497637
3
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
Nokia Mediamaster
Free-to-View
Owner’s Manual
Digital terrestrial Free-to-View is a non-subscription service through an
existing TV and aerial.
Total Channel availability is subject to coverage.
*You may be reguired to upgrade your television aerial to enable full
service reception.
Important Information
Wiring the plug (UK and Eire only)
The mains lead on this product is already fitted with a non-rewireable (moulded)
plug incorporating a fuse, the value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362
fuse must be used of the same rating.
If the fuse cover is detachable always refit the cover after replacing the fuse.
NEVER use the plug with the fuse cover omitted.
If the fitted plug is not suitable for your socket outlets it should be cut off, after
having first removed the fuse, and an appropriate plug fitted in its place. If this
new plug contains a fuse its value should be the same as that removed from the
non-rewireable plug.
The severed plug must be destroyed immediately to avoid possible shock hazard.
If you need to replace the mains plug then follow the instruction given below:
The wires in the mains lead are coloured in accordance with the following code:
BLUE - Neutral (N); BROWN - Live (L).
As these colours may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the
letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the
letter L or coloured BROWN or RED.
On no account should either of these wires be connected to the terminal marked
E or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is clamped over
the sheath of the lead; not simply over the two wires.
If in doubt, consult a qualified electrician.
Nokia Home Communications operates a policy of continuous development.
Therefore we reserve the right to make changes and improvements to any
of the products described in this manual without any prior notice.
Nokia is a registered trademark of Nokia Corporation.
Copyright © 2002. Nokia Home Communications.
All rights reserved.
Contact information:
Customer Services - 01793 556 046
Warranty - Freephone 0800 0850 836
NHC.sales@nokia.com
www.nokia.com
Note: Contact information for ITV Digital refers to subscription services only
*For details on your local TV aerial installer contact cai: Tel: 020 8902 8998,
www.cai.org.uk
GB 3
Customer Services
0808 100 0101
MEDIAMASTER 9850 T
Please be aware that from time to time the Mediamaster may be
automatically updated ‘over the air’ and new software can change
the functionality of the Mediamaster.
The EMC Directive 89/336/EEC is applied to this product.
Contents
Welcome to digital terrestrial television 4
General operation of your ITV Digital
Mediamaster 4
For your safety 4
Remote 5
Product overview
Rear panel 6
Front panel 6
Installation 7
About the SCART sockets 7
Preparing the remote 7
Inserting your ITV Digital Smartcard 7
Connecting the Mediamaster 8
Connecting the Mediamaster to a TV 8
Connecting to a TV and a video 8
Connecting to a satellite receiver and a video 9
Connecting to a Hi Fi system 9
Connecting to the telephone wall socket 9
Tuning procedure when RF connections
are used 10
Getting started 11
General information 11
Switching on for the first time 11
Displaying a channel 12
Beginning your subscription 12
Selecting channels 12
Switching between digital and analogue
channels 12
Using the channel list 13
Renumbering the channels 13
The on-screen tv guide 14
Setting up your favourite channels 15
Using parental lock 16
Setting your parental code for the first time 16
To change your parental code 16
Selecting channels to be locked 17
Watching your locked channels 18
To unlock individual channels 18
To unlock all channels 18
Setting the timer and video recording 19
General information 19
Setting the timer 19
Deleting a timer 20
Timer alarm 20
Setting your video 21
Using digital teletext 21
Using a digital text TV channel 21
Using text services in a digital TV channel 21
Checking your digital updates 22
Postbox 22
Smartcard data 22
Setting the viewing preferences 23
Preferred language 23
Subtitles 23
TV volume 23
Info display time 23
Timer alarm 23
Time and date 24
Settings for your TV and video 24
TV screen 24
TV sound 25
TV standard 25
Video sound 25
Video standard 25
Output channel 25
Modem settings 26
ITV Digital technical information 26
Signal strength 27
Manufacturer data 27
Auto update 27
Searching for channels 28
Adding new channels 28
Replacing the whole channel list 28
Trouble shooting guide 29
Front panel display 31
Technical specifications 32
Menu screen structure 33
GB 4
Customer Services
0808 100 0101
General operation of your ITV Digital Mediamaster
Throughout this manual you will notice that the everyday operation of
your ITV Digital Mediamaster is based on a series of user friendly
on-screen displays and menus. These displays will help you get the
most from your ITV Digital Mediamaster, guiding you through initial
installation, channel selection, timer settings and many other functions.
Functions can be carried out using either the buttons on the front of
your Mediamaster or on the remote. However we suggest that you
will find it easier to use your remote in most instances. If at any time
when using the menus you want to return to the normal TV picture,
press either the EXIT or MENU button.
Included with your ITV Digital Mediamaster is the ITV Digital ‘starter
pack’. It contains the leaflet ‘How to switch on in one easy go’. This
has simple instructions on how to connect and start up the ITV Digital
Mediamaster. Your Smartcard from ITV Digital is also included with this
leaflet.
Should you experience any difficulties with the operation of your
ITV Digital Mediamaster, please consult the relevant section of this
book, including the trouble shooting guide, or if you need more help
call: ITV Digital Customer Services 0808 100 0101.
Allow clear space around the Media-
master for sufficient ventilation.
Do not cover the Mediamaster or place
it on a unit that emits heat.
Use a soft cloth and a mild solution of
washing-up liquid to clean the casing.
Never allow liquids, spray or other
materials to come into contact with the
inside of the Mediamaster.
Do not connect or modify cables when the
Mediamaster is plugged in.
Do not remove the cover.
Do not allow the unit to be exposed to hot,
cold or humid conditions.
Nokia is proud to offer a high quality product.
To keep this level of quality, service should
be carried out only at a Nokia authorised
service centre.
Please note that the only way to isolate the
Mediamaster completely from the 230 V
mains supply is to unplug the mains lead!
For your safety
Welcome to digital terrestrial television
The simplest way to get digital television is here. No dish. No cable.
Simply an aerial. It is, without doubt, the most exciting development
in television history since the first-ever broadcast in 1936.
In the last 60 years, there have been up to five normal channels on
analogue television. Digital terrestrial television changes that.
ITV Digital is the next step in television. Simply plug in your
ITV Digital box for a feast of mouth watering television.
ITV Digital lets you pick and choose the Primary channels you want
to watch.
Subscription channels from ITV Digital, together with free-to-view
channels from the BBC* and ITV, cover everything from sports and
movies to news and current affairs, all with improved picture and
sound... and widescreen too. No need for dishes. No need for cables.
All you need is ITV Digital.
* BBC services are provided free as part of the licence fee.
GB 5
Customer Services
0808 100 0101
To turn the Mediamaster into / out of standby mode.
TV DTV To switch between digital terrestrial TV, analogue TV,
digital satellite TV signal and VCR, when your systems
are connected by SCART leads.
To turn the sound off/on (mute) from your Mediamaster
without having to use your TV remote.
- + To adjust the volume of digital programmes, without
having to use your TV remote.
0 - 9 To change channel and to select individual menu op-
tions.
INFO To display the on-screen TV guide, with information
about current and next programmes.
TEXT To use for digital text information services.
EXIT To return from a menu to normal TV picture.
MENU To display or exit from the main menu.
GUIDE To access future interactive and pay-per-view services.
P+ P- To change channels by stepping up and down.
▼ ▲ To move the highlighted box up and down in menus, or
scrolling through channels when using the on screen tv
guide.
To make changes to settings once you have selected a
particular menu option.
At the moment, these have no function.
SELECT To confirm choices and selection of a highlighted item.
To display the channel list.
RED The coloured buttons are used in a number of areas
GREEN including teletext services, when using the menus or
YELLOW the on-screen tv guide.
BLUE
Some functions can be operated with the front panel
buttons of the Mediamaster. The buttons are identified
in the same way as those on your remote.
For inserting the batteries in the remote, see page 7.
Throughout this manual, you will find that all daily functions can be carried out using the
remote. This section explains the function of each button.
Remote
GB 6
Customer Services
0808 100 0101
44 10285
230 V
±15%
50 Hz
WARNING!
