The appliance starts the cleaning process. The display shows “CLEANING SYSTEM”. The process is
fully automated and takes approximately 10 minutes.
Note: Should a message appear during the cleaning process, follow the indicated steps. The appliance
will continue with the cleaning automatically afterwards.
Once the cleaning process is nished, the display shows “EMPTY TRAYS“
Remove the drip tray and the used coffee container (g. 1/N and 1/O) and reinsert them both
when cleaned.
If necessary rell the water tank with fresh water.
The appliance reheats and is again ready for use. The display shows the main menu.
5.5. Descaling
If the appliance needs descaling, the display shows “PLEASE DESCALE SYSTEM”.
You can also start the descaling programme manually at any time.
Attention: Please make sure to follow each step exactly as outlined below! You can continue making cof-
fee, but we recommend starting the descaling programme as soon as possible. Otherwise your warranty
could be compromised.
Attention: Do not disrupt the descaling programme. Never use vinegar or vinegar-based agents, but only
standard liquid products specically recommended for automatic coffee machines.
Attention: Before starting the descaling programme remove the lter from the water tank.
Turn the right rotary control to “MAINTENANCE” and press it.
Turn the right rotary control to “DESCALING SYSTEM” and press it.
The display shows “EMPTY TRAYS”.
Remove the drip tray and the used coffee container (g. 1/N and 1/O), and empty both.
Reinsert the drip tray and used coffee container.
The display shows “REMOVE WATER TANK”.
Remove the water tank
The display alternately shows
“FILL WATER TANK TO 0.5 L MARK” and “INSERT DESCALER AND ADD TANK”.
Remove the lter. Fill the water tank to the 0.5 l mark with fresh water and reinsert it.
Attention: Always add water rst to the 0.5 l mark and then the descaling agent. Never vice versa! Please
follow the manufacturer’s instructions on how to use the descaler.
Only now add the descaler.
The display shows “HOSE ON SPOUT AND IN DRIP TRAY”.
Connect one end of the hose to the height-adjustable spout (g. 7).
Connect the other end of the hose to the back of the drip tray on the right (g. 10).
Press the right rotary control.
The display shows “START DESCALING”.
Place a sufciently large bowl (at least 0.5 l) underneath the spout (g. 1/E).
Press the right rotary control.
The appliance starts the descaling process. The display shows “SYSTEM DESCALING, DO NOT REMOVE
HOSE”. The descaling process is automatic and takes approximately 30 minutes. The descaling solution
is passed at intervals through the system.
Once the cycle is completed, the display shows “EMPTY TRAYS”.
Remove the drip tray and the used coffee container (g. 1/N and 1/O) and empty both.
Reinsert the drip tray and used coffee container.
Remove water tank and rinse it with fresh water.
Reinsert lter into the water tank if required.
Fill the water tank with fresh water and reinsert it.
The display shows “HOSE ON SPOUT AND IN DRIP TRAY”.
Connect the hose with one end to the height-adjustable spout (g. 7).
Connect the other end of the hose to the back of the drip tray on the right (g. 10).
Place a sufciently large bowl (at least 0.5 l) underneath the spout (g. 1/E).
Press the right rotary control.
The display shows “PLEASE RINSE”.
Press the right rotary control to start the rinsing process.
The display shows “SYSTEM RINSING, DO NOT REMOVE HOSE”. The automatic cleaning process
is started and lasts for approximately three minutes. Once the cycle is nished, the display shows
“EMPTY TRAYS”.
Empty drip tray and used coffee container (g. 1/N and 1/O) and reinsert both.
The appliance reheats and is ready for use. The display shows the main menu.
Attention: Please immediately remove any descaler residues from the casing with a damp cloth.
5.6. Regular manual cleaning
Note: Please follow these cleaning instructions. Working with foodstuffs demands the highest stand-
ards of cleanliness.
Attention: Never immerse the appliance in water! Do not use abrasive cleaning agents.
Only use a soft, damp cloth without any detergent for cleaning the casing inside and out.
Empty the drip tray (g. 1/N) and used coffee container (g. 1/O) at the latest when this is
indicated on the display (only when the appliance is switched on because only then can the ap-
pliance register that the trays have been emptied).
Note: Occasionally use a little soapy water when cleaning the drip tray (g. 1/N).
The water tank should be rinsed daily with clear water and then be re-lled daily with fresh cool
water.
Note: Dried milk residue is difcult to remove.
Therefore clean frother, hose and spout regularly.
Note: From time to time (ideally when the appliance will not be used for a while, but at any rate at
regular intervals!) the frother needs to be completely dismantled and thoroughly cleaned under running
water.
Remove the cover (g. 1/P) at the bottom of the height-adjustable spout.
Pull the frother down and out (g. 11) and dismantle it completely (g. 1/R).
Clean the components (g. 1/R) thoroughly and reassemble the frother.
Reinsert the assembled frother into the height-adjustable spout (g. 11).
Replace the cover on the height-adjustable spout (g. 1/P)
Note: Your appliance is equipped with back rollers (g. 1/Q). They allow you to move the appliance on
a at working top. This way, you can also clean the space underneath the appliance.
5.7. Cleaning the brew unit
Attention: Remove the brew unit only when the appliance is switched off.
Attention: Clean the brew unit after each cleaning cycle, but at least once a month. Otherwise your war-
ranty could be compromised.
When necessary the brew unit can be removed and cleaned under cold, running water. Never use
84 85
5. Cleaning and maintenance 5. Cleaning and maintenance
