47238

Oce User Manual Copy Protection Utility Handleiding

2
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
User’s Guide
4343-PS222-02
Font Management Utility
Font Management Utility i
Contents
1Introduction
1.1 Operating environment ..................................................................... 1-1
1.2 Main functions ...................................................................................1-2
2 Installing Font Management Utility
2.1 Installation .........................................................................................2-1
To install ......................................................................................... 2-1
2.2 Uninstallation .....................................................................................2-1
To uninstall ..................................................................................... 2-1
3 Using Font Management Utility
3.1 Starting Font Management Utility ....................................................3-1
To start ........................................................................................... 3-1
3.2 Quiting Font Management Utility .....................................................3-2
To quit ............................................................................................ 3-2
3.3 Selecting and adding devices ..........................................................3-3
3.3.1 Manually adding devices ................................................................ 3-3
To add a device .............................................................................. 3-3
3.3.2 Searching for and adding devices .................................................. 3-7
To add a device .............................................................................. 3-7
3.3.3 Specifying the search range ......................................................... 3-10
To specify the search range ......................................................... 3-10
3.4 Add/Delete Mode ............................................................................3-15
Main dialog box ............................................................................ 3-15
To add fonts and forms ................................................................3-16
To delete fonts and forms ............................................................ 3-22
3.5 Add Collectively Mode ....................................................................3-25
Main dialog box ............................................................................ 3-25
Add Collectively procedure .......................................................... 3-27
3.6 Delete Collectively Mode ................................................................3-30
Main dialog box ............................................................................ 3-30
Delete Collectively procedure ...................................................... 3-31
Font Management Utility ii
3.7 Font/form list settings file .............................................................. 3-35
In Add/Delete Mode ..................................................................... 3-35
In Add Collectively Mode .............................................................3-37
3.8 Saving lists as files .......................................................................... 3-39
To save a list .................................................................................3-39
3.9 Other settings ..................................................................................3-40
3.9.1 Default Password settings for registered devices. ....................... 3-40
Settings procedure ....................................................................... 3-40
Font Management Utility iii
About this Product
Font Management Utility is a utility that allows you to add and delete the
fonts and the forms for printing overlays of the supported devices (MFPs)
that are on a network.
You can display a list of fonts and forms that were added with Font Manage-
ment Utility.
Trademarks and registered trademarks
Trademark acknowledgements
Microsoft
®
and Windows
®
are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
All other company and product names are either trademarks or registered
trademarks of their respective companies.
Dialog boxes
The dialog boxes shown in this manual are those that appear in Windows XP.
2
Note
The dialog boxes that appear in this document may differ from those that
appear on your computer, depending on the installed devices and spec-
ified settings.
2
Note
Unauthorized reproduction, translation or duplication of this document,
whether in its entirety or in part, is strictly prohibited.
The content of this document is subject to change without notice.
Font Management Utility iv
Introduction
1
Font Management Utility 1-1
1 Introduction
1.1 Operating environment
The operating environment of Font Management Utility is described below.
Supported operating
systems
Windows XP, Windows Server 2003, Windows 2000 (Service Pack 4 or
later)
Available hard-disk
space
200 MB or more (during installation)
Supported fonts and
forms
PCL fonts PCL-compliant font data
PCL forms PCL-compliant macro data
PostScript fonts PostScript type 1 fonts (PFA or PFB)
PostScript forms PS or EPS
Other Microsoft .NET Framework 1.1 or later
(included in the install program)
Introduction
1
Font Management Utility 1-2
1.2 Main functions
The main functions of Font Management Utility are described below.
- Adds and deletes the fonts and forms of the supported MFP.
- Displays the information of the added fonts and forms in a list.
- Saves font/form settings files
- Saves files (CSV file) of the font and form list.
- Automatically detects the supported MFPs that are on a network.
- Manual connection to the supported MFPs that are on a network.
Installing Font Management Utility
2
Font Management Utility 2-1
2 Installing Font Management Utility
2.1 Installation
Install Font Management Utility by following the procedure described below.
To install
1 Double-click Setup.exe.
2 Follow the on-screen instructions to install.
2.2 Uninstallation
Uninstall Font Management Utility by following the procedure described be-
low.
To uninstall
1 From the Start menu, click Control Panel (for Windows 2000, Settings
— Control Panel) to open the Control Panel.
2 Double-click Add or Remove Programs (for Windows 2000, Add/Re-
move Programs).
