803234
1
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
23
Contents
1. Description of device. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1.1 Proper use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1.2 Contents of package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2. Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3. Components of the baby unit . . . . . . . . . . . . . . . . . . . . 26
3.1 Overview of baby unit indicators . . . . . . . . . . . . . . . . . . . . 26
4. Starting the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.1 Connecting the baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.2 Connecting baby unit and parent unit . . . . . . . . . . . . . . . . 28
4.3 Patrol-Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.4 Eco-Mode and Full-Eco-Control. . . . . . . . . . . . . . . . . . . . . 32
5. Operating the baby unit . . . . . . . . . . . . . . . . . . . . . . . . . 34
5.1 Switching the baby unit on and off . . . . . . . . . . . . . . . . . . . 34
5.2 Indicator LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.3 Setting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.4 Playing the lullabies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.5 Nightlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.6 Measuring the room temperature . . . . . . . . . . . . . . . . . . . . 36
6. Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.1 FHSS Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
8. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
8.1 Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
8.2 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
9. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
9.1 Service Centres NUK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
9.2 Service Centres Babyphone . . . . . . . . . . . . . . . . . . . . . . . . 41
9.3 Supplier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
10. Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . 41
24
1. Description of device
1.1 Proper use
This baby unit can used as an
additional camera for the baby
monitor Eco Control Video Display
550VD (Article no. 10.256.441).
There can be four cameras added to
the baby monitor Eco Control Video
Display 550VD in total.
Further Information can be found in
the operating instructions of the
Babyphone.
1.2 Contents of package
1 baby unit (for the nursery)
1 mains adapter for the baby unit
Screws for wall-mounting the
baby unit
1 User Manual
2. Safety information
Please read these operating
instructions carefully before using
the device. These instructions
form part of the device and must
be kept to hand at all times.
Please pay attention to all safety
instructions that are listed in the
operating instructions for the baby
monitor Eco Control Video Display
550VD.
In case you do not have the
instruction manual at hand you
can dowload it on our website
www.nuk.de or on our service
website www.nuk-service.com
Special notes for this baby unit
(camera)
Warning! To protect you
from electric shock:
27
4. Starting the device
Note: Always connect the cables
before inserting the mains adapter
into the socket.
4.1 Connecting the baby
unit
The baby unit automatically switches
itself on when it receives a fresh
power signal over the mains. This
prevents the baby unit from staying
switched off when power is restored
after a short power failure.
Note: Don’t install the baby unit 1
until the battery of the parent unit 17
is fully charged.
1. Put the baby unit 1 somewhere in
the nursery where your baby will
not be able to reach it.
An optimal distance between baby
and the baby unit is from 1 to 2 m.
Make sure the camera is set up to
keep your baby in the picture at all
times, even if the zoom function
on the parent unit is active.
Note: Since the temperature
sensor is inside the baby unit it is
important that you do not cover it
or place it near any heat source.
Direct sunlight may also affect the
reading.
2. Insert the mains adapter plug into
the socket 16 of the baby unit 1.
3. Insert the plug into a power
socket that matches the rating
given in the technical data (see
"7. Technical data" on page 37).
Power-LED 8green Baby unit is switched on
off Baby unit is switched off
Baby unit
Light Display Meaning
28
This automatically switches the
baby unit on.
Note: You can also wall mount the
baby unit in a suitable position with
the enclosed screws. Make sure you
position the screws 45 mm apart for
this.
4.2 Connecting baby unit
and parent unit
1. First make certain the parent unit
is near enough to the baby unit.
Move to a location that you can
be confident is within range of the
baby unit so that the parent unit
can receive the connection link
signal and there are no
communication problems.
2. To switch the baby unit 1 on,
press and hold the On/Off
button 10 until the power LED 8
lights up.
3. To switch the parent unit 17 on,
press and hold the On/Off button
for a few seconds:
You will hear a beep, the power
LED 21 will light up, and the
"Hello" screen will appear.
Please performe the following steps
on the parent unit:
4. Press the button 26.
The menu bar with the main menu
will appear at the bottom of the
screen.
5. Use the 24 or 27
button to select the Camera
menu.
The selected symbol will be
shown in red.
6. Press the button 26 to view
the submenu.
7. Use the 25 or 28
button to select the Add
camera submenu.
8. Press the button 26 to view the
next submenu.
An overview appears showing
four camera symbols. The
29
available camera numbers for
your new camera are shown in
black.
Camera numbers already in use
are shown in green.
9. Use the 25 or 28 button to
move the star in front of the
available camera number you
wish to use for the new camera
(black symbol).
10.Press the button 26to confirm
your selection.