DO NOT OPEN –
ELECTRICAL
SHOCK HAZARD
DIGITAL AUDIO
AUDIO
R
L
TV AERIAL
TELEPHONE
SERIAL
AUX
TV
TV / VCR
AUDIO L R
phono connectors
Stereo outputs for
connection to a HiFi
system
TV SCART
for the SCART
connection to
the TV
AUX SCART
for the SCART connection
to a video recorder, or an
analogue satellite receiver
DIGITAL AUDIO
phono connector
S/PDIF output for
connection to e.g.
a HiFi system
Mains lead
230 V AC
+/- 15%,
50 Hz
Rear panel
SERIAL
for PC or
modem
connection
Slot
for the CI
module
for several functions,
e.g selecting channels,
highlighting an option
within a menu or
scrolling through
channels
Display
shows channel information,
error messages, post message,
remote commands and time in
standby mode
Front panel
Slot
for the
ITV Digital
Smartcard
TV AERIAL
for a terrestrial
(conventional) TV
aerial or an additional
small indoor antenna
TV / VCR
for an RF-lead
to the aerial
input of the TV
or a video
Button
for the CI
module
release
TELEPHONE
for modem
connection to the
telephone wall
socket
to bring the
Mediamaster
into/out of
standby
SELECT
for confirming
choices and to
display the
channel list
for selecting
settings in a
particular menu
MENU
to select
Main
menu
RESET
to restart the
Mediamaster
GB 7
Customer Services
0808 100 0101
The box for your ITV Digital Mediamaster should contain the
following items:
the ITV Digital Mediamaster
•a remote with 2 AAA batteries
aerial/RF lead (double screened 1,5 metres)
SCART lead (fully featured 1,0 metre)
telephone modem cable (10 metres with a T-splitter)
•a user’s manual
ITV Digital starter pack
Installation
About the SCART sockets
The rear panel of the Mediamaster is equipped with 2 SCART
sockets (see diagram). When you connect other products
to any of these sockets, always use fully featured SCART
leads (as supplied). There are “less well specified” SCART
leads on the market, however picture quality could be reduced.
SCART leads are also necessary to get stereo sound from a
stereo TV and video.
SCART socket
Preparing the remote
Remove the cover on the battery compartment at the bottom
of the remote.
Insert the 2 x AAA (1,5 V) batteries, as shown in the diagram,
taking care to observe the + and - markings indicated inside.
Replace the cover.
SCART lead
RF lead
Telephone
modem
cable
Starter pack
User’s
Manual
Remote &
batteries
Inserting your ITV Digital Smartcard
Insert your smartcard fully into the slot, behind the lid in the
front panel of the Mediamaster so that the gold chip and the
arrow faces downwards and inwards (see diagram
opposite).
After inserting the card, leave it in the slot permanently. Do not
remove it again, unless ITV Digital asks you to do so.
Note! The gold chip
and the arrow must be
on the underside of the
Smartcard
Important
Documents
Please stop
and read this first
It’s vital if you
want to get on
Your ITV Digital
Viewing Smart-
card is inside
GB 8
Customer Services
0808 100 0101
Connect the SCART lead (supplied) between the main SCART
socket on the TV and the TV SCART socket on the
Media master.
Connect the RF lead (supplied) between the TV/VCR output on
the Mediamaster and the TV aerial input on your TV.
Connect the ordinary TV aerial directly to the TV AERIAL input
socket on the Mediamaster (or use an indoor aerial).
Connecting the Mediamaster to a TV
Connecting to a TV and a video
Refer to your video’s manual for full instructions.
Connect one SCART lead between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
Connect another SCART lead between the video
and the AUX SCART socket on the
Mediamaster.
Connect an RF lead from the TV/VCR output on
the Mediamaster to the TV aerial input on the video.
Connect an RF lead from the RF output on the video
to the TV AERIAL input socket on the TV.(This connection
will already be in place. If so, you need not change it).
Connect the ordinary TV aerial directly to the TV AERIAL input
socket on the Mediamaster.(This will previously have been in
the back of your video).
There are many different types of TV/video and other equipment
that you can connect to the Mediamaster.
In this manual you will see some of the most common ways to
connect your equipment.
If you use RF leads you have to tune your TV and video manually
to the Mediamaster (see page 10).
If you have problems with your connections and need help,
contact ITV Digital Customer Services 0808 100 0101.
Follow connection details from above, but without the 2nd
SCART lead.
Your video will then need to be manually
tuned to your Mediamaster
1
2
If your TV has a SCART socket, but your video does not
Aerial
SCART
RF
2
1
RF
RF
Aerial
SCART
SCART
Connecting the Mediamaster
video
video
Mediamaster
Mediamaster
TV
SCART
RF
Aerial
Mediamaster
1
2
GB 9
Customer Services
0808 100 0101
Connecting to a satellite receiver and a video
Connecting to a HiFi system
Connect an RCA/Cinch stereo cable from the AUDIO L R
sockets on the Mediamaster to the LINE, AUX, SPARE or
EXTRA input sockets on your HiFi system.
If available you can connect an RCA/Cinch single cable from
the DIGITAL AUDIO socket on the Mediamaster to your HiFi
system or Dolby Pro Logic system.
Note: To avoid interference you must use a screened video
cable.
Satellite receiver
RF
Aerial
RF
SCART
Dish
LNB
cable
Connect a SCART lead between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
Connect a SCART lead between the TV SCART socket on the
satellite receiver and the AUX SCART socket on the
Mediamaster.
Connect a SCART lead between the video
and the 2nd SCART socket on the
TV (if available).
Connect an RF lead from the RF output on the
video to the TV aerial input on the TV.
Connect an RF lead from the RF output on the
satellite receiver to the RF input socket on the video.
Connect an RF lead from the TV/VCR output on the
Mediamaster to the RF input socket on the satellite receiver.
Connect the ordinary TV aerial to the TV AERIAL input socket
on the Mediamaster.
Connect the coaxial cable between the LNB and the LNB
socket on the satellite (analogue/digital) receiver.
Both the video and the analogue satellite receiver must be
tuned with different UHF channels (not occupied between 21
to 69) .
The analogue satellite receiver must be switched to OFF
(standby) when you want to watch digital terrestrial
channels from the Mediamaster.
Connecting to the telephone wall socket
In the future you will be offered interactive and pay-per-view
services from ITV Digital. You may then need to connect the
Mediamaster to the telephone line.
•To connect the telephone modem cable (supplied) simply plug
the cable from the Mediamaster TELEPHONE socket to the
telephone socket. Until you need to connect this, please keep
the cable in a safe place.
Media-
master
Mediamaster
Mediamaster
2
1
video
GB 10
Customer Services
0808 100 0101
If you have connected your Mediamaster using SCART leads, you
do not have to manually tune your Mediamaster to your TV or
video. The steps below explain what to do if you have been
unable to use SCART in your connection.
To tune your TV for RF connections you might also need your TV
manual as well as this manual.
Plug in your TV, Mediamaster (and video).
Switch on the TV.
Press
to switch the Mediamaster on.
Tuning your TV to the ITV Digital Mediamaster
Select a programme number on the TV that is not currently
used for a terrestrial TV channel.
Follow the instructions in your TV user manual to tune the TV
channel selector to channel 21(this is the Mediamaster’s
factory preset RF channel). If you are already using this
channel e.g. for a terrestrial TV channel, select another non
occupied UHF channel between 21to 69 on the TV.
For example, if you then select UHF channel 50 on your TV,
you must change your Mediamaster to the same channel. To
do this, refer to page 25 and change option 6 within the ‘tv and
video settings’ menu.
When you have correctly changed the UHF channel number
you will see the ‘
welcome
’ message on the TV screen
Follow the instructions in your TV manual to store this as your
digital terrestrial channel. You will have to select it when you
want to watch digital terrestrial channels.
Once the welcome message is visible press the SELECT
button on the Mediamaster remote to start the Installation
procedure.
If the
welcome message
is missing or there is interference on
other channels you will have to change the UHF channel
number. Press MENU on the front panel or on the remote. You
will see the main menu. Select
viewing preferences
, then
tv
and video settings and UHF channel number.
See page 25.
If you have a video connected it must be tuned with different
UHF channel (between 21 to 69) than the Mediamaster.
Tuning procedure when RF connections are used
welcome
Press select on your remote to
get started
select
GB 11
Customer Services
0808 100 0101
Getting started
General information
Once you have connected your Mediamaster to your equipment
properly, you are ready to begin searching for new channels.
