Setting the clock (the clock is not set ex factory)
«Boil wash 95°C» + «Fast forward»
The hours can be set using the «Coloureds 60°C» button
and the minutes using the «Boil wash 95°C» button.
Language (ex factory GERMAN)
«Express» + «Fast forward» ÷ «Fast forward»
The basic language is changed and is retained even after
switching the machine off or putting it in sleep mode.
Extended basic settings
«Coloureds 40°C» + «Coloureds 60°C» +
«Fast forward»
X By pressing these three buttons at the same time, the
display shows the extended basic settings.
X Repeatedly pressing the «Coloureds 40°C» button
shows the possible settings.
X Pressing the «Coloureds 60°C» button allows the set-
tings to be changed
X Pressing the «Fast forward» button interrupts the di-
splay of the settings.
Skincare function (ex factory OFF)
Select «Extended basic settings»!
If the skincare function is switched on, two extra rinses
are added to each wash programme. These additional
rinses can prevent skin allergies.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing or
deletion of a programme by small children.
Operating the machine with the child lock switched on:
«Start» + «Fast forward»
Halten Sie die Starttaste gedrückt und betätigen Sie die
Schnellgangtaste.
Rinse stop (ex factory INDIVIDUAL)
Select «Extended basic settings»!
If this function is switched on, all easy care or fine wash
programmes automatically add a rinse stop.
Dirt sensing (ex factory WASH AND RINSE)
Select «Extended basic settings»!
Dirt sensing while washing:
When dirt sensing while washing is switched on, the
wash time is automatically extended if there is heavy
soiling. Dirt sensing works with boil, coloured and easy
care washes.
If liquid detergent is used, dirt sensing while washing is
switched off.
Dirt sensing while rinsing:
If dirt sensing while rinsing is switched on, up to two
extra rinses will be added if there is heavy soiling in the
rinse water.
Memory function (ex factory OFF)
Select «Extended basic settings»!
If the memory function is switched on, the selected tem-
perature and spin additional functions are saved for each
programme. If the same programme is selected again,
the stored values are automatically used. The values can
then be altered.
Soap wash programme (ex factory OFF)
Select «Extended basic settings»!
An additional rinse is used when this function is
switched on.
Soaking programme (ex factory OFF)
Select «Extended basic settings»!
When this programme is switched off: normal time
preselection up to a maximum of 20 hours.
If the soaking programme is switched on:
X Select additional functions after choosing your
programme.
z Set the desired soaking time by pressing the «Soak»
function one or more times.
X The soaking time begins whe the start button is
pressed.
Note:
X Add soaking detergent in section I of the detergent
drawer and your usual detergent in section II.
X The soaking programme must be reprogrammed for
each wash.
X Soaking can be interrupted and the wash programme
started by pressing the fast forward button.
X In the event of a power cut, the current soaking time
is stored. The duration of the power cut is not taken into
account.
X Once a wash programme is started, the soaking time
cannot be altered.
Cool down function (ex factory OFF)
Select «Extended basic settings»!
(Detergent solution cooling)
When the detergent solution cooling function is switched
on, boiling water is cooled with cold water at the end of
the washing process.
This helps to prevent damage to older drains.
This cooling always takes place in easy care and super fi-
nish programmes, irrespective of this setting. This helps to
prevent creases.
Tumbling at end of programme (ex factory ON)
Select «Extended basic settings»!
When this function is selected, the laundry is tumbled for
5 minutes at the end of the programme.
Wash time reduction (ex factory ON)
Select «Extended basic settings»!
When this function is switched off, the boil, coloured and
easy care programmes are longer.
18
