and click [OK].
– Refer to p. 3-59 for more information about setting methods.
The template is edited.
How to Use the Data Administrator
3
Data Administrator 3-63
Delete User Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [User template] from the Target of setting area.
4 Select template to delete from the list and click [Delete].
5 Click [OK].
The template is deleted.
2
Note
System templates can not be deleted.
How to Use the Data Administrator
3
Data Administrator 3-64
Set Default User Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [User template] from the Target of setting area.
4 Select template to make default from the list and click [Set Default].
The default template is set.
2
Note
The default template is indicated with a “*”.
If When the user is added, a default template is automatically applied is
selected, the default user template will be applied when creating a new
user, and the screen for selecting a template will not be displayed.
How to Use the Data Administrator
3
Data Administrator 3-65
3.15 Account Template Settings
Create a template for when configuring groups. Up to a maximum of 100
templates can be set.
Create Account Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Account template] from the Target of setting area.
4 Click [Add].
How to Use the Data Administrator
3
Data Administrator 3-66
5 Configure the template, and click [OK].
– Template name:
Input the name of the template to create.
– Function restriction:
Select permissions for each function restriction.
– Total:
Select this to configure the total number of pages that can be print-
ed by the account. Selecting this will deselect [Color] and [Black].
– Color:
Select this to configure the total number of color pages that can be
printed by the account. Selecting this will deselect [Total].
–Black:
Select this to configure the total number of black pages that can be
printed by the account. Selecting this will deselect [Total].
– Max Allowance: Input the maximum allowance for each counter.
The template is created.
How to Use the Data Administrator
3
Data Administrator 3-67
2
Note
The range of maximum values for maximum allowances may vary de-
pending on the device.
An error may occur when selecting and adding a template in the Import
device information screen. In these cases, ensure that the maximum al-
lowance is within the maximum range for the device.
Edit Account Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Account template] from the Target of setting area.
4 Select template to edit from the list and click [Edit].
How to Use the Data Administrator
3
Data Administrator 3-68
5 Configure the template, and click [OK].
– Refer to p. 3-65 for more information about setting methods.
The template is edited.
How to Use the Data Administrator
3
Data Administrator 3-69
Delete Account Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Account template] from the Target of setting area.
4 Select template to delete from the list and click [Delete].
5 Click [Yes].
The Account template is deleted.
How to Use the Data Administrator
3
Data Administrator 3-70
Set Default Account Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3 Select [Account template] from the Target of setting area.
4 Select template to make default from the list and click [Set Default].
The default template is set.
2
Note
The default template is indicated with a “*”.
If When the account is added, a default template is automatically applied
is selected, the default group template will be applied when creating a
new group, and the screen for selecting a template will not be displayed.
How to Use the Data Administrator
3
Data Administrator 3-71
3.16 Weekly Timer Template Settings
Create a template for when configuring device weekly timers.
The Weekly timer template can be used for Administrator settings’ Power
supply management and for Weekly timer. Additionally, up to a maximum of
100 templates can be set.
Create Weekly Timer Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Administrator setting option] from the [Tool] menu.
3 Select [Weekly Timer template] from the Target of setting area.
4 Click [Add].
How to Use the Data Administrator
3
Data Administrator 3-72
5 Configure the template, and click [OK].
– Template name: Input the name of the template to create.
–Setting:
Configure the weekly timer. Refer to “Weekly Timer Template Set-
ting Items” on page 4-3 for details on settings items.
The template is created.
How to Use the Data Administrator
3
Data Administrator 3-73
Edit Weekly Timer Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Administrator setting option] from the [Tool] menu.
3 Select [Weekly Timer template] from the Target of setting area.
4 Select template to edit from the list and click [Edit].
How to Use the Data Administrator
3
Data Administrator 3-74
5 Configure the template, and click [OK].
– Refer to p. 3-71 for more information about setting methods.
The template is edited.
How to Use the Data Administrator
3
Data Administrator 3-75
Delete Weekly Timer Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Administrator setting option] from the [Tool] menu.
