35
EN
The control panel can be cleaned by using a lightly dampened cloth. After cleaning, make sure to dry it thoroughly. For
the exterior, use a good appliance polish wax. Never use sharp objects, scouring pads or harsh cleaners on any part of
the dishwasher.
CLEANING THE DOOR
CARING FOR THE DISHWASHER
To clean the edge around the door, you should use only a
soft warm, damp cloth. To avoid penetration of water into
the door lock and electrical components, do not use a
spray cleaner of any kind.
Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical components.•
Abrasive agents or some paper towels should not be used because of the risk of scratching or leaving spots on the •
stainless steel surface.
WARNING:
Please take frost protection measures on the dishwasher in winter. Every time after washing cycles, please operate as
follows:
Cut off the electrical power to the dishwasher.1.
Turn off the water supply and disconnect the water inlet pipe from the water valve.2.
Drain the water from the inlet pipe and water valve. (Use a pan to catch the water)3.
Reconnect the water inlet pipe to the water valve.4.
Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.5.
If your dishwasher cannot work because of the ice, please contact professional service persons.
NOTE:
PROTECT AGAINST FREEZING
HOW TO KEEP YOUR DISHWASHER IN SHAPE
AFTER EVERY WASH
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
REMOVE THE PLUG
Before cleaning or performing maintenance, always
remove the plug from the socket.
NO SOLVENTS OR ABRASIVE CLEANING
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products. Only
use a cloth with warm soapy water. To remove spots or
stains from the surface of the interior, use a cloth
dampened with water and a little vinegar, or a cleaning
pro duct mad e specifically for dishwashers.
WHEN NOT IN USE FOR A LONGTIME
It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door seals
to last longer and prevent odours from forming within the
appliance.
MOVING THE APPLIANCE
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
SEALS
One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
