783003
27
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
27
Fig. 10 Setting the timer
The timer switches the product on or into standby when a user-dened time has elapsed.
When switching on, the last mode and setting will be used. The set durations will be counted
down immediately after the input without correlation to the contrary time setting.
1. Press the timer program button TIMER at the product or the specic TIMER ON/OFF
button at the remote control to enter timer setting for either the auto-on or auto-standby
timer. The respective indicator for each setting will light up.
2. Press the / buttons or the specic TIMER ON/OFF button at the remote control as
often as necessary to set a time from 0.5 to 24 hours.
3. The setting will be saved after 5 seconds without input.
Examples:
• To have the product switched o after 1 hour and on again after another 1 ½ hours, set the
auto-o time to 1.0 h and the auto-on time to 2.5 h during operation.
• To have the product switched on after 8 hours and o after another 8 hours, set the auto-
on time to 8.0 h and the auto-o time to 16.0 h while in standby.
Notes:
• The adjusting increments are 0.5 hours up to 10 hours, then 1 hour up to 24 hours.
• The respective indicator will be lit, when a time is set.
• Switching the product on or into standby manually will cancel the timer setting.
• The timer settings will be lost once the respective actions were conducted and the time
needs to be set again.
• The timer setting will be lost in case an error occurs (see protection and error codes).
Preprogramming a function
By pushing the SHORTCUT button any function and temperature can be saved and recalled.
1. Choose your desired function e.g. using the MODE, TEMP / or / and FAN buttons, etc.
2. Press and hold SHORTCUT button until the display ashes one time to save the setting.
3. The preset setting can be recalled anytime and from any mode by simply pushing the SHORTCUT
button.
Fig. 11 WATER DRAINAGE
Water is only collected during automatic AUTO, cooling and dehumidifying mode .
During dehumidifying mode water is drained immediately through the upper drain outlet
and the drainage hose must be continuously connected. The water is drained through the
hose into a suitable container or nearby drain.
WARNING – Danger of ooding! Do not leave the product unattended when draining to an
external container! Empty the container frequently to avoid spilling over and water damage.
During automatic AUTO and cooling mode water is collected in an internal tank, which
must be drained when full. In this case the product will emit an audible signal, while the
display on the control panel is showing the protection code P1. The cooling process will stop
until the water is drained and the product restarted, while the fan remains running.
1. Disconnect the product from the power supply.
2. Place the product with the lower drain outlet above a suitable container or a drain.
3. Remove the cover of the lower drain outlet.
4. Attach the cover of the outlet again, when all water is drained.
5. Connect the plug to a suitable socket.
6. The product is ready to be switched on.
IM_OAC2221_161201_V04_HR.indb 27 1/12/16 4:31 PM
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw OK OAC 2221 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van OK OAC 2221 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 4.52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info