3 Select [Weekly Timer template] from the Target of setting area.
4 Select template to delete from the list and click [Delete].
5 Click [OK].
The template is deleted.
How to Use the Data Administrator
3
Data Administrator 3-76
3.17 IP Filtering Template Settings
Create a template for when configuring device IP filtering.
The IP Filtering Templates can be used for Administrator settings’ Network
settings, TCP-IP settings, and IP filtering settings. Up to a maximum of 100
templates can be set.
Create IP Filtering Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Administrator setting option] from the [Tool] menu.
3 Select [IP filtering template] from the Target of setting area.
4 Click [Add].
How to Use the Data Administrator
3
Data Administrator 3-77
5 Configure the template, and click [OK].
– Template name:
Input the name of the template to create.
– Enable IP address permission settings:
Select this to enable configuration of IP address filtering.
–Edit:
Configure permitted IP address ranges.
The Edit IP address range screen is displayed. Input the start and
end IP addresses, and click [OK].
– Clear:
Clear the permitted IP address range. Select the permitted IP ad-
dress range from the list, and click [Clear].
– Enable the IP address exclusion settings:
Select this to enable exclusion settings for IP address filtering.
–Edit:
Configure IP address exclusion ranges.
The Edit IP address range screen is displayed. Input the start and
end IP addresses, and click [OK].
– Clear:
Clear the IP address exclusion range. Select the IP address exclu-
sion range from the list, and click [Clear].
The template is created.
How to Use the Data Administrator
3
Data Administrator 3-78
Edit IP Filtering Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Administrator setting option] from the [Tool] menu.
3 Select [IP filtering template] from the Target of setting area.
4 Select template to edit from the list and click [Edit].
How to Use the Data Administrator
3
Data Administrator 3-79
5 Configure the template, and click [OK].
– Refer to p. 3-76 for more information about setting methods
The template is edited.
How to Use the Data Administrator
3
Data Administrator 3-80
Delete IP Filtering Templates
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select [Option] - [Administrator setting option] from the [Tool] menu.
3 Select [IP filtering template] from the Target of setting area.
4 Select template to delete from the list and click [Delete].
5 Click [OK].
The template is deleted.
How to Use the Data Administrator
3
Data Administrator 3-81
3.18 Backup / Restoration of Address and Authentication
It is possible to write the Address and the Authentication data that have been
read from the device to restore them as backup files.
Backup of Address and Authentication data
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Authen-
tication Settings/Address settings] in Function Selection field.
How to Use the Data Administrator
3
Data Administrator 3-82
3 Set the method for reading the supported device and then click [Im-
port].
–
MEMO
The following screen is displayed according to the settings of the
SSL communication. In order to continue the operation, click [Yes]
in either case.
When the SSL communication is not yet
set.
When the SSL communication is already
set.
How to Use the Data Administrator
3
Data Administrator 3-83
4 When the administrator password screen is displayed, enter the ad-
ministrator password of the device and then click [OK].
– Putting a check mark at [Save] dispenses with the entry of the pass-
word on and after the next time.
5 Select [Backup of Address and Authentication data] from the [File]
menu.
6 When the location is specified into which the backup files are saved,
click [Save].
How to Use the Data Administrator
3
Data Administrator 3-84
7 Enter the Encryption password of the backup file and then click [OK].
8 When the confirmation message is displayed, click [OK].
The backup file is written.
How to Use the Data Administrator
3
Data Administrator 3-85
Restoration of Address data
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Authen-
tication Settings/Address settings] in Function Selection field.
3 Set the method for reading the supported device and then click [Im-
port].
How to Use the Data Administrator
3
Data Administrator 3-86
–
MEMO
The following screen is displayed according to the settings of the
SSL communication. In order to continue the operation, click [Yes]
in either case.
4 When the administrator password screen is displayed, enter the ad-
ministrator password of the device and then click [OK].
– Putting a check mark at [Save] dispenses with the entry of the pass-
word on and after the next time.
When the SSL communication is not yet
set.
