297910
82
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
10-6 Fax modem
1998 Nokia Mobile Phones. All Rights Reserved.
Fax modem
Before your computer can recognise the commu-
nicator as a fax modem, the computer needs to
be properly configured. Consult the user’s guide
of your computer on how to install new modems.
Computers with Microsoft Windows 95 or NT
3.51 (or higher) operating systems can use the
modem information file found on the Nokia
Communicator Server diskette. See also the re-
adme.txt file on the diskette.
Using the communicator as a fax modem re-
quires that data calls are supported by the net-
work you are using and that this service is
activated for your SIM card. If you want to re-
ceive data calls, your SIM card also needs a data
number. Contact your home service provider for
details.
1 Connect the communicator to the PC via an
infrared link as described in ”Connecting to a
PC” on page 10-5.
2 Wait until the connection is established.
3 Press Activate in the Fax modem main view.
This will change the communicator to a fax
modem. When the communicator is used as a
fax modem, the call status indicator shows
the text MODEM.
4 To stop using communicator as a fax modem,
press Disable.
Operations of a modem can be controlled by AT
commands and S-registers. These commands
give the advanced user an opportunity to control
all the features of the modem. However, it is not
always necessary to enter the AT commands
manually. Most PC communications applications
have a user-friendly interface that hides the AT
commands from the user. Should you need to en-
ter the commands manually, consult the docu-
mentation of the PC application that you are
using. A list of the common AT commands (based
on the ETSI 07.07 standard) supported by the No-
kia 9000i Communicator are available as an AS-
CII text file on the diskette that came with the
sales package of your communicator.
When the communicator is used as a fax modem,
its normal communication features are disabled
(otherwise, the applications remain functional).
If an active PC connection is idle for longer than
20 minutes, the fax modem mode is automati-
cally disabled to conserve power. However, when
the communicator is connected to an electrical
outlet (for example, while charging a battery),
the time-out is not active.
To change the Fax modem settings, press Set-
tings and select:
Connection type — Infrared (recommended)/
Cable. The cable connection is intended for
use with the communicator’s own PC connec-
tivity applications for backup, file transfer,
export/import and software installation pur-
poses. The functionality of a cable connection
when the communicator is used as a fax mo-
dem is not guaranteed.
File transfer
To select the serial connection type (infrared or
cable) and the PC drive used, press Settings in
File transfer application’s main view.
To connect to a PC:
1 Make sure that the connectivity software has
been installed on your PC and is running (see
”Connecting to a PC” on page 10-5).
2 Press Connect to PC in the File transfer main
view.
When you are connected to a PC, there are two
system windows on the communicator interface
display. The left window shows the folders on the
communicator (the same folders as seen in the
Notes main view) and the right window shows
82

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nokia 9000i bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nokia 9000i in de taal/talen: Engels als bijlage per email.

De handleiding is 3,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Nokia 9000i

Nokia 9000i Gebruiksaanwijzing - Deutsch - 150 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info