118408XX. Replacement of the cable reel A-0.6.5.
223526XX. Replacement of the cable reel, King 500 Series 5
ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 & KING 500 SERIES
Instruction No. 82186900/00-09
To be performed by a skilled
or instructed person only !
Disconnect the vacuum cleaner
from the power supply before
starting the work!
! Models with bag-full indicator:
Open the dust cover until it stops
and continue with a little pressure
by hand until it slides free of the
hinges. Models with no bag-full
indicator: Open the dust cover and
lift it out of the hinges.
Remove filter with dust bag.
Remove the dust bag holder by
pressing bottom clip and ease the
holder out of the bottom. This
releases the hook at the container
wall.
@ To separate the top and bottom
housing and avoid scratches on
the parts, place tool no. 22361400
under the buffer.
Follow instruction 82361500
Remove the strap (12) by hand.
Lift up the buffer and remove the
top housing.
# Free the cord with plug from
the terminal box in the top
housing by using a Pozi
screwdriver no. 2 or in old
models press it out by hand.
Remove and replace the cable
reel with the internal wires.
The cable reel spring is pre-
tightened and this should not be
changed so as to avoid damage.
Do not unwind the cable and do
not tighten the cable additionally.
Note:
Wire to be wrapped around the
post to reduce wire slack before
mounting cable reel.
It is necessary to replace the
cord reel button.
Open the accessory cover until it
stops and continue with a little
pressure by hand until it slides free
of the hinges and remove it.
$ Push down the cable release
button (a) and press by hand the
dust cover button sideways (b)
to release it, and lift it up (c).
% Release and remove the side
pivots (2) with a pair of pliers (5).
To remove the cable reel button
(3) and/or the on/off button (4),
press the two snaps on the but-
ton (d) to release it from the top
housing & lift it away after turn-
ing it 30 degrees.
Refit in reverse order.
Press the buffer back in place
by hand after mounting the strap
around the housings.
Testing the cable reel.
Draw the cable out completely
and rewind it by pressing the
button on top of the machine.
WE
Q
12
3
1
4
5
2
2
a
b
c
R
T
d
d