When the SSL communication is already
set.
How to Use the Data Administrator
3
Data Administrator 3-87
5 Select [Address settings] from the Function selection field and then se-
lect [Restoration of Address data] from the [File] menu.
6 Specify the backup file to be restored and then click [Open].
7 Enter the Encryption password of the backup file and then click [OK].
The Address data is restored.
How to Use the Data Administrator
3
Data Administrator 3-88
Restoration of Authentication data
1 Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2 Select the device to import information from the list and click [Authen-
tication Settings/Address settings] in Function Selection field.
3 Set the method for reading the supported device and then click [Im-
port].
How to Use the Data Administrator
3
Data Administrator 3-89
–
MEMO
The following screen is displayed according to the settings of the
SSL communication. In order to continue the operation, click [Yes]
in either case.
4 When the administrator password screen is displayed, enter the ad-
ministrator password of the device and then click [OK].
– Putting a check mark at [Save] dispenses with the entry of the pass-
word on and after the next time.
When the SSL communication is not yet
set.
When the SSL communication is already
set.
How to Use the Data Administrator
3
Data Administrator 3-90
5 Select [Authentication settings] from the Function selection field and
then select [Restore authentication settings] from the [File] menu.
6 Specify the backup file to be restored and then click [Open].
7 Enter the Encryption password of the backup file and then click [OK].
How to Use the Data Administrator
3
Data Administrator 3-91
8 Set the Authentication setting restore and then click [Next].
– Set to backed up value:
Put a check on it when the Account and User counters are also re-
stored.
– Set to zero:
Put a check on it when the Account and User counters are reset to
0.
– Reference Allowed Group - Restore:
The Reference Allowed Group of the Administrator setting is also
restored.
– Reference Allowed Group - Do not restore:
The Reference Allowed Group is not restored.
9 Click [Start].
How to Use the Data Administrator
3
Data Administrator 3-92
10 Click [Finished].
The authentication settings is restored.
APPENDIX
4
Data Administrator 4-1
4 APPENDIX
4.1 Authentication Mode Template Setting Items
Settings item name Details
When number of jobs
reach maximum
Select Job skip to suspend only that job, and to continuing normal
processing of other jobs when the number of jobs reaches the max-
imum.
Select Stop to suspend all subsequent jobs when the number of
jobs reaches the maximum.
The allocation of the
number of users
Set the ratio of the number of users and the number of accounts be-
tween 1 and 999.
Synchronize user and
account
To synchronize users and accounts, select Synchronize.
To not synchronize users and accounts, select Do not synchronize.
Print the non-authenti-
cated user or account
To synchronize printing of non-authenticated users or accounts, se-
lect Allow.
To not synchronize printing of non-authenticated users or accounts,
select Restrict.
Display the user list in
the panel
To display the user list in the device panel, select On.
To not display the user list in the device panel, select Off.
Public user To permit public users, select Allow.
To not permit public users, select Restrict.
Permit copy function of
public user
To permit copy functions for public users, select Allow.
To not permit copy functions for public users, select Restrict.
Permit scan function of
public user
To permit scan functions for public users, select Allow.
To not permit scan functions for public users, select Restrict.
Permit fax function of
public user
To permit fax functions for public users, select Allow.
To not permit fax functions for public users, select Restrict.
Permit user box access
of public user
To permit box access for public users, select Allow.
To not permit box access for public users, select Restrict.
Permit print function of
public user
To permit print functions for public users, select Allow.
To not permit print functions for public users, select Restrict.
Permit print of transmit
function for public user
To permit print for transmit functions for public users, select Allow.
To not permit print for transmit functions for public users, select Re-
strict.
Permit color function of
public user
To permit color print functions for public users, select Allow.
To not permit color print functions for public users, select Restrict.
APPENDIX
4
Data Administrator 4-2
Permit black function of
public user
To permit black print functions for public users, select Allow.
To not permit black print functions for public users, select Restrict.
Permit Color transmit
function of public user
To permit color image transmit functions for public users, select Al-
low.
