741774
67
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
– 67 –
6.4 Increase and decrease the power level
The extraction tower can be set to 13 power levels, indicated
via the 4 LEDs with increasing intensity per level.
Activate a higher power level if strong odours or vapour are
present. The extraction tower then works at a higher flow rate.
Adjusting the power level:
Increase the power
Brighter
LED(s)
Press
+
Decrease the power
LED(s)
dim
Pr
ess
6.5 Low position of extractor
You can use the button to choose a fixed power (250 m3/h),
while keeping the tower at a low level.
This function could be used for cooking an egg, for example.
Low position of extractor
Switch on
Press and hold
for 2 seconds.
Switch off
Press
Note: You can switch from low to high suction mode by pressing
the
+
button.
6.6 Auto-stop
In order to ensure the extraction does not keep running, the
motor switches off and the extraction tower closes automatically
after 3 hours (if the controller has not been changed during
these 3 hours).
6.7 Concentration of the ventilation
When cooking only on one side of the cooking plate, you can
concentrate the extraction of fumes on this side. Using the
switch you can concentrate the extraction of fumes on the left
or on the right side. This even further increases the efficiency
of the unit.
7 CLEANING INDICATIONS
7.1 Cleaning indication for grease filter

Indication: LED next tot lights
After 20 cooking hours, the LED next to the
symbol will
light up.

Follow the cleaning instructions as described in the
chapter, Cleaning.
After having cleaned and replaced the grease filters, reset the
cleaning indication.
Reset: press the
control key for 3 seconds.
7.2 Cleaning indication for recirculation filter
(only with recirculation)

Indication: LED next to
lights
After a fixed time, the LED lights up next to the symbol
will light up. This indication indicates that the recirculation filter
needs to be regenerated.

Follow the cleaning instructions described in the
recirculation box / filter manual.
After the regeneration and after having replaced the recirculation
filter, reset the cleaning indication.
Reset: press the
control key for 3 seconds.
7.3 I/O module connection
(1801 One Power & 1811 One Pro from v13)
The device can be optional equipped with the Input/Output
module n° 990034.
When the input of the module is used in “closed” input situation
the extraction tower will move to the desired height only the
extraction will not start.
The leds next to the Cleaning indication
and will blink.
The extraction only starts when the input situation is “open”.
The input can be used for example in combination with a
sinwow switch in duct out mode.
When the output of the module is used the relay will close when
the extraction is active.
The output remains closed also 5 minutes after closing the
extraction tower.
67

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Novy 1811 One Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Novy 1811 One Pro in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 19,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Novy 1811 One Pro

Novy 1811 One Pro Installatiehandleiding - Nederlands, Deutsch, English, Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info