618180
9
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
9
Display Controls
The Display of the TTXUSB was developed to instantly provide usable feedback regardless of the turntable
orientation. Understanding its functions may improve your skill level.
1. Platter Direction Sensors: Whether the turntable platter is turning or stopped, these segments
indicate the direction of rotation. They move in pairs on opposite sides of the display.
NOTE: If the platter is removed while the turntable is powered on, the entire ring of
segments will flash indicating that the drive magnets have been pulled apart and the
motor has entered PROTECTION MODE. It is recommended that the turntable be powered
off after it enters PROTECTION MODE before replacing the platter.
2. Multi-Function Segment Indicators: Depending on the display mode, these Indicators may
provide pitch, BPM or motor settings. See the independent functions of the PITCH, BPM and MOTOR
CONTROLS for additional information.
3. BPM Button: Pressing this button will toggle the center section of the display between the current
pitch setting and an estimated beats per minute (BPM) reading. If this button is pressed and held for
2 seconds, the BPM counter will recalculate the BPM estimation. If the display is indicating a steady
"---" this means that the TTXUSB is calculating the BPM range OR it is unable to distinguish an
estimate. If the BPM estimation is a flashing "---" then this indicates that there is no audio being
processed.
4. Pitch versus BPM indicators: The
word PITCH and the PERCENTAGE
symbol are both active while the
display indicates the pitch setting. The
BPM indicator is only active when the
display is set to provide BPM
estimations.
5. Pitch Range Button: This button
toggles the pitch range between 10,
20 and 50% when pressed in
succession. If this button is pressed
and held for 2 seconds, the pitch
range will be set to 8% until the
button is pressed again. If this button
is pressed and held together with the
BPM Button (3), then the contrast of
the Display will be reduced until the
buttons are released.
6. Pitch Range Indicators: Depending
on the pitch range (8, 10, 20, 50%)
these indicators will be active. When
the pitch range is set to 8%, none of
these indicators are active.
7. RPM settings: The 33, 45 or 78
segments will be active for the
respective motor RPM mode.
8. Key Lock Indicator: This symbol
indicates that the onboard digital signal processors are correcting the KEY of the playback source.
NOTE: The KEY LOCK function can only be used while the output is set to LINE level.
9. Quartz Lock Indication: If the QUARTZ LOCK function (General Controls) is engaged, this
segment becomes active and the display will flash "- Q -" if the PITCH FADER is adjusted until the
QUARTZ LOCK function is deactivated.
10. Start Time Indicator: If this indicator is active while the motor is starting, it means that the
startup time has been adjusted using the Start Time Adjuster (General Controls)
11. Brake Time Indicator: If this indicator is active while the motor is stopping, it means that the stop
time has been adjusted using the Braking Time Adjuster (General Controls)
12. Contrast: Press both (3) and (5) simultaneously to cycle through contrast levels on the display.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Numark TTXUSB turntable bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Numark TTXUSB turntable in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 2,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info