618162
6
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
6
TOP & FRONT PANEL FEATURES
1. POWER LED – Illuminates
when the mixer is on.
2. MIC GAIN – Adjusts the audio
level of the microphone signal.
3. MIC BASS – Adjusts the low
(bass) frequencies of the
microphone channel.
4. MIC TREBLE – Adjusts the
high (treble) frequencies of the
microphone channel.
Tip: If you experience
feedback when using a
microphone at loud levels, try
turning down the high (treble)
frequencies.
5. CHANNEL GAIN – Adjusts
the channel audio gain level,
pre-fader and pre-EQ.
6. CHANNEL TREBLE – Adjusts
the high (treble) frequencies of
the corresponding channel.
7. CHANNEL MID – Adjusts the
mid-range frequencies of the
corresponding channel.
8. CHANNEL BASS – Adjusts
the low (bass) frequencies of
the corresponding channel.
9. INPUT SELECTOR – Selects
the input source to be routed
to the corresponding channel. Input jacks are located on the rear panel.
10. CHANNEL FADER – Adjusts the audio level sent to the Program mix.
11. CUE GAIN – Adjusts the audio level of the Cue channel in the headphones.
12. HEADPHONES OUTPUT – Connect your ¼” headphones to this output for cueing and mix monitoring.
Headphone output controls are located on the top panel.
13. CUE MODE SELECTOR – Selects the audio to be routed to the headphones. Switch it to “MASTER”
to hear the Program mix. Switch it to “CH1 CH2” to hear Channels 1 and 2 (see #14 above).
14. CUE SLIDER – When CUE MODE SELECTOR is set on “CH1 - CH2” (see #13), the cue slider blends
between Channel 1 & Channel 2 audio in the headphones. Move this slider to the left to hear Channel
1, or to the right to hear Channel 2.
15. CROSSFADER – Blends audio between Channels 1 and 2. Sliding the crossfader to the left plays
Channel 1. Sliding it to the right plays Channel 2.
Note: The crossfader is user-replaceable if it should ever wear out. Simply remove the facepanel, then
remove the screws holding it in position. Replace the fader with a quality authorized replacement from
your local Numark retailer only.
16. CROSSFADER (CF) MODE – Press this button to reverse crossfader assignment of Channels 1 and 2.
17. CROSSFADER (CF) SLOPE – Adjusts the slope of the crossfader curve. Flip switch to the left for a
smooth fade (mixing) or to the right for a sharp cut (scratching).
18. LEVEL INDICATORS – Monitors the audio level of the Program mix (L&R) and the pre-fader audio
levels of Channels 1 and 2 (CUE).
19. MASTER FADER – Adjusts the output volume of the Program mix.
4
3
2
5
6
7
8
9
10
5
6
7
8
9
10
15
14
11
13
1
12
16
17
18
19
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Numark M2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Numark M2 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 5,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info