751121
22
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
setup process.
Channel Skip: Select the channels to be skipped when switching channels using the Programme +/- buttons
on the remote control. Highlight the desired channels in the list and press OK to select them.
Channel Swap: Swap the position of two selected channels in the channel list. Highlight the desired channel
in the list and press OK. Select the second desired channel and swap the position of these two channels. You
should set the LCN option to O or Default to enable this feature.
Channel Move: Move a channel to the position of another one. Highlight the channel you want to move and
press OK. Highlight the second channel and it will be moved to the position of the rst channel. You should
set the LCN option to O or Default to enable this feature.
Channel Edit: Edit channels in the channel list. Edit the name and the channel number of the
selected channel and display information about Network Name, Frequency, Colour System, Sound System,
Modulation and Symbol Rate. Depending on the channel other options may also be editable. You can press
the Blue button to delete the highlighted channel.
Analogue Channel Fine-tune: Fine-tune an analogue channel. A list of available
analogue channels will be displayed. Select the desired channel from the list and press OK. Then change the
frequency of the channel by pressing Left/Right directional buttons. Press OK to store the new frequency
for that channel. Press Back to cancel. This item may not be visible, depending on whether the last watched
channel was analogue or not.
Clear Channel List: Delete all channels stored in the channel list of the selected channel installation
mode. A dialogue will be displayed for conrmation. Highlight OK and press OK to proceed. Highlight Cancel
and press OK to cancel the deletion process.
Note: Some options may not be available and appear as grayed out depending on the operator selection and
operator related settings.
10.2.3. Channel installation Mode-Preferred Satellite
Satellite Re-scan: The satellite search process will be performed again.
Satellite Add: This function is useful when the General Satellite option is selected as the TV signal type.
When the Preferred Satellite option is selected, DiSEqC settings will be automatically determined and
channels from new satellite providers will be added from new selected satellites, depending on the selected
satellite provider.
Satellite Update: If you select the Scan function, the receivable satellites and the corresponding DiSEqC
settings will be determined automatically and the new channels will be added.
Satellite Manual Tuning: Select the satellite on which you want to perform the manual search of the
satellite transponder and press OK. Set the exact reception parameters of the desired satellite transponder
(frequency, symbol rate and polarization). Make sure that the signal quality and signal level indicate a
sucient value and press the Back button. Press the Right directional button to start the search. The
found programs will be saved at the end of the program list.
Channel Skip: Select the channels to be skipped when switching channels using the Programme +/- buttons
on the remote control. Highlight the desired channels in the list and press OK to select them.
Channel Swap: Swap the position of two selected channels in the channel list. Highlight the desired channel
in the list and press OK. Select the second desired channel and swap the position of these two channels. You
should set the LCN option to O or Default to enable this feature.
Channel Move: This function is partially available in the “Preferred Satellite” satellite installation mode. The
channel list of the selected providers cannot be edited.
Channel Edit: Edit channels in the channel list. Edit the name and the channel number of the selected
channel and display information about Network Name, Frequency, Colour System, Sound System,
Modulation and Symbol Rate. Depending on the channel other options may also be editable. You can press
the Blue button to delete the highlighted channel.
Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode.
A dialogue will be displayed for conrmation. Highlight OK and press OK to proceed. Highlight Cancel and
press OK to cancel the deletion process.
10.2.4. Channel installation Mode-General Satellite
Satellite Re-scan: The satellite search process will be performed again. As an option, you can activate
another receivable satellite and add it to the automatic search. Select another satellite and press OK.
Set the exact reception parameters of the desired satellite, the DiSEqC connections and the reception
parameters of a receivable satellite transponder (the frequency, the symbol rate and the polarization). Make
sure that the signal quality and signal level indicate a sucient value and press the Back button. Press the
22
22

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Nokia-5000A

Zoeken resetten

  • hallo ik heb een nokia smart tv 50" 126 4k uhd maar ik krijg de sokkel niet in elkaar kan iemand me advies geven hoe ik deze moet ineen steken

    dank u Gesteld op 18-6-2024 om 20:50

    Reageer op deze vraag Misbruik melden
  • Is er een Nederlandse versie voor de gebruikershandleiding van TV NOKIA 5000A Gesteld op 7-1-2022 om 03:09

    Reageer op deze vraag Misbruik melden
  • Is er ook een nederlandse gebruikershandleiding voor NOKIA TV 5000A Gesteld op 7-1-2022 om 03:05

    Reageer op deze vraag Misbruik melden
  • Mijn beeldscherm gaat regelmatig zomaar spontaan uit.. en meestal tot 2 x aantoe moet ik hem dan weer opnieuw opstarten.. wat kan ik hier aan doen of waar ligt dit aan? Groetjes Gesteld op 4-1-2022 om 18:47

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nokia 5000A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nokia 5000A in de taal/talen: Engels als bijlage per email.

De handleiding is 1,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Nokia 5000A

Nokia 5000A Gebruiksaanwijzing - Nederlands - 46 pagina's

Nokia 5000A Gebruiksaanwijzing - Deutsch - 43 pagina's

Nokia 5000A Gebruiksaanwijzing - Français - 47 pagina's

Nokia 5000A Installatiehandleiding - Alle talen - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info