Handleiding Oce OP31C Fax System (pagina 24 van 200) (Engels)

46798

Verklein

Vergroot

Pagina terug

1/200

Pagina verder

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)

1-12

What is the Administrator Number Used

For?

In order to manage each individual's or each department's use of

this fax in the Fax Operation mode – and enhance security during

Encrypted Communication as well – it is necessary to enter the

registered administrator number in those cases noted in (1) and (2)

below.

As you can only register one administrator number, it is

recommended that the person-in-charge of managing use of this fax

be the one to register that number.

* The factory default administrator number is “3100”.

(1) You must enter the administrator number when...

• turning Restricted Access ON and OFF.

• registering ID-codes.

• registering Encryption Keys.

• printing out the Encryption Key List.

(2) If Restricted Access is turned ON, you must enter the

administrator number when...

• printing out any report or list other than the Activity

Report.

• performing any setting or registration procedure.

NOTE

It is suggested that you make some sort of note of the new

administrator number after changing it. If, for any

reason, you lose reference to the number, you will not be

able to access to the various setting, registration,

modification and deletion procedures of this fax.

When You Press the Reset Key...

When you want to cancel a procedure part way through, simply

press the Reset key. The touch panel will automatically return to

the initial mode for fax operation.

* If, however, documents have already been set when you press the

Reset key, the displayed size of those documents will remain in

the message display.

* Depending on the status of the operation, there are occasions

when pressing the Reset key may have no effect.

Automatically Clearing the Current

Settings (Auto Clear function)

The Auto Clear function will clear all entered settings and the

touch panel will return to the initial mode settings after any type of

transmission or print out, or if you do not press any keys within 90

seconds during any procedure.

* If, however, documents are set when the Auto Clear function

engages, the displayed size of those documents will remain in the

message display.

Using a 3-digit Document Number to Manage

Fax Communications (Document Number)

The fax uses a 3-digit document number in order to manage each

fax communication. This document number is assigned during each

procedure and in the order that each communication that uses the

timer, as well as each transmission or reception, is accomplished.

The actual timing of the determination of each document number

will differ depending upon the operation being carried out.

In addition to appearing in the message display, this document

number can be verified by checking the Transaction Result display,

the Delayed Communication Report that is printed out for each

communication that uses the timer or by printing out a

Confirmation Report. (Refer to “Checking the Result of

Transmissions” on page 6-1, “Printing Out a Confirmation Report”

on page 6-4, and “Turning Print Out of Each Report ON/OFF

(Print Report setting)” on page 7-1.)

(inch)

(metric)

Automatically Engaging the Energy

Saving Mode (Auto Shut-Off function)

Anytime there is no operation of or activity with this fax (no keys

are pressed, no documents are set, nothing is printed out, etc.) for a

designated period of time, the Auto Shut-Off function will engage

for energy saving purposes and the fixing section heater and fan

inside the machine will shut down.

The amount of time most copy or fax machines spend waiting for

some operation to begin is generally greater than the time actually

spent on copying or fax communication. Thus, the energy consumed

during that time is a great percentage of the overall energy used by

the machine. Shutting down the fixing section heater and fan

enables energy and cost reductions by minimizing unnecessary

energy consumption while the machine is in this waiting state.

* It is possible to change the amount of time that will elapse before

the Auto Shut-Off function is to engage (factory default: 60

minutes). It is recommended that this be set to a longer period of

time if the machine is used frequently during the day, and to a

shorter time if there are normally long periods between use.

(Refer the Operation Guide for your copier.)

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Oce OP31C Fax System Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info