(One of the easiest methods of connection is explained in the
‘How to switch on in one easy go’ leaflet also included with your
Mediamaster. We recommend that if possible, you use this guide
to install your Mediamaster).
Pressing the SELECT button will confirm a selection within a
menu.
Pressing EXIT will remove the menu from the screen or the RED
‘back’ button to move a step back at a time.
Use the and buttons to move up and down and
or
buttons to move left or right within a highlighted box. If you need
to use the coloured buttons or some other buttons it will be
displayed on each menu.
Switching on for the first time
Plug in your TV, Mediamaster and video. Switch on the TV
first. Press to switch the Mediamaster on.
The front panel display will flash a few times (- -: - -). When it
stops flashing you are ready to go on.
Now you will see the ‘
welcome
’ message on the screen.
If the welcome message does not appear ...
If you don’t see the
welcome
message it could be because
your Mediamaster has been switched on before. Press MENU
to display the ‘
main menu
’. If the welcome screen or main
menu aren’t visible you may need to press the TV/DTV but-
ton several times if the system is connected by SCART leads.
Alternatively, use the appropriate button on your TV remote to
select the AV channel (EXT or AV).
Press SELECT on the remote to select the
‘main menu’
.
Press to highlight ‘
getting started
’. Press SELECT to start
the channel search.
You may see a menu including options to ‘add channels’ or
‘store channels’. Choose option 4 ‘
store channels’
and press
SELECT.
Your Mediamaster will now automatically search for your new
digital channels. This could take several minutes. You will see
a bar on the menu telling you how the search is progressing.
As the search ends, you will briefly see a message that
indicates the Mediamaster is storing the channels. You will
then see a list of the channels that have been found and
stored.
welcome
Press select on your remote to
get started
select
1 setting the timer
2 choosing favourite channels
3 parental control
4 viewing preferences
5 getting started
6 updates
7 technical information
main menu
select
store channels
back
Your set top box is now searching for all
available channels.
This may take about 20 minutes.
Please wait.
0 25 50 75 100
%
number of channels found 13
GB 12
Customer Services
0808 100 0101
Displaying a channel
After the Mediamaster has found and stored the channels, it
automatically displays the
channel list
menu.
Press EXIT or SELECT to begin watching a channel. To select an-
other channel, use the number buttons on the remote or the
and buttons to scroll down the list of available channels.
The Mediamaster always displays the first channel on the menu.
This is a free channel. It means you can see it even if you haven’t
started your subscription yet.
Beginning your subscription
If you haven’t yet done so, take your Smartcard out of its
sleeve in the ‘How to switch on in one easy go’ leaflet. Note
the Smartcard number and put it into the slot behind the flap
of your Mediamaster (see page7).
Call the ITV Digital activation team on 0870 600 1616.
They will ask you for some information to confirm your account
and will then activate your Smartcard.
Selecting channels
When you change channels, a channel-banner appears briefly at
the top of the screen. The channel number, name and any
favourite or locked channel symbol is displayed. You can adjust
the length of time that the banner will display on the menu or take
it away (see page 23).
The channel number is also displayed on the front panel.
In either case, the Mediamaster will wait approximately one sec-
ond before changing channels after the selection has been made.
•To change channels press P+ or P- or the number buttons
IMPORTANT – using the number buttons will enable you to
select ALL channels, regardless of whether they have been
selected as your favourite channels. However, the P+ or P- or
and buttons will select favourite channels only, if the fa-
vourites mode is activated.
Switching between digital and
analogue channels
To switch between watching digital channels via your
Mediamaster and standard analogue channels on your TV or your
video, use the TV/DTV button. The button will only function if you
have connected your digital box using the scart lead supplied.
•Press TV/DTV to switch between digital terrestrial TV,
analogue TV, digital satellite TV and video, when your systems
are connected by SCART leads. (The satellite receiver must be
put into standby when you are watching terrestrial digital TV).
Alternatively press the appropriate button on your TV remote
to select the AV channel (EXT or AV).
UK Gold
13
Childrens hour
channel list
channel list
back
view this channel
1 BBC ONE
2 BBC TWO
3 ITV
4 CHANNEL 4
5 CHANNEL 5
6 ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9 TELETEXT
select
GB 13
Customer Services
0808 100 0101
The channel list is an alternative way of viewing what channels
are available on your ITV Digital Mediamaster. The list will display
ALL channels over the programme you are currently watching and
will also indicate which channels have been selected as your
favourites or have been locked.
Press SELECT to display the channel list whilst viewing any
channel.
The display will show a total of 6 channels at a time,
consecutive to the channel you are currently watching, along
with symbols that identify whether channels are your
favourites or are locked. The channel you are currently
viewing will be highlighted on this list.
•Press or to move through the channel list. When you
reach the bottom of one menu, continue to press the to
scroll to the next screen. Alternatively, pressing the
or
button will scroll a full page at a time.
Press SELECT to view the channel you want to watch or
press EXIT to remove the channel list from your screen
without changing channels.
Renumbering the channels
This feature enables you to choose the order in which your
channels are stored following initial installation.
You are only able to swap channels around, two at a time,
preventing you from being able to delete a channel by accident.
Press MENU to select the
main menu.
Select
getting started
by pressing 5 (or highlighting it and press
SELECT.)
•Within the
getting started
menu select
change channel
numbers
by pressing 2 (or highlighting it and press SELECT).
The screen will display a complete list of channels currently
available. This screen will also indicate whether they have
been selected as your favourite or locked channels.
•To move a channel to an alternative location, firstly highlight
the channel using the or and press SELECT to choose
that channel as indicated at the bottom of the screen.
Now select the new channel location using the or but-
tons to highlight the channel number where you want to move
the channel to.
Press SELECT again to swap the channels you have
highlighted.
Repeat these steps to move further channels.
Press EXIT to return to a normal TV picture.
Using the channel list
To reveal further
sections of the
list
getting started
1 channel list
2 change channel numbers
3 add channels
4 store channels
back
select
change channel
numbers
back
10 BBC TEXT
11 ITV TEXT +
12 SKY SPORTS 1
13 SKY PREMIER
14 SKY SPORTS 3
15 SKY MOVIE MAX
16 MUTV
17 SKY 1
18 CARTOON NETWORK
choose channel to renumber
select
BBC ONE 1
BBC TWO 2
ITV 3
CHANNEL 4 4
CHANNEL 5 5
ITV 2 6
select
exit
GB 14
Customer Services
0808 100 0101
The on-screen tv guide
When you are watching a digital channel you can display an on-
screen tv guide to see information about current and next pro-
grammes.
Press INFO to activate the on-screen tv guide.
The banner at the top of the screen will always display the
current channel number and name, the name of the current
programme and the time.
The banner at the bottom of the screen will initially show
the same information and additionally, the name and start time
of the current and next programme.
It also indicates whether it is broadcast in mono or stereo and
also the type of programme (such as film, drama or comedy).
Press or the number buttons to see programme
information for other channels at the bottom of the screen
without changing the channel you are currently watching.
Note: If the favourite channels function is active, pressing the
or buttons when using the on-screen tv guide will display
only your favourite channels and the current channel.
Alongside the programme names, you can view additional
information about both the current and the next programme.
Press the BLUE button to see information about the current
programme.
Press the YELLOW button to see information about the next
programme.
Press or if not all of the further information is displayed.
Press the coloured buttons again to remove the information.
Press SELECT to change to that channel, when the
programme you want to watch is displayed at the bottom of
the screen.
Press INFO again or EXIT to return to normal TV viewing
without changing a channel.
Note: The channel cannot be changed however if you are
viewing information for the NEXT programme.
Channel number
Channel name
Symbols:
a locked or
unlocked
channel
a favourite
channel
BBC TWO
BBC TWO
13:30 Cartoon Time
14:30 The Travel Show
info
info
Current programme
and its start time
Next programme
and its start time
Current time
BBC TWO
BBC TWO
13:30 Childrens program
14:30 Sport news
info
info
close
14:30 - 15:45
Documentary
stereo subtitles
Reports this week from
India and Canada.
Start and end
times for the
programme
Detailed description
of the programme
To remove the
further informa-
tion
Programme
type, its sound
and if subtitles
are available
GB 15
Customer Services
0808 100 0101
Setting up your favourite channels
This function enables you to select channels as your ‘favourite
channels’ which are then easier and faster to access.
