Set the thermostat to suit the ingredients. •
Experiment with the required cooking time
and the required temperature to achieve
the best results.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible •
damage.
Clean the appliance after each use:•
- Remove any residues with a paper towel.
- Clean the grill rack with a damp cloth.
Thoroughly dry the grill rack.
- Clean the heating element with a damp
cloth. Thoroughly dry the heating element.
- Clean the appliance with a damp cloth.
Thoroughly dry the appliance.
Store the appliance in a dry place, out of •
the reach of children.
U.K. Wiring instructions
The wires in the mains lead are coloured in
accordance with the following code:
BLUE NEUTRAL
BROWN LIVE
GREEN/YELLOW EARTH
As the colours of the wire in the mains lead of
this appliance may not correspond with the
colour markings identifying the terminals on
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter L or coloured red.
Use
Switching on and off (fig. A)
The appliance is equipped with a thermostat
that keeps the grill rack at the required
temperature.
To switch on the appliance, insert the •
mains plug into the wall socket.
Turn the thermostat dial (1) to set the •
required temperature. The temperature
indicator (2) remains on while the
thermostat heats the heating element (4).
The temperature indicator (2) goes off
when the heating element (4) has reached
the required temperature.
While the appliance is switched on, the •
temperature indicator (2) will illuminate
and extinguish as the thermostat switches
the heating element (4) on and off to
maintain the required temperature.
To switch off the appliance, remove the •
mains plug from the wall socket.
Setting the temperature (fig. A)
Turn the thermostat dial (1) clockwise to •
increase the temperature of the grill rack (3).
Turn the thermostat dial (1) counterclockwise •
to decrease the temperature of the grill rack
(3).
Hints for use
Prepare the ingredients.•
Clean the grill rack with a damp cloth.•
Place the appliance on a stable and flat •
surface.
Fill the water reservoir with water up to the •
maximum mark on the water level indicator
(fig. C). Do not exceed the maximum mark
when you fill the water reservoir.
Insert the mains plug into the wall socket.•
Turn the thermostat dial to set the required •
temperature.
Wait for 10 minutes until the temperature •
indicator goes off. The grill rack has reached
the required temperature.
Note: Small pieces will grill or fry better and •
more quickly than large pieces.