3 From the installed programs list, select Font Management Utility, and
then click the Remove button.
4 When the program deletion confirmation dialog box appears, click the
Yes button.
This starts the unistallation procedure.
Installing Font Management Utility
2
Font Management Utility 2-2
Using Font Management Utility
3
Font Management Utility 3-1
3 Using Font Management Utility
3.1 Starting Font Management Utility
Start Font Management Utility by following the procedure described below.
To start
1 From the Start menu, click All Programs (for Windows 2000, Pro-
grams)—MFP Utility—Font Management Utility—Font Manage-
ment Utility.
– If a shortcut was created during the installation of Font Manage-
ment Utility, double-click the shortcut on the desktop.
The Mode choice dialog box is displayed.
2 Select the operation mode.
–Select Add/Delete to add or delete fonts/forms to or from a single
device. (“Add/Delete Mode” on page 3-15)
–Select Add Collectively to add fonts/forms to multiple devices.
(“Add Collectively Mode” on page 3-25)
–Select Delete Collectively to delete fonts/forms from multiple de-
vices. (“Delete Collectively Mode” on page 3-30)
Using Font Management Utility
3
Font Management Utility 3-2
3 Click OK.
– Main dialog boxes for each of these operation modes will be dis-
played.
3.2 Quiting Font Management Utility
Quit the Font Management Utility by following the procedure described be-
low.
To quit
1 From the File menu, click Exit.
The dialog box to confirm quiting Font Management Utility appears.
2 Click the Yes button.
This quits Font Management Utility.
Using Font Management Utility
3
Font Management Utility 3-3
3.3 Selecting and adding devices
Before operation, the device must be registered in the Font Management
Utility.
This section describes registering a device in the Font Management Utility.
The two types of lists for selecting a device are described below.
3.3.1 Manually adding devices
To manually add a device to the registered device list, follow the procedure
described below.
To add a device
1 From the Mode choice dialog box, select an operation mode, and click
OK.
Device list Method for adding devices to a list
Registered device list Enters the device name and IP address and connects manually.
Search result list Searches and detects automatically the devices on a network.
2
Note
The automatically detected device can also be added to
the registered device list.
For further details, refer to “Searching for and adding de-
vices” on page 3-7.
Using Font Management Utility
3
Font Management Utility 3-4
Main dialog boxes for each of the selected operation modes will be dis-
played.
2 From the Device menu, select Device Registration.
The Device registration dialog box will be displayed.
Using Font Management Utility
3
Font Management Utility 3-5
3 Click Register from IP address.
– If changing the name of a registered device, select the device, and
click Edit. Change the device name from the Register from IP ad-
dress dialog box that is displayed.
– If deleting a registered device, select the device, and click Delete.
The Register from IP address dialog box is displayed.
4 Input the Registration name and Device Address to add.
– To save an Administrator password for the device, select Save the
Administrator password, and input an Administrator password.
– To save the OpenAPI Username and Password, click Detailed Set-
tings. The Device detail settings dialog box is displayed. Input the
OpenAPI Username and Password.
– Click Test Connection to use the specified information to carry out
a device connection test.
Using Font Management Utility
3
Font Management Utility 3-6
5 Click OK.
The device will be added to the Device registration dialog box.
Using Font Management Utility
3
Font Management Utility 3-7
3.3.2 Searching for and adding devices
Font Management Utility can search for and automatically detect a support-
ed device that is on a network.
Also, the detected device can be added to the registered device list.
Add a device to the registered list by following the procedure described be-
low.
To add a device
1 From the Mode choice dialog box, select an operation mode, and click
OK.
Using Font Management Utility
3
Font Management Utility 3-8
Main dialog boxes for each of the selected operation modes will be dis-
played.
2 From the Device menu, select Device Registration.
The Device registration dialog box will be displayed.
Using Font Management Utility
3
Font Management Utility 3-9
3 Click Search and Register.
The Registration by search dialog box will be displayed, and devices
automatically detected by the network will be displayed in a list.
4 Select the devices to add.
– To refresh the search results, click Re-search.
– To specify the device search range, click Search settings. For de-
tails on setting the search range, please refer to “Specifying the
search range” on page 3-10.
– To select all devices, click Select All. This places a check mark in
all the check boxes.
– To select all unregistered devices, click Select all unregistered
devices. This places a check mark in all the check boxes for unreg-
istered devices.
