22201100. Replacement of the thermostatic switch for the new 1200W motor A-0.6.5.
22231100. Replacement of the motor grommets (7) and frame (5) 11
ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 SERIES
Instruction No. 82201300/00-08
To be performed by a skilled
or instructed person only !
Disconnect the vacuum cleaner
from the power supply before
starting the work!
! Models with bag-full indicator:
Open the dust cover until it stops
and continue with a little pressure
by hand until it slides free of the
hinges.
Models with no bag-full indicator:
Open the dust cover and lift it out
of the hinges.
Remove filter with dust bag.
Remove the dust bag holder by
pressing bottom clip and ease the
holder out of the bottom. This
releases the hook at the container
wall.
@ To separate the top and bottom
housing and avoid scratches on the
parts, place tool no. V-33580 under
the buffer.
Follow instruction 82361500
Remove the strap by hand or tool
no. V 33581. Lift up the buffer and
remove the top housing.
# Free the cord with plug from the
terminal box in the top housing by
using a Pozi screwdriver no. 2 or in
old models press. it out by hand.
Remove the cord reel and lock the
cord to the reel. Remove internal
wires and release the on/off switch
by pressing a screwdriver under it.
Remove the motor housing with
four screws by a Pozi screwdriver
no. 2.
$ Remove the sound suppressor
(1) if provided and the cover (2) on
the motor housing with four screws
(3) and lift out the motor unit (4).
Unplug the existing internal wire kit
with thermostatic switch mounted
in the motor frame (5). Remove the
old and replace with the new ther-
mostatic switch and press in place
into the slots (6) and press the
wires back in the slots on top of the
motor frame (5). Refit in reverse
order.
Press the buffer back in place by
hand after mounting the strap
around the housings.
Q
WE
Q
1
2
7
5
6
4
3
R
