618137
8
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Editor
User Guide
Guía del usuario
Guide d'utilisation
Guida per l'uso
Benutzerhandbuch
2
Introduction
Orbit Editor is a free software application that lets you change the MIDI messages sent from
your Numark Orbit to your music software. This editor lets you set each pad, virtual knob, and
button (across four banks) to send a unique command to your software, giving you deep,
dynamic, and powerful control over your performance.
Please read this manual to get a better understanding of the Orbit Editor.
System Requirements and Product Support
For complete system requirements, compatibility information, and product registration, visit the
Numark website: numark.com.
For technical support, please contact us through the Support page of our website:
numark.com/support.
Installation
Windows
®
1. Double-click the .exe file you unzipped to open the installer.
2. Follow the on-screen instructions to install the software.
Mac
®
OS X
®
1. Double-click the .pkg file you unzipped to open the installer.
2. Follow the on-screen instructions to install the software.
3
Overview
Orbit Editor's graphical interface looks just like your Numark Orbit but with some extra
information about the MIDI messages it sends. All of this information is considered a "mapping,"
which determines how your Orbit will command your software. The three panels below it—
Manage Mappings, Preferences, and Edit Mappings—let you adjust, save, load, reset, etc.
your mappings.
Graphical
Interface
Panels
4
Graphical Interface
Orbit's has three types of hardware controls whose MIDI messages you can edit. This section
explains how to adjust the MIDI message sent by each type of hardware control.
Important: Remember that there are four banks of controls. When editing your mappings,
make sure you are on the bank you want. Click the desired Pad Bank button in the graphical
interface to select the bank. The bank number will display in the Edit Mappings panel, and the
values on the graphical interface will reflect those of the current bank only.
Tip: If you want to set a MIDI note number, MIDI CC number, or MIDI channel number to all
pads, all virtual knobs, or both accelerometers, see the Apply section below. This feature lets
you "copy" a single value or set ascending values across all similar controls.
5
Pads
To adjust the pads' MIDI messages:
1. Select a pad by clicking it on the graphical interface. Its values will appear in the Edit
Mappings panel below.
2. Set the pad's MIDI note number by clicking the Note field and dragging up or down.
Alternatively, you can manually enter a value by typing it in.
3. Set the pad's MIDI channel by clicking the Channel field and select the channel number.
4. Set the pad's mode by clicking the Mode drop-down menu and selecting the mode:
Momentary: The pad will send its MIDI message for as long as you press and hold it
down. It will stop when you release it.
Toggle: The pad will send its MIDI message continuously after you press it once. It
will stop when you press it again.
5. Set the pad's light color by clicking one from the palette on the right.
6. Repeat Steps 1-5, if desired.
8
Edit Mappings
The earlier sections of this manual—Pads, Virtual Knobs (K1 – K4), and Accelerometers
describe how to use the Edit Mappings panel to set the various MIDI messages for each
control. This panel has an additional feature, though, explained below.
Apply
The Apply feature lets you easily do either of the following:
Copy a MIDI note number, MIDI CC number, or MIDI channel number to a group of
sequential controls of the same type (and on the same bank).
Examples:
o You could set all 16 pads' to a single MIDI channel.
o You could set Pads 8-16 to a single MIDI note number.
o You could set all virtual knobs to a single MIDI CC number.
Assign MIDI note numbers, MIDI CC numbers, or MIDI channel numbers in ascending
order across a group of sequential controls of the same type (and on the same bank).
Examples:
o You could set Pad 1 to send MIDI Note 48, Pad 2 to send MIDI Note 49, Pad 3 to
send MIDI Note 50, etc.
o You could set Virtual Knobs K1, K2, K3, and K4 to send MIDI CCs 10, 11, 12, and
13, respectively.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Numark Orbit Editor bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Numark Orbit Editor in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info