– To remove all check marks, click Clear All.
Using Font Management Utility
3
Font Management Utility 3-10
5 Click OK.
The device will be added to the Device registration dialog box.
3.3.3 Specifying the search range
You can specify the search range when searching for a device that is on a
network.
Specify the search range by following the procedure described below.
To specify the search range
1 From the Mode choice dialog box, select an operation mode, and click
OK.
Using Font Management Utility
3
Font Management Utility 3-11
Main dialog boxes for each of the selected operation modes will be dis-
played.
2 From the Device menu, select Device Registration.
The Device registration dialog box will be displayed.
Using Font Management Utility
3
Font Management Utility 3-12
3 Click Search and Register.
The Registration by search dialog box will be displayed.
4 Click Search settings.
The Search range specification dialog box will be displayed, and the
registered search settings will be displayed in a list.
Using Font Management Utility
3
Font Management Utility 3-13
5 Click Add.
– If changing registered search settings information, select the
search settings, and click Edit.
On the displayed Device search settings dialog box, change the
settings.
– If deleting registered search settings, select the search settings,
and click Delete.
The Device search settings dialog box is displayed.
6 Input settings values.
– Search range settings: Set the IP addresses to search. The initial
value will be the IP address of the computer upon which the Font
Management Utility is configured.
– Subnet Mask: Set the subnet mask to search.
– Search settings for SNMP V1/V2: Configure the SNMPv1 and
SNMPv2 community name.
– SNMP V3 search settings: Configure the SNMPv3 user name and
context name.
– UDP Port Number: Configure the UDP port number for device
SNMP settings.
Using Font Management Utility
3
Font Management Utility 3-14
7 Click OK.
Search settings are added to the Search range specification dialog
box.
Using Font Management Utility
3
Font Management Utility 3-15
3.4 Add/Delete Mode
Add/Delete Mode lets a user add or delete fonts/forms to or from a single de-
vice.
This section explains the layout of the Add/Delete Mode dialog box, as well
as procedures for adding and deleting fonts/forms.
Before using Add/Delete Mode, the device must be registered in the Font
Management Utility. For details on how to register a device, please refer to
“Selecting and adding devices” on page 3-3.
Main dialog box
12
7
8
9
10
34
5
6
No. Name Description
1 File You can save each list as a file (CSV file) and quit Font Management Util-
ity.
For saving a list as a file, refer to “Saving lists as files” on page 3-39.
2 Mode Switches the operation mode.
Using Font Management Utility
3
Font Management Utility 3-16
To add fonts and forms
1 From the Mode choice dialog box, select Add/Delete, and click OK.
3 Device Enables registration of the device, and setting of the default device pass-
word.
4 Help You can display the Help of Font Management Utility and check the ver-
sion information.
5 Device Displays the device names displayed in a list.
6 Change Click to display the selection dialog box of the device.
For selecting a device, refer to “Selecting and adding devices” on
page 3-3.
7 Font/Form You can select the font and form types displayed in a list from the drop-
down list. The types that can be selected include PCL Font List, PCL
Form List, PostScript Font List, PostScript Form List, and All.
8 List of Font/
Form
Displays the fonts and forms that are added to the selected device in the
list.
The list can be displayed by sorting each item.
9 Add Click to add fonts and forms.
For adding fonts and forms, refer to “Add/Delete Mode” on page 3-15.
10 Delete Click to delete fonts and forms.
For deleting fonts and forms, refer to “Add/Delete Mode” on page 3-15.
No. Name Description
Using Font Management Utility
3
Font Management Utility 3-17
The Add/Delete Mode main dialog box will be displayed.
Using Font Management Utility
3
Font Management Utility 3-18
2 Click Change.
The Select Device dialog box will be displayed, and registered devices
will be displayed in the List of Devices.
– If no devices are registered, then devices can be searched for, and
then registered. From the Selection Mode dropdown list, select
from Search Result. For details on device registration by search,
please refer to “Searching for and adding devices” on page 3-7.
3 Select devices from the List of Device, and click OK.
– If an Administrator password or OpenAPI password are configured
on the selected device, then a password input dialog box will be
displayed. Input the password, and click OK.
Using Font Management Utility
3
Font Management Utility 3-19
This will connect to the selected device, and the font/form list will
be displayed on the main dialog box.
4 Click Add.
The Add Font/Form dialog box will be displayed.
