Note: Pay attention if you prepare one or two cups and place the cups accordingly under the spout
(g. 5 and 6).
Note: Should you have initiated the brewing process accidentally or too early, it is possible to change
a few parameters while making the coffee. A blinking display will show you which.
While the symbol blinks, turn the rotary control onto the required setting.
First the bean symbol for the aroma will blink, then the ml-indicator for the volume.
This way you can intervene at any given time.
If you want to stop the process, simply press the rotary control once or touch “ABORT”.
The display shows “ABORTED”. The appliance cancels the process and returns to main menu.
4.2 Adjusting standard settings for drinks without milk (ESPRESSO, COFFEE, CAFFÈ AMERICANO)
Ex-factory the standard setting is
• for Espresso: standard strength, quantity 40ml, aroma prole “INTENSE”,
the display shows “40ml ooo lll”
• for coffee: standard strength, quantity 120ml, aroma prole “DYNAMIC”,
the display shows “120ml ooo l”
• for Caffè Americano: standard strength, quantity 120ml, aroma prole “CONSTANT”,
the display shows “120ml ooo lI”.
The following instructions apply when the ex-factory is set as “OFF” (see 3.7.5.) under “QUICK
START” in the menu “COMFORT SETTINGS”.
Place a cup underneath the spout (g. 5).
Turn the rotary control to the drink of your choice (e.g. Espresso) and press it or touch the
required drink.
Note: In the bottom line the display shows the current settings of the chosen coffee speciality. Volume
on the left, strength in the centre and aroma prole on the right.
Note: Pay attention if you prepare one or two cups and place the cups accordingly under the spout
(g. 5 and 6).
Turn the rotary control until the display turns blue on the required setting and press it.
Turn the rotary control to change the setting and press it to conrm.
Note: This way you can change all settings shown in the display’s top line before you brew your drink.
Start the brewing process by pressing the rotary control or touch “START”.
The cup light is switched on and the appliance prepares a cup of your selected drink in the standard
setting.
Brewing two cups
To brew two cups one directly after the other press the rotary control immediately after the start
of the process or touch the cup symbol below centre.
The display shows numbers “1“ or “2“ in the centre below.
If you want to stop the process, simply press the rotary control again.
The display shows “ABORTED”. The appliance cancels the process and returns to the main menu.
The standard setting can be altered in two different ways:
4.2.1. Live programming
You can change and save the standard setting during the brewing process as follows.
Turn the rotary control in the main menu to “SETTINGS” and press it or touch the settings symbol.
Turn the rotary control to “DRINK RECIPES” and press it.
Turn the rotary control to the drink of your choice (e.g. “ESPRESSO”) and press it.
Turn the rotary control to “LIVE PROGRAMMING”.
Place a cup underneath the spout (g. 5).
To change the standard setting now press the rotary control.
The display shows “SELECT STRENGTH”.
Turn the rotary control to select your preferred strength (left for weaker, right for stronger).
Press the rotary control to conrm your choice of strength.
The display shows “SELECT AROMA”
Turn the rotary control to select your preferred aroma prole (see 3.3. for more information about
the aroma proles).
Press the rotary control to conrm your choice of aroma.
The display shows “PLEASE WAIT”. The appliance grinds, heats up and then starts the preparation.
The display shows “STOP COFFEE?”
Press the rotary control once the required amount of coffee is reached.
The standard setting for the drink of your choice (e.g. Espresso) has now been changed and saved. The
display shows “RECIPE SAVED” for a short time and will then switch back to the main menu with the
new standard settings.
4.2.2. Manual programming
You can also change the standard settings manually.
Turn the rotary control in the main menu to “SETTINGS” and press it or touch the settings
symbol.
Turn the rotary control to “DRINK RECIPES” and press it.
Turn the rotary control to the drink of your choice (e.g. “ESPRESSO”) and press it.
Select strength
Turn the rotary control to “STRENGTH” and press it.
Turn the rotary control to select the strength of your choice (left for weaker, right for stronger).
Press the rotary control to conrm the setting.
Select aroma
Turn the rotary control to “AROMA” and press it.
Turn the rotary control to select the aroma of your choice (see 3.3. for more information about
the aroma proles). Press the rotary control to conrm the setting.
Select quantity
Turn the rotary control to “COFFEE QUANTITY” and press it.
Turn the rotary control to select the quantity of your choice (from 20ml to 240ml) and press it.
Note: Make sure that your cups t.
Select temperature (if “INDIVIDUAL” is set in “SETTINGS”, “TEMPERATURE”, “COFFEE” (see 3.4.).
Turn the rotary control to “TEMP.COFFEE” and press it.
Turn the rotary control to the temperature of your choice (STANDARD, HIGH, MAXIMUM) and
press it to conrm the setting.
To exit a menu level turn the rotary control to “EXIT” in each level. Then press it or touch “EXIT”.
Repeat this until you are back in the main menu.
Note: If no changes are made to the settings for some time, the appliance switches back to the main
menu automatically.
86 87
4. Preparing coffee specialities 4. Preparing coffee specialities
