Handleiding Nokia E61 (pagina 84 van 100) (Engels)

36272

Verklein

Vergroot

Pagina terug

1/100

Pagina verder

• Internet call alert — Set this on if you want the device to respond to the caller that it is busy. If you set this off, the device

emits a busy tone to the caller and you receive a notification about the missed call.

• Default call type — Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or

address.

• Reject call with SMS — Select Yes to send a text message automatically to the person who is calling you informing why you

cannot answer their incoming call.

• Message text — Enter the text that is sent when you cannot answer an incoming call and want to automatically send a text

message as a reply.

• Image in video call — Select Use selected to select a still image to be displayed instead of a video during a video call or

None to not send any image during a video call.

• Automatic redial — Select On to redial a number if it was busy at the first call attempt. Your device makes a maximum of 10

attempts to connect the call.

• Summary after call — Select On to briefly display the approximate duration of the last call.

• Speed dialling — Select On to activate speed dialing on your device. To dial a phone number assigned to the speed dialing

keys (2-9), press and hold the key.

See "Speed dial," p. 33.

• Anykey answer — Select On to answer an incoming call by briefly pressing any key, except the end key.

• Line in use — Select Line 1 or Line 2 to change the phone line for outgoing calls and text messages (network service). This

setting is displayed only if the SIM card supports the alternate line service and a subscription to two phone lines.

• Line change — Select Disable to prevent line selection (network service). To change this setting, you need the PIN2 code.

• Internet call alert — Select Off to notify incoming net calls that your device is busy or On to accept incoming net calls.

Connection settings

Select Menu > Tools > Settings > Connection and from the following:

• Access points — Set up new or edit existing access points. Some or all access points may be preset for your device by your

service provider, and you may not be able to create, edit, or remove them.

• Access point groups — Set up new or edit existing access point groups that are used in automatic connection establishment

and e-mail roaming.

• Packet data — Determine when packet data connections are used, and enter the access point if you use your device as a

modem for a computer.

• Internet tel. settings — Define settings for net calls.

• SIP settings — View or create session initiation protocol (SIP) profiles.

• Data call — Set the time-out period after which data call connections automatically end.

• VPN — Install and manage VPN policies, manage VPN policy servers, see the VPN log, and create and manage VPN access

points.

• Wireless LAN — Determine if the device displays an indicator when a wireless LAN is available, and how often the device

searches for networks.

• Configurations — View and delete trusted servers from which your device may receive configuration settings.

To obtain information about wireless LAN or subscribing to a packet data service and the appropriate connection and

configuration settings, contact your network operator or service provider.

The settings available for editing may vary.

Access points

Select Menu > Tools > Settings > Connection > Access points.

An access point is where your device connects to the network by way of a data connection. To use e-mail and multimedia services

or to browse web pages, you must first define access points for these services.

An access point group is used for grouping and prioritizing access points. An application can use a group as a connection method

instead of a single access point. In that case, the best available access point inside a group is used for making the connection,

and in case of e-mail, also for roaming.

Some or all access points may be preset for your device by your service provider, and you may not be able to create, edit, or

remove them.

See "Internet access points," p. 44.

Access point groups

Select Menu > Tools > Settings > Connection > Access point groups.

An access point group is used for grouping and prioritizing access points. An application can use a group as a connection method

instead of a single access point. In that case the best available access point inside a group is used for making connection and

in case of e-mail, also for roaming. See "Access point groups," p. 52.

S e t t i n g s

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Nokia E61 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Nokia E61

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info