When using the P+ and P- buttons to change channels, and the
favourite mode is on, only your favourite channels will be
available for selection. Similarly, with the favourites mode on and
when using the on-screen tv guide, the or buttons will only
select your favourites.
You can view a list of your chosen favourite channels by
selecting the channel list, or the favourite channels screen.
Press MENU to select the
main menu.
Select
choosing favourite channels
by pressing 2 (or
highlighting it and press SELECT.)
Press or to highlight the favourite channel, then press
SELECT. A heart symbol will appear alongside the channel
name to indicate it has been selected.
Repeat these steps until you have marked all the other
channels you wish to add to the favourite list.
•To remove a favourite channel from your list press or to
highlight the channel you want to remove then press SELECT.
The heart symbol will disappear.
Press the GREEN button to activate the favourite mode. The
favourite mode status is displayed on the top right of the menu
as ‘favourites are on’ or ‘favourites are off’.
Press the RED button to return to the previous screen, or press
EXIT to return to normal TV viewing.
favourite channels
back
1 BBC ONE
2 BBC TWO
3 ITV
4 CHANNEL 4
5 CHANNEL 5
6 ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9 TELETEXT
switch favourites on
confirm as a favourite
favourites are off
select
favourite channels
back
1 BBC ONE
2 BBC TWO
3 ITV
4 CHANNEL 4
5 CHANNEL 5
6 ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9 TELETEXT
switch favourites off
favourites are on
confirm as a favourite
select
GB 16
Customer Services
0808 100 0101
Using parental lock
This feature will enable you to limit access to any particular
channel.
When this option is selected for the first time, you will be asked
to enter your code before certain other functions can be
performed.
Only people who know the code can then unlock a channel.
Setting your parental code for the first time
Press MENU to select the
main menu.
Select
parental lock
by pressing 3 (or highlighting it and press
SELECT.)
Select
enter new parental code
by pressing 1 (or highlighting
it and press SELECT.) The menu to the right will now be
displayed.
Select a 4-digit code (not 0000), using the number buttons.
As you enter the code, it will be displayed on the screen. If you
enter an incorrect number, use the button to move back one
space and make an amendment.
•Please keep a note of your parental code in a safe place for
future reference.
Press SELECT to confirm and store the code.
If for any reason the code is not accepted, the entry will be
cleared and you will be prompted to enter another code.
Press the RED button to return to the previous
parental lock
menu or press EXIT to return to normal TV viewing.
If you forget your parental code, contact ITV Digital Customer
Services.
To change your parental code
Once a code has been entered, you can change the parental code
at any time. In order to do this, you will need to enter the current
code before a new code can be entered.
Press MENU to select the
main menu.
Select
parental lock
by pressing 3 (or highlighting it and press
SELECT.)
Select
change parental code
by pressing 1 (or highlighting it
and press SELECT.)
Enter your current code and then press SELECT. Asterisks will
be displayed as the code is entered. If necessary, use the
button to correct any mistakes.
parental lock
1 change parental code
2 choose channel to lock or unlock
back
select
parental lock
1 enter new parental code
2 choose channel to lock or unlock
back
enter parental code
back
select
confirm your code
+ + + +
select
parental lock
1 enter new parental code
2 choose channel to lock or unlock
back
select
GB 17
Customer Services
0808 100 0101
If this code is correct, you will be asked to enter a new code.
Enter your new 4-digit code (not 0000) and then press SELECT
to confirm.
An on-screen message asks you to remember your new code.
If you entered a wrong code at any stage, an on-screen display
will inform you what to do.
Press the RED button to return to the previous
parental lock
menu or press EXIT to return to normal TV viewing.
Selecting channels to be locked
Press MENU to select the
main menu.
Select
parental lock
by pressing 3 (or highlighting it and press
SELECT.)
Enter your parental code and then press SELECT.
Select
choose channels to lock or unlock
by pressing 2 (or
highlighting it and press SELECT.) The screen to the right will
now be displayed.
Press or to highlight the channel you want to lock. Press
SELECT. A padlock symbol will appear alongside the selected
channel to confirm your choice.
Repeat this step until you have identified all the channels you
want to lock.
Press the GREEN button to lock (closed padlock) or to unlock
(opened padlock) channels. ‘locks are closed’ or ‘locks are
open’ will appear at the top of the screen.
Press the RED button to return to the previous
parental lock
menu or press EXIT to return to normal TV viewing.
If you wish to unlock a channel permanently, repeat the above
steps, highlighing the channel that you want to lock and press
SELECT. The padlock symbol will disappear.
Note: You should briefly put your Mediamaster into standby
to ensure that locked channels are stored in the memory.
parental lock
1 enter new parental code
2 choose channel to lock or unlock
back
enter parental code
back
select
confirm your code
+ + + +
select
lock or unlock
back
1 BBC ONE
2 BBC TWO
3ITV
4 CHANNEL 4
5 CHANNEL 5
6 ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9 TELETEXT
lock on
lock selected channel
locks are open
select
GB 18
Customer Services
0808 100 0101
Once you have locked all the required channels, there are 2 ways
to regain access and watch these channels. You can either
unlock individual channels as you select them, or return to the
‘choose channels to lock or unlock’
menu and temporarily unlock
them all.
To unlock individual channels
When you select a channel that has been locked you will not
be able to see or hear the locked channel until your code has
been entered. Press SELECT to display the screen opposite.
Then enter your parental code. Asterisks will be displayed in
the 4 digit field.
Press SELECT to confirm the code.
If necessary, press to move back and make an amendment
if you enter wrong code.
The locked channel will appear on the TV screen.
If you enter an incorrect number, a message will inform you.
Press SELECT and try again.
Note: If after unlocking a channel this way, you change to
another channel, you will have to repeat the above steps to
view the locked channel again.
To unlock all channels
If you temporarily want to unlock all your locked channels, the
easiest way to do this is from the
‘lock or unlock’
menu.
Press MENU, then select option 3,
parental lock
and option
2,
choose channels to lock or unlock
.
Enter your parental code when prompted.
Press the GREEN button to unlock (opened padlocks). ‘locks
are open’ appear below the menu title.
You will now have access to all your locked channels without
having to enter your parental code for each channel.
Note: Don’t forget to lock your channels again after unlocking
them all in this manner (use the same procedure as described
above).
Watching your locked channels
select
back
UK Gold
13
enter your code ++++
confirm your code
look or unlock
lock or unlock
back
1 BBC ONE
2 BBC TWO
3 ITV
4 CHANNEL 4
5 CHANNEL 5
6 ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9 TELETEXT
open locks
lock selected channel
locks are open
select
GB 19
Customer Services
0808 100 0101
Setting the timer and video recording
General information
The ‘timer settings’ function enables you to program your
Mediamaster to switch on and off at selected times, for up to 8
different time slots. Your video can then be set to record digital
programmes.
Pressing the RED button will return you to the previous part
of the procedure, or
Pressing EXIT will discard any changes that have been made
and return your Mediamaster to normal operation.
Please note that it is NOT possible to record from one
digital channel and watch an alternative digital channel at
the same time.
If you wish to watch TV while you record a digital terrestrial
channel, you can watch the channel you are recording or an
analogue channel or vice versa.
Make sure that the time and date are correctly set (see page
24).
If you enter a setting that overlaps another setting, a screen
will be displayed to warn you of the conflict.
If you set more than one timer, the list of timers will rearrange
automatically and the earliest
‘timer’
becomes
1.
•You can set the timer (without setting your video) to remind
you when ‘favourite’ programme will start.
Setting the timer
Press MENU to select the
main menu.
Select
setting the timer
by pressing 1 (or highlighting it and
press SELECT.)
The screen will now show a list of 8 timer slots, each one
indicating that it is either available for programming, or that it
has a programme already stored in it.
Select a free row by pressing the appropriate number or high-
lighting it and press SELECT. The screen opposite is displayed.
Use the number buttons to key in the settings for the differ-
ent items (the date, channel number, start and end times).
Press button to confirm the entry and move to each item.
•You must use four digits for the date. Only the day and month
should be entered, the receiver will automatically know the
year, e.g. for the 8
th
February 1999, enter 0802.
If you do not know the channel number press the GREEN but-
ton to display the channel list on the screen. Press or to
highlight the channel you require and press SELECT. The
channel number will then be added to the
set the timer
menu.
