Your machine now begins preparing the froth.
The “Stop foam?” message appears on the display.
£ Press the Right rotary knob when the correct amount of froth has been prepared.
The standard setting for your warm milk has now been altered and saved. The “Recipe Created” mes-
sage appears briey on the display, followed by the rst menu level showing the new standard settings.
b) Manual Programming
The standard settings can also be altered manually, as follows:
£ Turn the Right rotary knob to “Setting”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “Setting Recipe”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “Recipe Milk”. Now press the Right rotary knob.
£ Selecting the amount of milk
£ Turn the Right rotary knob to “Milk”. Now press the Right rotary knob.
£ Turn the Right rotary knob to the amount required (between 20 and 240 ml). Press the Right
rotary knob to conrm your setting.
Important note: Check the size of your cups or glasses.
£ Selecting the amount of froth
£ Turn the Right rotary knob to “Foam”. Now press the Right rotary knob.
£ Turn the Right rotary knob to the amount required (between 20 and 240 ml). Press the Right
rotary knob to conrm your setting.
Important note: Check the size of your cups or glasses.
£ In order to get out of a menu, turn the Right rotary knob to “Exit”. Now press the Right rotary
knob.
£ Repeating the process returns you to the rst menu level (only one row of the menu is shown on
the display).
Note: If no menu alterations are made, the machine will eventually return you automatically to the rst
menu level.
4.5.2 Preparing warm milk to individual taste
Your machine allows you to prepare each warm milk to your individual taste, independent of the stand-
ard settings in the “Setting Recipe” menu.
£ In the main menu, turn the Right rotary knob to “Milk”.
£ Turn the Left rotary knob to alter the amount of your hot milk (in ml). When altering the amount of
hot milk, the proportion of milk to froth remains unchanged.
Note: Your machine cannot be programmed to prepare more than one cup or glass of any drink contain-
ing milk.
£ Place your cup or glass centrally under the spout (Fig 5).
£ Begin the preparation process by pressing the Right rotary knob.
Note: If you began preparation too early, or have made a selection error, you can still change some of
the parameters whilst your drink is being prepared. These parameters are shown on the bottom row of
the display. Whilst they are ashing, you still have time to alter them.
£ Turn the Right rotary knob to the required setting.
On your display, the “ml. symbol” will ash (rst for the amount of milk, then for the amount of froth).
You are still able to alter these parameters, whilst they are ashing.
£ If you wish to stop preparation of your drink, press the Right rotary knob.
The “Brewing aborted” message then appears on the display.
4.6 Prepare “My coffee” (only Model 767)
You can use your machine to make coffee completely according to your own preferences, indepen-
dently of all other standard settings.
The standard factory settings for “My coffee” are: Latte Macchiato, Volume 300ml, Aroma “normal”.
The display shows “My coffee”.
You can prepare “My coffee” in two different ways:
1. You can select the standard settings from the “Recipe” menu. These are your machine’s factory set-
tings. However, you can change these settings, as described below.
2. Or you can change the setting to suit your personal taste whilst making your individual preparation.
The standard settings then remain unchanged.
4.6.1 Preparing “My coffee” using standard settings
£ Place a cup under the spout (Fig 5).
£ Turn the Right rotary knob to “My coffee”. Now press the Right rotary knob.
This illuminates your cup (Model 767). Your machine will now prepare a cup of “My coffee” using the
standard settings.
You can alter the standard settings in one of two ways, as follows:
a) Live Programming
The standard settings can be altered (and the new settings saved) whilst your milk is being prepared,
as follows:
£ Turn the Right rotary knob to “Setting”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “Setting Recipe”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “Recipe My coffee”. Now press the Right rotary knob.
“My Coffee” and the name of the drinks currently saved will appear in the display.
£ Now press the Right rotary knob. Turn the right rotary knob to select your required drink.
£ Now press the Right rotary knob to conrm your drink selection.
£ Turn the Right rotary knob to “Start live Prog.“.
£ To alter the standard settings, press the Right rotary knob.
To set your required parameters, please follow the same process as described for the respective drink
(see Point 4.1.1 to 4.5.1 Live Programming).
b) Manual Programming
The standard settings can also be altered manually, as follows:
£ Turn the Right rotary knob to “Setting”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “Recipe”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “My coffee”. Now press the Right rotary knob.
“My Coffee” and the name of the drinks currently saved will appear in the display.
£ Now press the Right rotary knob. Turn the right rotary knob to select your required drink.
£ Now press the Right rotary knob to conrm your drink selection.
Turn the right rotary knob to show the setting options for the selected drink in the display.
To set your required parameters, please follow the same process as described for the respective drink
(see Point 4.1.1 to 4.5.1 Manual Programming).
4.6.2 Preparing “My coffee” to individual taste
Your machine allows you to prepare each “My coffee” to your individual taste, independent of the
standard settings in the “Setting Recipe” menu.
28 29
4. Preparing speciality coffees 4. Preparing speciality coffees