You will be asked to
confirm your selection
again.
11.Use the 24 or
27 button to select
"YES" and press the button
26 to confirm.
The screen of the parent
unit will show that the
device is ready to set up
the connection and is searching
for the connection link signal.
12.Insert a bent paper clip or similar
into the button recess and press
the recessed button 9 on the baby
unit to activate the connection link
signal.
The baby unit will then transmit
the connection link signal for the
parent unit to find.
As soon as the connection
with the new camera has
been successfully set up,
you will hear a beep and the
appropriate symbol will appear on
the screen.
The menu on the parent unit will
be closed and video transmission
from the new baby unit will be
shown. The new baby unit is
displayed in the status bar with a
camera symbol and number.
4.3 Patrol-Mode
This function is particularly useful if
you are monitoring more than one
child or more than one room, or if
you wish to monitor the same room
31
7. Press the button 26 to confirm
your selection.
The menu on the parent unit will
be closed and video transmission
from the connected cameras/baby
units will be shown in sequence.
The number of the active camera/
baby unit is displayed in the
status bar. in addition, the patrol
mode symbol will be shown.
In patrol mode, the VOX level is
automatically set to 5, i.e.,
continuous transmission. This
means that Eco-Mode is not
available in patrol mode (see
"6.8Setting the VOX sensitivity
level" in the manual of the baby
monitor Eco Control Video Display
550VD).
Note: After 15 seconds without any
input from you, the menu will be
closed with the settings unchanged
and the parent unit will return directly
to monitoring mode.
Deactivating patrol mode
To deactivate patrol mode, follow
steps 1 to 5 described above.
6. When you come to step 6, instead
of selecting PM, select a
particular camera/baby unit you
wish to use for continuous
monitoring.
7. Press the button 26 to confirm
your selection.
The menu on the parent unit will
be closed and video transmission
from the selected camera/baby
unit will be shown. The number of
the active camera/baby unit is
displayed in the status bar and the
PM symbol disappears.
Connection problems in patrol
mode
If there is a connection
problem with one of the baby
units while the parent unit is
in patrol mode, you will hear a beep
and a corresponding symbol will
appear on the screen.
32
The units will automatically try
to reconnect, and will
continue to attempt this until
the connection is established
successfully once more. Once the
connection has been reestablished
successfully, the device will return
directly to monitoring mode.
If the parent unit continues to
fail to find a connection signal
from the baby unit, the
corresponding red warning symbol
appears. The connection setup is
attempted for one minute, before
patrol mode switches to the next
camera/baby unit.
If the connection problem recurs the
next time the baby unit is accessed
in the patrol mode loop, check the
connection to this baby unit. This
baby unit might need to be re-
registered (see "4.2 Connecting baby
unit and parent unit" on page 28).
4.4 Eco-Mode and
Full-Eco-Control
This baby monitor has an Eco-Mode
function that not only saves power
but also minimises the high-
frequency radio waves in the nursery.
In this mode, there is only limited
transmission between the baby unit
and the parent unit, although the
Full-Eco-Control function ensures
that both units remain connected the
whole time. If the connection is
interrupted in Eco-Mode, this is
immediately indicated on the parent
unit. The device automatically
deactivates Eco-Mode and transmits
sound and video again as soon as
your baby makes a sound that
exceeds your set sound limit (VOX
levels 1 - 4).
Activating Eco-Mode
Eco-Mode can only be activated at
VOX levels 1, 2, 3, and 4 (see
"6.8Setting the VOX sensitivity level"
in the manual of the baby monitor
Eco Control Video Display 550VD).
36
until switched off by you on the
parent unit or the baby unit.
5.5 Nightlight
The baby unit’s soft nightlight can
help your baby to get its bearings in
the dark room, which it may find
soothing. The nightlight remains on
until it is switched off by you or the
timer function on the parent unit.
1. You can switch the nightlight on or
off on the baby unit by briefly
pressing the button Nightlight
on/off 13.
Or
2. You can switch the nightlight on
and off on the parent unit.
5.6 Measuring the room
temperature
The baby unit has an integrated
temperature sensor which is not
visible from the outside. This sensor
measures the temperature in around
the baby unit, which is displayed and
continually updated on the parent
monitor.
Notes: To avoid affecting the
temperature measurement:
do not cover the baby unit
do not place the baby unit near
a heater or cold surfaces
do not place the baby unit in
direct sunlight.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nuk Cam Eco Control Video Display - 10256464 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nuk Cam Eco Control Video Display - 10256464 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Nuk Cam Eco Control Video Display - 10256464

Nuk Cam Eco Control Video Display - 10256464 Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info