•You must use the 24-hour clock for the time (e.g.8.25 pm,
enter 2025).
If you enter something incorrectly, a message will be
displayed. Use to make a correction.
setting the timer
delete this timer setting
back
DON’T FORGET TO PROGRAM YOUR VIDEO
1 available
2 available
3 available
4 available
5 available
6 available
7 available
8 available
select
setting the timer
choose a channel
date 08.02
channel 5 or
start time + +:+ +
end time + +: + +
recording repeat once only
back
confirm setting
timer 1
DON’T FORGET TO PROGRAM YOUR VIDEO
select
GB 20
Customer Services
0808 100 0101
When you highlight ‘
recording repeat
’ use or to select
how frequently you want the recording to be made. The screen
display will give you options of ‘once only’, ‘daily’ or ‘weekly’.
Select the option you want. The last two alternatives are
useful when recording a series of programmes.
Press SELECT to save the settings when all the details have
been set. If the channel is locked, enter your parental code and
confirm with SELECT. The programme details will then be
displayed on the
setting the timer
menu.
Repeat these steps for other timer settings.
Press EXIT to return to TV viewing.
Press
to set the receiver in standby to activate the timer
settings.
Note: Five minutes before the start time the Mediamaster will
switch onto the preprogrammed channel. ”rEC” is shown on
the front panel display. The timer will switch back into standby
five minutes after the end time.
Deleting a timer
Press MENU and select 1 for the
setting the timer
menu.
Press or to highlight the timer event you want to delete.
Press the BLUE button. Followed by number button 1 to
delete the timer.
Timer alarm
If you have finished watching programmes on your
Mediamaster, you should leave it in standby mode in order for
the timer settings to be activated.
If however you wish to continue watching other digital
channels after setting a timer, you can do so by changing
channels in the normal way.
If you are watching another digital channel when the timer is
due to start, the timer alarm will sound a short ‘beep’ and
rEd” will be shown on the front panel display.
Press the Red button. The screen opposite is displayed.
You now have two choices:
Press SELECT if you want to change to the channel set in the
timer. Your video will then record the correct channel.
Press the Red button if you want to stay on the channel you
are watching. In this case the video will record the channel you
are watching and not the channel you set in the timer.
select
MENU PROGRAMMING
watch - record
stay on this channel
soon
MTV
18
setting the timer
delete this timer setting
back
DON’T FORGET TO PROGRAM YOUR VIDEO
select
1 08.02 BBC 1 15:30 - 16:30
2 09.02 ITV 08:30 - 09:30
3 available
4 available
5 available
6 available
7 available
8 available
delete this timer setting
DON’T FORGET TO PROGRAM YOUR VIDEO
1 08.02 BBC 1 15:30 - 16:30
2 09.02 ITV 08:30 - 09:30
3 available
4 available
5 available
6 available
7 available
8 available
1 yes
2 no
setting the timer
back
select
do you really want to
delete
this timer setting?
enter parental code
GB 21
Customer Services
0808 100 0101
Using digital teletext
In addition to normal teletext services available on analogue
terrestrial channels, your Mediamaster has access to dedicated
digital teletext channels. The digital services include high quality
text and graphics as well as advanced navigational options. You
can use the digital text information services even if you don’t have
a Teletext TV.
Using a digital text TV channel
Select the digital text channel. Check the channel list or the
TV guide for the channel number.
Individual teletext pages can be selected by using the number,
▲ ▼ or coloured buttons and the SELECT button.
When you have finished viewing the digital text channel,
select an alternative channel in the normal manner.
Using text services in a digital TV channel
Teletext services may also be available on other digital channels.
The operation and appearance of these services is similar to what
you may be used to on your TV.
Sometimes the text services can be indicated by a symbol or
other functions on the screen, superimposed on the channel you
are watching.
Press TEXT to display text services.
Use the number buttons on your remote to select the
different pages. Use the colour buttons for the functions
shown on the screen.
Press TEXT again to return to a normal TV viewing.
Setting your video
These steps above will now activate your Mediamaster. But if you
want to record, you must also set up your video at the
appropriate times.
As previously mentioned it is not possible to record one digital
channel whilst watching another.
You can however record a digital channel via your Mediamaster
and watch an analogue channel on your TV, or vice versa.
GB 22
Customer Services
0808 100 0101
Your Mediamaster has the ability to display messages that have
been sent to you by a broadcaster, perhaps about a special offer
or your current subscription package.
You will be advised when a message is waiting to be read by the
code ‘POSE’ appearing in the display on the front of your
Mediamaster.
Postbox
Press MENU to select the
main menu.
Select
ITV Digital updates
by pressing 6.
Select
check your postbox
by pressing 2.
•Your current messages will then be displayed. The most recent
message appears at the top of the screen, with previous
messages following.
Press ▲ ▼ if you wish to check other messages. Each time
you re-enter the postbox, the latest message will always
appear first.
NOTE: Messages cannot be manually deleted, but the oldest
messages are automatically removed as new messages are
received.
Press the RED button to return to the previous menu or press
EXIT to return to normal TV viewing.
Smartcard data
In this menu you can check information about your smartcard.
Press MENU to select the
main menu.
Select
ITV Digital updates
by pressing 6.
Select
smartcard data
by pressing 1.
Press the RED button to return to the previous menu or press
EXIT to return to normal TV viewing.
Checking your digital updates
postbox
back
Watch out for the new channels.
They will start tomorrow.
New channels
Please contact ITV Digital Customer
Service on 0808 100 0101. Thank you.
Contact ITV Digital
smartcard data
subscription ends on
15 DEC 99
GB 23
Customer Services
0808 100 0101
Setting the viewing preferences
The Mediamaster has three menus to set your viewing
preferences. Each have been factory-set for the most commonly
used settings.
Press MENU to select the
main menu.
Select
viewing preferences
by pressing 4.
Select
ITV Digital box settings
by pressing 1.
Press or to select the required setting numbered 1 to 6.
Press or to make the required adjustment.
Press the RED button to return to the previous menu or press
EXIT to return to normal TV viewing.
Preferred language
When your Mediamaster is first switched on, the default setting will
be English. Other options are Welsh and Gaelic. If the language
selected is not available, the box will use English as a default.
Subtitles
Similarly, this option will allow you to choose the language that
subtitles are displayed in. Options are English, Welsh, Gaelic and
none. If any of the languages are selected, subtitles will always
be displayed when they are available.
Options also include the same language but for the hard of
hearing, these are identified by a symbol after the language and
include description of activity within the programme, such as
laughter or applause.
If the ‘none’ option is selected, subtitles will not be displayed,
even if they are available.
You will know if subtitles are available for a programme either by
checking the on-screen tv guide, or if you are made aware of this
by a broadcaster.
TV volume
This option sets the maximum sound output level from your
Mediamaster to your TV. This is factory set to a medium level, but
you may notice that when switching between channels on your
digital box and channels on your normal TV, that the volume
differs. Use the
or to adjust the level required.
Info display time
With this option you can set the length of time that on-screen
information is displayed. This only applies to screens that you do
not make adjustments to such as channel change. The options
available are off, normal or long.
Note: If this option is set to off, certain menus, including the
channel list, will no longer appear on-screen at all.
Timer alarm
This option enables you to select either ‘visual’ or ‘visual+audio’
for the timer alarm. The alarm is factory set to visual+audio, and
as such will give a warning when a programme is about to start
for which the timer has been set.
set top box settings
back
set date and time
1 preferred language english ☎☎❖
2 subtitles ☎☎☎☎☎☎☎☎☎☎☎❙ none ☎☎☎☎☎☎❖
3 tv volume ☎☎☎☎☎☎☎☎☎☎☎❙ ☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎❖
4 info display time ☎☎❙ normal ☎☎☎❖
5 timer alarm ☎☎☎☎☎☎☎☎☎☎☎❙☎☎visual+audio
6 date and time 15:00
viewing preferences
1 set top box settings
2 tv and video settings
3modem settings
back
select
GB 24
Customer Services
0808 100 0101
Your box will display the code ‘
rEd
’ on the display and will ‘beep’.
More information about the timer function is included on pages
19 and 20 in this booklet.
Time and date
Your Mediamaster will automatically set the current time and date
by taking information from broadcasters. However, should you
wish to adjust these settings, you can do so manually using this
menu.