Using Font Management Utility
3
Font Management Utility 3-20
5 Click the Add to List button.
– If adding a font list from a font/form list setting file, click Import. For
details on font/form list settings files, please refer to “Font/form list
settings file” on page 3-35.
The Setting of Adding Font/Form dialog box appears.
6 Specify each setting, and then click the OK button.
– Type: Selects the type of the font or form to be added.
– File Name: Enters the file name of the font or form to be added. You
can also specify the file by clicking the Browse button.
– ID: Specifies an ID if the font and form to be added are PCL. Selects
Auto or Manual as the setting.
– Destination: Selects HDD or RAM as the storage destination for the
fonts and forms.
Using Font Management Utility
3
Font Management Utility 3-21
The fonts and forms are added to List of Adding Font/Form.
7 Click the Add to Device button.
– Clicking Export can save font/form setting information in the List
of Adding Font/Form as a file. For details on font/form list settings
files, please refer to “Font/form list settings file” on page 3-35.
The Add Font/Form dialog box appears.
Using Font Management Utility
3
Font Management Utility 3-22
8 Click the OK button.
The fonts and forms are added to the device.
2
Note
Font/form information added to a device is not automatically reflected on
the main dialog box. In order to confirm font/form information added to a
device, click
Refresh
on the main dialog box.
It may take some time for the information to be updated (obtained).
To delete fonts and forms
1 From the Add/Delete Mode main dialog box, click Delete.
Using Font Management Utility
3
Font Management Utility 3-23
The Delete Font/Form dialog box appears.
2 Select the fonts and forms to be deleted, and then click the Delete but-
ton.
– To delete all fonts and forms, click the Select All button. All of the
font and forms are selected.
– To clear all of the check boxes, click the Clear All button.
Using Font Management Utility
3
Font Management Utility 3-24
The Delete Font/Form dialog box appears.
3 Click the OK button.
The fonts and forms are deleted from the device.
2
Note
The PostScript forms and PostScript fonts saved to RAM cannot be de-
leted from this utility. To delete the PostScript forms and PostScript fonts
saved to RAM, turn the power of the device off. Note that when the power
of the device is turned off, all of fonts and forms in RAM will be deleted.
2
Note
Font/form information deleted from a device is not automatically reflect-
ed on the main dialog box. In order to confirm font/form information de-
leted from a device, click Refresh on the main dialog box.
It may take some time for the information to be updated (obtained).
Using Font Management Utility
3
Font Management Utility 3-25
3.5 Add Collectively Mode
Add Collectively Mode lets a user add fonts/forms to multiple devices.
This section explains the layout of the Add Collectively Mode dialog box, as
well as procedures for collective adding of fonts/forms.
Before using Add Collectively Mode, the device must be registered in the
Font Management Utility. For details on how to register a device, please refer
to “Selecting and adding devices” on page 3-3.
Main dialog box
12
5
14
34
13
12
11
10
9
7
6
8
No. Name Description
1 File You can save each list as a file (CSV file), and quit Font Management Util-
ity.
For saving a list as a file, refer to “Saving lists as files” on page 3-39.
2 Mode Switches the operation mode.
3 Device Enables registration of the device, and setting of the default device pass-
word.
Using Font Management Utility
3
Font Management Utility 3-26
4 Help Enables display of the Font Management Utility help, and confirmation of
version information.
5 Destination
list
Displays a list of devices registered in the Font Management Utility.
Fonts/forms are added for devices that are selected using the check box-
es.
The list can be displayed sorted by each item.
6 Select All Click this to select all devices in the Destination List.
7 Clear All Click this to deselect all devices in the Destination List.
8 Adding Font/
Form List
Displays a list of fonts/forms to collectively add to the device.
The list can be displayed sorted by each item.
9 Add to List Use to add fonts/forms to the list.
10 Edit Use to change font/form information.
11 Delete from
List
Use to delete selected fonts/forms from the list.
12 Import Use to import a font/form list settings file, and to collectively add font/
form information.
For details on font/form list settings files, please refer to “Font/form list
settings file” on page 3-35.
13 Export Use to save font/form information as a font/form list settings file.
For details on font/form list settings files, please refer to “Font/form list
settings file” on page 3-35.
14 Add to Devic-
es
Click this to collectively add fonts/forms displayed in the Adding Font/
Form List to the devices displayed in the Destination List.
No. Name Description
Using Font Management Utility
3
Font Management Utility 3-27
Add Collectively procedure
1 From the Mode choice dialog box, select Add Collectively, and click
OK.
