609299
11
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
11Original Instructions
EN
SC UNO/DUO
Therefore, it is important to follow the laws concerning the
removal of polluting and dangerous materials when repla-
cing spare parts or disposing of high pressure washer.
It is recommended that you bring the rejected parts to wa-
ste disposal areas or recycling plants that are approved
for the destruction of these types of materials.
Troubleshooting
You have chosen the best quality and therefore deserve the best service. To avoid unnecessary dis ap point ments, you
should check the following before contacting the nearest Nil sk service organisation:
Symptom Reason Action
Machine/pump will not start > A fuse has blown
> Power/plug not connected
> Thermal switches in motor activated
(red lamp ashes)
> Thermal relay switched off (red lamp
ashes)
> Oil shortage in pump
Change the fuse.
• Connect power/plug.
Let the motor cool. Start the machine
and check that the working pressure
is not too high and that the mains
voltage corresponds to the speci ca-
tions.
• Re ll with oil.
Fuses blow > Installation does not correspond to
the ampere consumption of the ma-
chine
Change to an installation correspon-
ding to the ampere consumption of
the machine at a minimum. Replace
the fuse.
Working pressure too low > Nozzle worn
> Wrong spray lance
> Reduction valve of spray lance not
adjusted to max. pressure.
> Nozzle partly clogged up
Replace the nozzle.
Replace the spray lance (see section
B4/B5).
Turn reduction valve completely
counter-clockwise.
Clean the nozzle (see section C.3).
Working pressure not steady > Water temperature too high
> Insuf cient water supply
> High pressure hoses too long
> Air in the system
> Water inlet lter clogged up
Lower the temperature of the inlet
water to max. temperature (see
Technical Speci cations).
Check water inlet lter. If that does
not solve the problem, the water
supply for the machine is insuf cient.
NB! Avoid long, thin hoses (min.
3/4").
Dismount high pressure extension
hoses and retry.
Extension hose max. 50 m.
NB! Avoid long extension hoses with
many couplings.
Vent the system (see section A.7).
• Clean lter (see sect. D.2)
No working pressure > Nozzle clogged up
> No inlet water
> High pressure cock of outlet point
open.
Clean nozzle (see sect. D.3)
Check that the shut off cock of the
water inlet is open. Check that the
water supply meets the requirements
(see section A.4)
Close all high pressure cocks not in
use.
Machine starts and stops > Leaky hose/ pipeline/spray handle Repair leak.
Machine stops > Oil shortage in pump. Red lamp
ashes
Top up with oil
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nilfisk-ALTO SC UNO 6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nilfisk-ALTO SC UNO 6 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Nilfisk-ALTO SC UNO 6

Nilfisk-ALTO SC UNO 6 Gebruiksaanwijzing - Nederlands - 19 pagina's

Nilfisk-ALTO SC UNO 6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Nilfisk-ALTO SC UNO 6 Gebruiksaanwijzing - Français - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info