Use the numeric buttons to enter the correct details.
•You must use six digits for the date. e.g. for the 8
th
February
1999, enter 080299.
•You must use the 24-hour clock for the time (e.g.8.25 pm,
enter 2025).
Press or to set ‘summer’ or ‘winter’ time.
Press SELECT to confirm the settings.
Settings for your TV and video
The settings that appear when you install your Mediamaster have
been set by the factory, and in most cases need not be changed.
With the viewing preferences menu on the screen:
Select
tv and video settings
by pressing 2.
TV screen
This option enables you to tell your Mediamaster whether you
have a 4:3 (normal) or 16:9 (widescreen) TV.
If you select 16:9 in this option, the box will automatically
display any widescreen programmes in the correct format.
If you choose 4:3, a further option will be highlighted below
that enables you to select how you would like a widescreen
programme to be shown on your standard 4:3 TV.
Note: Normal (4:3) is only available if it is selected in item 1 of
this menu
If you have a 4:3 TV, you need to choose whether widescreen
programmes are shown in a ‘letterbox’ format ie. with black bars
at the top and bottom of the TV screen, or whether the
programme is ‘expanded’ to fill the height of the screen, but as
a result parts of the picture at the side are lost. You should choose
options ‘letterbox’ and ‘full screen’ respectively.
‘letterbox format’
‘full screen format’
set top box settings
back
set date and time
1 preferred language english ☎☎❖
2 subtitles ☎☎☎☎☎☎☎☎☎☎☎❙ none ☎☎☎☎☎☎❖
3 tv volume ☎☎☎☎☎☎☎☎☎☎☎❙ ☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎❖
4 info display time ☎☎❙ normal ☎☎☎❖
5 timer alarm ☎☎☎☎☎☎☎☎☎☎☎❙☎☎visual+audio
6 date and time 15:00
set date and time
back
select
confirm
date 08.02.99
time 20:25
winter
GB 25
Customer Services
0808 100 0101
TV sound
This gives you the option of selecting either ‘mono’ or ‘stereo’
sound. As a default, stereo has been selected. You need only
change this selection if you are connecting to a mono TV.
TV standard
If you have connected your Mediamaster and your TV by a scart
lead, you should try adjusting this option to ensure the best
possible picture. The default is to a setting called ‘composite’,
however you may see a picture improvement if you select the
alternative ‘rgb’ option and have a RGB TV.
Change the option as previously described. If you do not notice
any difference in the picture quality, please ensure the setting
remains on ‘composite’ and exit the menu.
Video sound
This gives you the option of selecting either ‘mono’ or ‘stereo’
sound for your video. As a default, stereo has been selected. You
need only change this selection if you are connecting to a mono
video. Please note that in order to record and playback in stereo,
you need to use a scart lead between your Mediamaster and TV.
Video standard
If you are connecting your Mediamaster to a video, this option
enables you to select either pal I or S-VHS, depending on the type
of video you have. As a default, it will have been set to ‘pal I’.
(Please refer to your video’s instruction book if you have a query
about what standard it is.)
uhf channel number
This relates to the output frequency from your Mediamaster to
your TV.
If you have not connected your Mediamaster using a SCART lead,
and you have been unable to tune a channel on your TV or video
to watch pictures from your Mediamaster, you may need to
adjust this setting. It may also require slight adjustment if you can
see a picture but there is also some interference.
If you are in any doubt about adjusting this setting, please
contact ITV Digital Customer Services 0808 100 0101.
tv and video settings
back
1 tv screen ❙☎☎normal(4:3)
normal(4:3) full screen
2 tv sound ☎☎☎☎☎☎☎☎☎☎☎❙ stereo ☎☎☎☎❖
3 tv standard ☎☎☎☎☎☎☎☎☎☎☎❙composite☎☎☎❖
4 video sound ☎☎❙ stereo ☎☎☎☎☎☎❖
5 video standard ☎☎☎☎☎☎☎☎☎☎☎❙☎☎ pal I ☎☎☎☎☎☎☎☎☎☎❖
6 uhf channel number 21 21 69
GB 26
Customer Services
0808 100 0101
You may need to change the settings within this menu when you
connect the Mediamaster to the telephone line.
Select
modem settings
by pressing 3.
Modem
This gives you the option to select whether you are using the
‘internal’ modem or have added an ‘external’ modem connected
to the SERIAL port.
Dialling
This gives you the option to select tone dialling. Most domestic
telephones use tone dialling.
Connection
You will only need to change this to ‘pabx’ if your Mediamaster
is connected to a telephone line that requires you to dial a prefix
(number) for an outside line.
Prefix
This option is only available if you have select ‘pabx’ in the
connection option. Prefix can be: 0,1 - 9,*#.
Wait for dial tone
This option is only available if you have selected ‘pabx’ in the
connection option. Then set what your system requires.
STD code
This allows you to tell the Mediamaster whether it will be required
to dial an STD code. Usually set to no.
Prefix
If you have set STD code to ‘yes’, this allows you to enter the
code.
Modem settings
Technical information
The options contained within the technical information menu
enable you to check the status of your Mediamaster. This is not
something you should need to do, apart from in the unlikely event
of a problem occurring with your box. In this instance, it will help
the ITV Digital customer care people to understand the problem
and resolve it as quickly as possible.
Press MENU to select the
main menu.
Select
technical information
by pressing 7.
1 modem ☎☎☎☎☎☎☎☎☎☎❙ internal ☎☎☎☎❖
2 dialling ☎☎☎☎☎☎☎☎☎☎❙ tone ☎☎☎☎☎☎☎❖
3 connection ☎☎☎☎☎☎☎☎☎☎☎❙ direct ☎☎☎☎☎☎❖
4 prefix ☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎☎❙ 0 ☎☎☎☎☎☎☎☎☎☎☎☎❖
5wait for dial tone yes ☎☎☎☎☎☎☎☎☎❖
6 STD code ☎☎☎☎☎☎☎☎☎☎❙ no ☎☎☎☎☎☎☎☎❖
7 prefix 011
modem settings
back
GB 27
Customer Services
0808 100 0101
CHANGING SETTINGS FOR YOUR TV and VCR
CHANGING SETTINGS FOR YOUR TV and VCR
Signal strength
Select
signal strength
by pressing 1.
This option allows you to check the strength of the signal you are
receiving through your aerial and the UHF channel number. The
colour of the on-screen display will change depending on the
signal strength.The bar is empty if the signal is missing.
Press the GREEN button, enter the channel number and press
the RED button to check the signal strength.
Technical information
Select
ITV Digital data
by pressing 2.
This option shows various information about your ITV Digital
Mediamaster, such as its manufacturer and the versions of
hardware and software that it contains.
Auto update
The Mediamaster has the capability to be updated over the air.
This may update certain menus functions and add new features.
The basic functions will generally be the same.
You can also use the ‘
auto update’
menu to download new data
when your ITV Digital Customer Services asks you or when you
get a message to do so.
Select
auto update
by pressing 3.
Press SELECT to start the update.
While the update is going on you may see the following
messages on the front panel display:
auto Update:
the Mediamaster is searching for an update of the
software and will then restart itself
update Error:
indicates
that no update is av
ailable and that your
Mediamaster already has the latest software
retrying Update:
indicates that there are problems with the update
but your Mediamaster is repeating the update process.
Out of order:
this indicates that your Mediamaster has been
unsuccessful in updating its software, and it may be necessary
to contact ITV Digital Customer Services.
technical information
1 enter new parental code
2 choose channel to lock or unlock
back
auto update
no
select
yes
do you really want
to start a download
to update your
set top box ?
select
technical information
Data
manufacturer Nokia
hardware version 00 00 03 07
software version 00 00 02 09
manufacturer update 00 00 00 00
api version 00 28 a0 04
run version 00 07 03 06
run update version 00 00 00 00
back
back
select
signal strength
enter uhf channel number
uhf channel number
signal strength
good
satisfactory
poor
back
21 21 69
1 2 3 4
GB 28
Customer Services
0808 100 0101
Searching for channels
This function is normally only used when first installing your
Mediamaster, as described earlier in this instruction book. You
should follow these instructions when you wish to re-install your
Mediamaster at an alternative location, or search for new
channels that may have subsequently been launched by the
broadcasters.