To not permit color image transmit functions for public users, select
Restrict.
Authentic method To authenticate on the device, select Device.
To authenticate on a network server, select Server.
Network server type set-
tings
To authenticate on the SMB server, select SMB.
To authenticate on the NDS server, select NDS.
To authenticate on the Active Directory server, select Active Direc-
tory.
Domain name (ActiveDi-
rectory)
If “Active Directory” is selected as the external server type, then in-
put the Active Directory domain name.
Domain name (SMB) If “SMB” is selected as the external server type, then input the SMB
domain name.
NDS tree name If “NDS” is selected as the external server type, then input the NDS
tree name.
NDS context name If “NDS” is selected as the external server type, then input the NDS
context name.
Copy permission of out-
side user.
To permit copy functions for public users authenticated on a network
server, select Allow.
To not permit copy functions for public users authenticated on a net-
work server, select Restrict.
Scan permission for out-
side user.
To permit scan functions for public users authenticated on a network
server, select Allow.
To not permit scan functions for public users authenticated on a net-
work server, select Restrict.
Fax permission of out-
side user.
To permit fax functions for public users authenticated on a network
server, select Allow.
To not permit fax functions for public users authenticated on a net-
work server, select Restrict.
User box access permis-
sion for outside user.
To permit box functions for public users authenticated on a network
server, select Allow.
To not permit box functions for public users authenticated on a net-
work server, select Restrict.
Print permission for out-
side user.
To permit printing by users authenticated on a network server, select
Allow.
To not permit printing by users authenticated on a network server,
select Restrict.
Settings item name Details
APPENDIX
4
Data Administrator 4-3
4.2 Weekly Timer Template Setting Items
4.3 What Do I Do If this Message Is Displayed?
Permit print of transmit
function for outside user
To permit print for transmit functions for public users authenticated
on a network server, select Allow.
To not permit print for transmit functions for public users authenti-
cated on a network server, select Restrict.
Settings item name Details
Settings item name Details
Mon. ~ Sun. Set timer individually for each day.
• Restrict usage times: Select this to configure the timer for this
day.
• Usage start: set from 00: 00 to 23: 59.
• Usage end: set from 00: 00 to 23: 59.
Off function settings at
lunchtime
Specify whether or not to turn the device power off at the specified
time.
• Off at lunchtime: Select this in order to turn the device power off
at the specified time.
• Lunchtime OFF: set from 00: 00 to 23: 59.
• Restart time: set from 00: 00 to 23: 59.
Set a password for using
during off-hours
Set this in order to enable use of the device while the weekly timer
has turned the device power off.
• Use during off-hours: Select this in order to enable use of the de-
vice while the weekly timer has turned the device power off.
• Password: Input the password with a maximum of 8 characters.
Message Details of Error
Please input appropriate
IP address
Incorrect IP address range. Change the end IP value.
Duplication error Identical data is already registered. Identical data can not be regis-
tered.
LDAP connection error Confirm that LDAP server data in the LDAP server settings is correct.
Failed to update XXXXX Failure in refreshing XXXXX device data. Confirm that the device is
ready, and try again.
Failed to delete XXXXX Failure in deleting XXXXX device data. Confirm that the device is
ready, and try again.
Failed to set XXXXX Failure in writing XXXXX device data. Confirm that the device is
ready, and try again.
Failed to get XXXXX Failure in acquiring XXXXX device data. Confirm that the device is
ready, and try again.
A data is empty Displayed if there is no data in the device to be read, when importing
data from a device using the import from device function.
The password is differ-
ent
The input password and that input for confirmation do not match. In-
put both passwords again.
APPENDIX
4
Data Administrator 4-4
File format error A file that can not be imported has been selected. This file format is
not supported by this application.
A file format is not right The file format is incorrect. Confirm that the backup data is for this
device model, and that it is not data stored in a different location.
Log-in error You can not log in to the device. Check the password (and user-
name) and try again.
No searching data The corresponding data does not exist. Select a different file (or
change LDAP search filters).