The Add Collectively Mode main dialog box will be displayed.
Using Font Management Utility
3
Font Management Utility 3-28
2 In the Destination List, select the devices to which to add fonts/forms.
– If no devices are displayed in the Destination List, then devices
must first be registered. For details on how to register a device,
please refer to “Selecting and adding devices” on page 3-3.
– To select all devices, click Select All. This places a check mark in
all the check boxes.
– To remove all check marks, click Clear All.
3 Click Add to List.
– If adding a font list from a font/form list settings file, click Import.
For details on font/form list settings files, please refer to “Font/form
list settings file” on page 3-35.
The Setting of Adding Font/Form dialog box will be displayed.
4 Configure items, and click OK.
– Type: Selects the type of font/form to add.
– File Name: Inputs the file name of the font/form to add. You can
also specify the file by clicking Browse....
– ID: Specifies an ID if the font/form to add are PCL. Options are Auto
or Manual.
– Destination: Selects HDD or RAM as the storage destination for the
fonts and forms.
The fonts and forms are added to the Adding Font/Form List.
5 Click Add to Devices.
– Clicking Export can save font/form setting information in the Add-
ing Font/Form List as a file. For details on font/form list settings
files, please refer to “Font/form list settings file” on page 3-35.
Using Font Management Utility
3
Font Management Utility 3-29
An addition confirmation dialog box is displayed.
6 Click OK.
The fonts and forms are added to the device.
2
Note
Font/form information added to a device is not automatically reflected on
the main dialog box. In order to confirm font/form information added to a
device, click Change on the Add/Delete Mode main dialog box, and se-
lect the same device again.
Updating (re-acquiring) information may take some time.
Using Font Management Utility
3
Font Management Utility 3-30
3.6 Delete Collectively Mode
Select Delete Collectively Mode to delete fonts/forms from multiple devices.
This section explains the layout of the Delete Collectively Mode dialog box,
as well as procedures for collective deleting of fonts/forms.
Before using Delete Collectively Mode, the device must be registered in the
Font Management Utility. For details on how to register a device, please refer
to “Selecting and adding devices” on page 3-3.
Main dialog box
12
5
34
13
12
11
10
9
7
6
8
No. Name Description
1 File You can save each list as a file (CSV file), and quit Font Management Util-
ity.
For saving a list as a file, refer to “Saving lists as files” on page 3-39.
2 Mode Switches the operation mode.
3 Device Enables registration of the device, and setting of the default device pass-
word.
Using Font Management Utility
3
Font Management Utility 3-31
Delete Collectively procedure
1 From the Mode choice dialog box, select Delete Collectively, and
click OK.
4 Help Enables display of the Font Management Utility help, and confirmation of
version information.
5 Destination
list
Displays a list of devices registered in the Font Management Utility.
Fonts/forms are deleted for devices that are selected using the check
boxes.
The list can be displayed sorted by each item.
6 Select All Click this to select all devices in the Destination List.
7 Clear All Click this to deselect all devices in the Destination List.
8Deleting
Font/Form
List
Displays a list of fonts/forms to collectively delete from the device.
Deletes fonts/forms that are selected using the check boxes.
The list can be displayed sorted by each item.
9 Select All Click this to select all devices in the Deleting Font/Form List.
10 Clear All Click this to deselect all devices in the Deleting Font/Form List.
11 Retrieve from
Device
Use to import font/form information from registered devices, and to add
this to the list.
12 Import Use to import a font/form list settings file, and to collectively add font/
form information.
For details on font/form list settings files, please refer to “Saving lists as
files” on page 3-39.
13 Delete Click this to collectively delete fonts/forms displayed in the Deleting
Font/Form List from the devices displayed in the Destination List.
No. Name Description
Using Font Management Utility
3
Font Management Utility 3-32
The Delete Collectively Mode main dialog box will be displayed.
2 In the Destination List, select the devices from which to delete fonts/
forms.
– If no devices are displayed in the Destination List, then devices
must first be registered. For details on how to register a device,
please refer to “Selecting and adding devices” on page 3-3.
– To select all devices, click Select All. This places a check mark in
all the check boxes.
– To remove all check marks, click Clear All.
3 Click Retrieve from Device.
– If adding a font list from a font/form list settings file, click Import.
For details on font/form list settings files, please refer to “Font/form
list settings file” on page 3-35.