Adding new channels
This function should be used when you want to search for any
new channels that may have been launched since you originally
installed your Mediamaster.
Press MENU, then 5
(getting started),
then
3 (add channels)
Your Mediamaster will now automatically search for any new
digital channels. This could take several minutes. You will see
a bar on the menu telling you how the search is progressing.
As the search ends, you will briefly see a message that
indicates the Mediamaster is storing the channels.
Once the box has found any new channels, the on-screen
display will disappear and the new channels will be added into
the channel list.
You can check what channels have been added by looking at
the channel list, also selected from the getting started menu.
If no new channels have been launched, your Mediamaster will
display a message saying ‘no channels found’.
Replacing the whole channel list
Should you want to carry out a new search for all channels, the
store channels option should be selected. In this instance, the
current channels stored in your Mediamaster will be replaced by
those channels found in the new search.
Press MENU, then 5
(getting started)
then
4 (store channels)
Note: As your Mediamaster will have been previously tuned
at this stage, the screen will display a warning that existing
channel information will be lost when this process is complete.
Press SELECT if you wish to continue, alternatively press the
RED button to return to to the main menu and no changes will
be made.
Your Mediamaster will now automatically search for your
digital channels. This could take several minutes. You will see
a bar on the menu telling you how the search is progressing.
As the search ends, you will briefly see a message that
indicates the Mediamaster is storing the channels. You will
then see a list of the channels that have been found and
stored.
store channels
back
Your set top box is now searching for all
available channels.
This may take about 20 minutes.
Please wait.
0 25 50 75 100
%
number of channels found 13
add channels
back
Your set top box is now searching for all
available channels.
This may take about 20 minutes.
Please wait.
0 25 50 75 100
%
number of channels found 5
GB 29
Customer Services
0808 100 0101
What to do if you can’t solve the problem
If you have tried all of the actions suggested above, without solving the problem, please contact
ITV Digital Customer Services 0808 100 0101
Problem
The display on the front panel does
not light up/is not lit.
No sound or picture, but the front
panel shows the time or - -:- -
Bad picture/blocking error.
The front panel shows a channel
number, but you can’t see anything
from digital TV.
When the Mediamaster tries to find
and store channels during the first
installation, you see the message
‘no channels found’ or some
channels are missing from the
channel list.
The P+ and P- buttons do not work.
▲ ▼ buttons do not work in the on-
screen TV guide.
Pressing TV/DTV does not switch
between a digital channel and an
analogue channel.
A small red circle or square appears
on the screen, or your picture is
‘freezing’.
Possible causes
Mains cable is not connected.
The Mediamaster is in standby.
Signal too weak.
The Mediamaster is not set in
digital TV mode.
The SCART connection has been
made wrong or your TV has not
selected the correct AV/EXT
channel.
The aerial is not properly connected
to the Mediamaster.
The aerial is not pointing in the right
direction.
The aerial is not suitable for digital
channels.
The indoor aerial is not enough.
There are no digital transmission.
The Mediamaster is in favourites
mode and you have not set any
favourites channels.
The system is not connected by
SCART leads.
The system is SCART connected
but the TV is tuned to its channel
for digital terrestrial TV.
The digital signal is weak or
missing.
The aerial may not be suitable.
There could be a transmission
problem.
Your connecting cables have
become loose or disconnected.
What to do
Check that the mains cable is
plugged into the power socket.
Press the standby button or any
number button to bring the
Mediamaster out of standby.
Check if the aerial works for
analogue reception.
If your system is connected by
SCART leads, press TV/DTV. If this
not does work, set the TV to its
appropriate AV input.
If your system is connected only
by RF leads, set your TV to that
channel you have tuned for digital
terrestrial TV.
Check SCART connections, making
sure leads are firmly pushed into
the sockets. Try manually selecting
the AV/EXT channel on your TV.
Check the aerial connector and the
aerial installation.
Check if you can see the analogue
channels.
Check that the aerial is pointing in
the right direction.
Check that the digital transmission
are available in the area.
Set up some favourites or take the
Mediamaster out of favourites
mode.
The TV/DTV button will only work
for SCART connected systems.
Contact ITV Digital Customer
Services. They may ask you to
check the signal strength menu.
This is normally only a temporary
situation and should correct itself.
If it persists, contact ITV Digital
Customer Services.
Check all connections and make
sure they are firmly pushed into
sockets.
Trouble shooting guide
GB 30
Customer Services
0808 100 0101
Trouble shooting guide
Possible causes
The Mediamaster was unplugged
without first going to standby.
You have entered in a channel
number which currently has no
channel associated with it.
The signal to your aerial may be
weak.
Your aerial may need adjusting or
your local transmitter may not be
working.
Your Mediamaster is interfering
with the frequency of your other
equipment.
If you have connected using SCART
and you have an RGB compatible
TV, one of the tv settings should be
wrong.
Your ITV Digital subscription does
not currently include these
channels.
They have been re-arranged as
described in this manual.
The broadcast is probably in
widescreen and the Mediamaster
settings may not be correct.
The video was set incorrectly.
Your Mediamaster was not left in
standby.
You were watching another digital
channel and ignored the timer
alarm.
The timer automatically adds 5
minutes to the start and end times
set in the timer. If the 2
nd
programme starts immediately
after the first, this can delay the
start of the second recording.
Problem
The settings you have done in the
menus have not been changed.
You see a on-screen message
‘no channel on this number’.
You can’t find all the channels you
think should be available.
You can see interference on your
normal TV channels or your video.
The on-screen displays are not as
sharp as I expected.
There is no picture on certain
channels but the channel name is
displayed.
The order of my channels has
changed.
The picture on some channels
seems to have been stretched or
squashed.
I set the timer but it didn’t record
what I wanted.
When I have more than 1 pro-
gramme in the timer, I sometimes
miss the beginning of the second
programme.
What to do
Some menus are only saved
permanently when you first put the
Mediamaster in standby. Put the
Mediamaster in standby after you
have changed something in the
menus.
Select another channel number.
Try retuning your Mediamaster,
following the relevant steps in this
manual. If you are still missing
channels, your aerial may need
adjusting.
Contact ITV Digital Customer
Services. They will check this for
you.
You need to change the UHF
output of the Mediamaster.
Refer to the relevant section in this
manual and alter the TV standard
to RGB.
To add channels to your subscrip-
tion, contact ITV Digital Customer
Services.
Refer to the relevant section in this
manual to change the order again.
Check the Mediamaster settings. If
you have a widescreen TV, you
may also need to check the
settings on your TV.
Make sure that your video is set for
the same time as your
Mediamaster.
If you set the timer and have
finished watching TV, make sure
you put your Mediamaster into
standby, otherwise it will not
activate.
If you set the timer and continued
watching, you must change to the
timer channel when the alarm
activates.
Only set the timer for the exact
time of the programme. Allow for
the 5 minutes run in and out times
when setting more than one event.
GB 31
Customer Services
0808 100 0101
Trouble shooting guide
Front panel display
Channel number
The Mediamaster is in
standby
There is an unread post
message in the postbox
The timer alarm
(flashing)
RF channel
rEc
Pressing a button on the
remote
The Mediamaster
is in record mode
rEd
P0SE
Problem
The remote is not working.
You see the on-screen message
‘insert smartcard’.
You have forgotten your parental
code.
Possible causes
Battery exhausted.
Remote is incorrectly
aimed.
The Mediamaster is in standby.
An incorrect code has been entered
into the remote.
The Mediamaster can’t recognise
your smartcard.
What to do
Change the batteries.
Aim the remote at Mediamaster.
Check that nothing blocks the front
panel.
Check if (:) is flashing on the front
panel display when you press a
button. If not replace the batteries .
Refer to the relevant section of this
book to make sure that the right
codes are being used for your
other equipment.
Check that you are using the
proper smartcard. Check that the
smartcard has been correctly
inserted. If the problem persists,
you may have a problem with the
card.
Contact ITV Digital Customer
Services.
Contact ITV Digital Customer
Services. They will help you set it
up again.