Selected file format error The selected file is invalid. Select another file.
Communication error Communication error with the device. Confirm that network cables
are connected, and that the device is switched on.
Failed to import data Failure in importing data from the device. Confirm the connection
with the device, and attempt import again.
Input error Characters that can not be input have been used. Input characters
that are permitted.
Data length error The permissible input range is exceeded. Input the permitted
number of characters.
A value is empty Required input fields are missing. Ensure you input all required
fields.
Multiple applications
cannot be started simul-
taneously
More than one instance of this software can not be started on the
same PC at the same time.
Error : Device locked: If
any one of the following
events occurs, it is not
able to write in the de-
vice. Please confirm the
situation and retry it. Job
is suspended in the de-
vice. Log into the device
by an administrator. Job
is doing in the device.
If any of the circumstances at left apply, then resolve the issue, and
then write to the device. (For example, if jobs are backed up on the
device, then either remove these jobs, or wait for all jobs to complete
before attempting to write to the device.)
Failed to change the user
box owner
Failure in processing a change in the box owner. Reconfigure set-
tings.
The change authentica-
tion mode wizard is not
able to boot up because
data are updated. Please
retry after writing it to the
device
If Change authentication mode and Change counter range functions
are different to settings for the device and its applications, then the
functions can not be run. Write data that is being updated or added,
or refresh device information, then run the application.
Device data is changed
from other application
Settings on the device were changed when editing with Data Admin-
istrator. In this state, writing to the device is not possible. Import
from the device again, and edit.
Device of non-SSL com-
munication is detected.
Continue? (If you want to
activate SSL, visit Web
Connection and activate
the SSL settings of
‘OpenAPI’.)
With non-SSL transmission, data is transmitted across the network
in a non-encrypted form. It is recommended that you enable SSL for
devices in Web Connection, and then configure.
Message Details of Error
APPENDIX
4
Data Administrator 4-5
Required field error Required input fields are missing. Ensure you input all required
fields.
Error: Input length over The input text string exceeds permissible lengths. Input a text string
that does not exceed these limits.
Error: unavailable char-
acter is used
Characters that can not be used have been used. Input characters
that are permitted.
Error: the numerical val-
ue is not set
Input numerical values.
Error: range over Input numerical values within the range.
The object is not chosen Select a device from the list.
Duplicate device IP ad-
dresses exist
The same device is already in the list. The same device can not be
displayed in the list.
Timeout error Timeout error. Check the network connection, and that the device is
switched on.
There is a possibility that
the SNMP read commu-
nity name is changed.
Please input a correct
community name.
This is displayed if the SNMP read community name has been
changed. Input a correct SNMP community name for the device.
It is not able to be started
up because the neces-
sary DLL is not able to be
loaded
Check that the application is correctly installed. Additionally, check
that the supported plug-ins on the device that is being used to carry
out settings are correctly installed.
There is no external ap-
plication
In order to start HDD Backup Utility and other network tools, these
tools need to be installed. Install these tools, and try again.
Fail to change IP ad-
dress.
Try again, or configure using the device operations panel.
Model is different To register a device in “Register from IP address”, ensure that the
device model is correct. In this case, delete the device from device
registration, and carry out registration again.
Unknown error An unknown error has occurred. Close the application, then recon-
figure settings.
Since “Password Rule”
of a device's administra-
tor settings is “ON”,
please set up the pass-
word of eight or more
characters. Moreover, it
cannot set to the pass-
word of only the same
character.
When password rules are turned ON in device administration set-
tings, then passwords that have under 8 characters, or that have all
the same characters may not be used. To use passwords such as
these, ensure that password regulations are turned OFF.
Message Details of Error
2008. 1
Use
Data
C
op
y
r
i
g
h
t
A
ll
r
i
g
h
t
s
re
s
er
v
ed
.
2005
… 21 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oce User Manual Data Administrator bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oce User Manual Data Administrator in de taal/talen: Engels als bijlage per email.

De handleiding is 2,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info