Using Font Management Utility
3
Font Management Utility 3-33
The Information acquisition device selection dialog box is displayed.
4 Select devices, and click OK.
Font/form information is imported from the selected device, and re-
flected in the Deleting Font/Form List.
Using Font Management Utility
3
Font Management Utility 3-34
5 In the Deleting Font/Form List, select the fonts/forms to delete using
the check boxes.
– To select all fonts/forms, click Select All. This places a check mark
in all the check boxes.
– To remove all check marks, click Clear All.
6 Click Delete.
A deletion confirmation dialog box is displayed.
7 Click OK.
The fonts and forms are deleted from the device.
2
Note
Font/form information deleted from a device is not automatically reflect-
ed on the main dialog box. In order to confirm font/form deletion from a
device, click Change on the Add/Delete Mode main dialog box, and se-
lect the same device again.
Updating (re-acquiring) information may take some time.
Using Font Management Utility
3
Font Management Utility 3-35
3.7 Font/form list settings file
Font/form list settings can be saved as a file (FMD format).
The Font/form list settings file contains basic information about fonts/forms,
as well as information regarding locations where font/form files are saved.
You can collectively import font/form information from a font/form list set-
tings file, reducing repetitive operations.
A font/form list settings file can be saved either from Add/Delete Mode or
Add Collectively Mode.
In Add/Delete Mode
1 From the Add/Delete Mode main dialog box, click Change, and select
the device.
– For details on how to select a device, please refer to “Add/Delete
Mode” on page 3-15.
2 Click Add.
The Add Font/Form dialog box will be displayed.
3 In the List of Adding Font/Form, add fonts/forms.
– For details on how to add fonts/forms to the list, please refer to
“Add/Delete Mode” on page 3-15.
Using Font Management Utility
3
Font Management Utility 3-36
4 Click Export.
The Export Font/Form List Setting File dialog box will be displayed.
5 Specify the location to save and file name, and click Save.
The file is saved in the specified location.
Using Font Management Utility
3
Font Management Utility 3-37
In Add Collectively Mode
1 In the Add Collectively Mode main dialog box, add fonts/forms to the
Adding Font/Form List.
– For details on how to add fonts/forms to the list, please refer to
“Add Collectively procedure” on page 3-27.
2 Click Export.
The Export Font/Form List Setting File dialog box will be displayed.
Using Font Management Utility
3
Font Management Utility 3-38
3 Specify the location to save and file name, and click Save.
The file is saved in the specified location.
Using Font Management Utility
3
Font Management Utility 3-39
3.8 Saving lists as files
You can save the font and form list as a file (CSV file).
Lists can be saved as files from Add/Delete Mode.
To save a list
1 From the Add/Delete Mode main dialog box, click Change, and select
the device.
– For details on how to select a device, please refer to “In Add/Delete
Mode” on page 3-35.
2 Select Save List from the File menu on the main dialog box, and then
click the list you want to save.
The dialog box for saving the list appears.
3 Specify the save location and file name, and then click the Save button.
The file is saved in the specified location.
2
Note
The saved CSV file can be viewed and printed by opening it with a
spreadsheet program such as Microsoft Excel.
Using Font Management Utility
3
Font Management Utility 3-40
3.9 Other settings
3.9.1 Default Password settings for registered devices.
Devices that do not have an Administrator password set may be registered
in Font Management Utility. In these cases, use the default password that
has been configured in advance to connect to the device.
This section explains setting the default password.
Settings procedure
1 From the Mode choice dialog box, select an operation mode, and click
OK.
Using Font Management Utility
3
Font Management Utility 3-41
Main dialog boxes for each of the selected operation modes will be dis-
played.
2 From the Device menu, select Default Device Password.
The Default password setting of a registration device dialog box is
displayed.
Using Font Management Utility
3
Font Management Utility 3-42
3 Select When a password is not set by a registration device, I am
connected to a device with the following passwords.
Each of these settings items can be configured.
4 Configure items.
– Admin password: Input the default password.
– Save this admin password: Saves the input default password.
– To save the OpenAPI Username and Password, click Detailed Set-
tings. The OpenAPI Username and Password can be input.
5 Click OK.
This closes the Default password setting of a registration device di-
alog box.
2006.12
2 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oce User Manual Copy Protection Utility bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oce User Manual Copy Protection Utility in de taal/talen: Engels als bijlage per email.

De handleiding is 0,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info