What to do if you can’t solve the problem
If you have tried all of the actions suggested above, without solving the problem, please contact
ITV Digital Customer Services 0808 100 0101
GB 32
Customer Services
0808 100 0101
Transmission Standards
DVB, MPEG 2
RF input (OFDM)/Modulator output
Loop through output
Input/output connector IEC female / IEC male
RF input frequency 470 to 862 MHz
RF input power level 35 to 80 dB µV
RF impedance 75
Frequency range Loop through 47 to 862MHz
Frequency range Re-modulator 470 to 862 MHz
Output channel UHF CH 21-69
Preset channel 21
Output signal PAL I
TV SCART
Video output 1 V
pp
(±1 dB) / 75
Audio output 0,5 V
rms
/ R
L
>10 k
RGB output Internal RGB
RGB bandwidth 5,8 MHz ±3 dB
Fast blanking output Internal RGB
Status output 0/6/12 V / R
L
10 k
AUX SCART
Video output 1 V
pp
(±1 dB) / 75
Video input 1 V
pp
/ 75
Audio output 0,5 V
rms
/ R
L
>10 k
Audio input 0,5 Vr
ms
/ R
L
>10 k
Status input 0/6/12 V / R
L
>10 k
DIGITAL AUDIO (S/PDIF)
Connector 1 x RCA
AUDIO R L
Connector 2 x RCA (R+L)
Output 0,5 V
rms
± 0,5 dB/ R
L
10 k
SERIAL (RS 232) Low speed serial data
Connector 9-pin D-sub
Signals Full duplex data, max. 115,2 kbit/s
Pin 1 DCD (Data carrier detect) not connected
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (Data terminal ready) Set to high
5 GND (Signal ground)
6 DSR (Data set ready) not connected
7 RTS (Ready to send)
8 CTS (Clear to send)
9 RI (Ring indicator) not connected
MODEM Return channel, Telephone line
Connector Modular jack 6-pin
Protocol V22 bis, 2400 baud
Conditional access system:
Embedded Mediaguard and PCMCIA interface
for the Common Interface CA-module (DVB
Standard)
Smartcard Interface:
Interface for one card according to ISO 7816
Support embedded descrambler (Mediaguard)
Front panel Display 4x7 segment alphanumeric LED display,
Buttons: , SELECT, RESET, MENU
General data
Article code The model code, variant and serial number,
are located on a label on the underside of
the housing.
Supply voltage 230 V AC ± 15%, 50-60 Hz
Power consumption max 24 W
Power consumption in
standby 5 W
Operating temperature +5° C to +45° C
Storage temperature - 40° C to +65° C
Humidity 25 to 75 % rel humidity
Operating distance for
remote max 10 meters
Dimensions (w x d x h) 380 x 240 x 65 mm
Weight 1,9 kg approx
SCART-sockets
TV AUX
1 Audio out right ch. Audio out right ch.
2 - Audio in right ch.
3 Audio out left ch. Audio out left ch.
4 Audio ground Audio ground
5 RGB blue ground RGB blue ground
6- Audio in left ch.
7 RGB blue signal out RGB blue signal in
8 Switch voltage out Switch voltage in
9 RGB green ground RGB green ground
10 Connect to pin 10 in AUX scart
11 RGB green signal out RGB green signal in
12 - -
13 RGB red ground RGB red ground
14 Fast blank. ground Fast blank. ground
15 RGB red signal out RGB red signal in
16 Fast blanking out Fast blanking in
17 Video out ground Video out ground
18 - Video in ground
19 Video out Video out
20 - Video in
21 Ground (casing) Ground (casing)
The EMC Directive 89/336/EEC is applied to this product.
121
220
Technical specifications
GB 33
Customer Services
0808 100 0101
ONsetup
1 setting the timer
2 choosing favourite channels
3 parental lock
4viewing preferences
5 getting started
6 updates
7technical information
main menu
ONsetup
welcome
ONsetup
1 setting the timer
2 choosing favourite channels
3 parental lock
4viewing preferences
5 getting started
6 updates
7 technical information
main menu
Press select on your remote to
get started
Menu screen structure
Main Menu
First time installation
Press SELECT
First power on
1
2
3
4
5
6
7
ONsetup
1 enter new parental code
2 choose channel to lock or unlock
parental lock
enter parental lock
confirm your code
back
select
+ + + +
ONsetup
1 enter new parental code
2 choose channel to lock or unlock
parental lock
ONsetup
1 set top box settings
2tv and video settings
3 modem setting
viewing preferences
ONsetup
1 channel list
2 change channel numbers
3 add channels
4store channels
getting started
ONsetup
1 smartcard data
2 check your postbox
digital box updates
ONsetup
modem 1 internal
dialing 2 pulse
connection 3 direct
prefix 4 0
wait for dial tone 5 yes
regional code 6 no
modem settings
ONsetup
1 preferred language english
2 subtitles none
3 tv volume
4info display time normal
5timer alarm visual +audio
6 date and time 12:30
set top box settings
ONsetup
Your set top box is now searching
for all available channels.
This may take about 20 minutes.
Please wait.
add channels
number of channels found 9
%
0 25 50 75 100
ONsetup
Your set top box is now searching
for all available channels.
This may take about 20 minutes.
Please wait.
store channels
number of channels found 13
%
0 25 50 75 100
ONsetup
signal strength
uhf channel number
signal strength
good
satisfactory
poor
21 21 69
1 2 3 4
ONsetup
1signal strength
2 manufacturer data
3 auto update
technical information
ONsetup
postbox
New channels
Watch out for new channels.
Contact ITV Digital
Call ITV Digital Customer
Service on 0870 600 9696
1
1
1
1
2
2
1
2
2
2
3
3
3
4
1 - 8
ONsetup
setting the timer
date 02.02
channel or
start time ++ ++
end time ++ ++
recording repeat once only
DON’T FORGET TO PROGRAM YOUR VIDEO
ONsetup
ONsetup
1tv screen normal (4:3)
normal (4:3) full screen
2tv sound mono
3tv standard composite
4video sound stereo
5video standard pal I
6 output channel 21 21 69
tv and video settings
ONsetup
setting the timer
1 08.02 BBC 1 15.30 16.30
2 09.02 ITV 08.30 09.30
3 09.02 BBC 1 11.45 12.30
4 available
5 available
6 available
7 available
8 available
DON’T FORGET TO PROGRAM YOUR VIDEO
ONsetup
technical information
manufacturer data
manufacturer Nokia
hardware version 00 00 03 07
software version 00 00 02 09
manufacturer update 00 00 00 00
api version 00 28 a0 04
run version 00 07 0300
run update version 00 00 00 00
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
setup
ONsetup
smartcard data
15 DEC 99
subscription end on
setup
lock or unlock
1 BBC ONE
2 BBC TWO
3ITV
4 CHANNEL 4
5 CHANNEL 5
6ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9 TELETEXT
channels are locked
setup
ONsetup
favourite channels
1 BBC ONE
2 BBC TWO
3ITV
4 CHANNEL 4
5 CHANNEL 5
6ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9 TELETEXT
favourites are on
setup
on setup
ONsetup
1 BBC ONE
2 BBC TWO
3ITV
4 CHANNEL 4
5 CHANNEL 5
6 ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9TELETEXT
channel list
setup
ONsetup
1 BBC ONE
2 BBC TWO
3ITV
4 CHANNEL 4
5 CHANNEL 5
6 ITV 2
7 BBC CHOICE
8 BBC NEWS 24
9TELETEXT
change channel
numbers
setup
ONsetup
1 enter new parental code
2 choose channel to lock or unlock
auto update
do you really want
to start a download
to update your
set top box?
technical information
setup
Hereby, Nokia declares that this digital receiver 9850 T is in conformity with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
This Terminal Equipment is intended for connection to the analogue Public
Switched Telephone Networks (PSTNs), in which network addressing , if provided,
is by means of Dual Tone Multiple-Frequency (DTMF) signalling.
This equipment has been approved pursuant to Council Decision 98/482/EC [CTR
21] for pan-European single terminal connection to the Public Switched telephone
Network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN termination point.
In the event of problems, you sholud contact your equipment supplier in the first
instance.
66 76928-22
© 0214
44 10285
230 V
±15%
50 Hz
WARNING!
DO NOT OPEN –
ELECTRICAL
SHOCK HAZARD
DIGITAL AUDIO
AUDIO
R
L
TV AERIAL
TELEPHONE
SERIAL
AUX
TV
TV / VCR
Nokia is a registered trademark of Nokia Corporation
www.nokia.com
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nokia Mediamaster Free-to-View bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nokia Mediamaster Free-to-View in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info