22
Symbol 18, ‘Descale’, flashes
during the whole descaling
operation.
Please follow the instructions in
the exact order given below:
➔ Please switch the machine to
Stand-by mode.
➔ Press and hold the Stand-by
button and 2-cup button simul -
taneously for about 4 seconds.
➔ Symbol 17 ‘Empty trays’ lights
up and Symbol 18 ‘Descale’ con -
tinues to flash.
➔ Remove the drip tray and used
coffee tray (fig. 1/J) and clean
thoroughly.
➔ Replace the drip tray and used
coffee tray.
➔ Symbol 13 ‘Fill water reservoir’
and the 1-cup button flash.
➔ First remove and fill the water
reservoir with fresh water up to
the 0.5 l mark. Replace the water
reservoir in the machine.
➔ Then add the descaling agent
to the water (never the other way
round – please note the manu -
facturer’s instructions).
➔ Now press the flashing 1-cup
button.
➔ The machine starts the des -
caling program (water flows in).
➔ The first stage of the descaling
program lasts about 12 minutes.
➔ Symbol 16 ‘hot water / steam,
open / closed’ flashes.
➔ Now place a fairly large container
(about 0.5 l) under the steam / hot
water jet.
➔ Turn the steam / hot water valve
control knob right to open.
➔ The second stage of the des -
caling program starts and runs for
about 10 minutes.
➔ As soon as the cycle is com -
pleted, Symbol 17 ‘Empty used
coffee tray / drip tray’ lights up.
➔ Remove, empty and replace the
drip tray.
➔ Symbol 13 ‘fill water tank’ and
the 1-cup button both flash.
➔ Remove and clean the water
reservoir and fill it up with fresh
water.
➔ Replace the water reservoir.
➔ Now place a fairly large container
(about 0.5 l) under the steam / hot
water jet.
➔ Press the flashing 1-cup button.
➔ The rinsing operation via the hot
water jet begins.
➔ When the rinsing operation is
completed, Symbol 16 ‘hot water /
steam, open / closed’ flashes.
➔ Turn the hot water / steam knob
to the left to close.
... 5. Maintenance and care
