570936
65
Verklein
Vergroot
Pagina terug
1/75
Pagina verder
129128
Chapter
4
Wireless Slave Flash Photography
When used as a slave flash unit, the SB-26 will fire when its
Wireless Slave Flash sensor catches light from the master
flash unit.
For Wireless Slave Flash photography, the SB-26s
Wireless Slave Flash selector provides two positions—“D
("delay" mode) and "S" ("simultaneous" mode).
In "delay" mode, the SB-26 used as a slave flash unit will
fire a moment after the master flash unit fires, without
affecting the master flash units flash exposure control.
In "simultaneous" mode, the SB-26 as a slave unit will fire
at the same time as the main flash unit fires. When perfom-
ing Wireless Slave Flash to eliminate harsh shadows in TTL-
auto or non-TTL auto flash mode, the master flash unit's
flash exposure control may be affected by the light from the
slave flash unit, resulting in underexposed subject. (See
photos at right.)
When the Wireless Slave Flash selector set at "D" or "S",
U appears in the LCD panel.
S D OFF
SB-26
S D OFF
SB
-
26
Settings on flash units and camera
Set the SB-26's wiresless slave flash selector to "D" or
"S". If two or more SB-26 units are usedone as a master
unit, the other as slave unit(s) or all as slave unitsset the
Wireless Slave Flash selector on all units to the same
setting. With the Wireless Slave Flash selector set at
"OFF", the SB-26 as a slave flash unit does not fire when
the Wireless Slave Flash sensor catches the light.
Set the flash mode selector of the master flash unit to TTL
auto, non-TTL auto or manual, as you like. Do not set FP
High-Speed sync when the SB-26 or SB-25 is used as a
master flash unit.
Set the flash mode selector of SB-26 used as a slave flash
unit to non-TTL auto or manual. TTL auto flash is not suit-
able.
Set the camera's exposure mode to Aperture-Priority Auto
or Manual exposure mode and set the desired aperture on
the lens.
Locate the master flash unit within the flash shooting dis-
tance range (for TTL auto or non-TTL auto flash mode) or
at the flash shooting distance (for manual flash mode). If
camera/Speedlight combination does not offer automatic
aperture adjust ment on the Speedlight, you must first set
the aperture value (same as set on the lens) on the
Speedlight.
For "delay mode", set the camera's shutter speed one-
step slower than the camera's synchronization speed.
(When using the F5, F90X/N90s, F70-Series/N70 or F4-
Series camera and the SB-26 as a master flash unit, this is
not necessary because the shutter speed is automatically
switched.)
When using the F5, F90-Series/N90 or F70-Series/N70
cameras, note the following:
with the SB-26 as a master flash unit set at TTL auto
flash mode, Monitor Preflashes will be automatically can-
celled when the multiple flash selector set at "D" or "S".
With the SB-25 as a master flash unit set at TTL auto
flash mode, avoid Monitor Preflashes by upward tilting or
rotating the flash head. If you should not do so, Monitor
Preflashes will cause the slave flash unit to fire before
shutter release.
With the Wireless Slave Flash selector set at "D" or "S",
the STBY position does not automatically turn off the
SB-26.
For rear-curtain sync, set the Wireless Slave Flash selector
on master and slave flash units to "S".
In "delay" mode, rear-curtain sync is not recommended.
Make sure that the slave flash unit is disconnected from
camera body or connected camera power is off.
For Speedlights without Wireless Slave Flash function
Use the TTL multiple flash terminal or sync/multiple
flash terminal on the SB-26 (used as a slave flash unit)
to connect a Speedlight without Wireless Slave Flash
function via a sync cord SC-18/SC-19 or SC-11/SC-15.
The connected Speedlight(s) will fire at the same time
the SB-26 (slave flash unit) fires.
Multiple Flash Photography
SB-26 (E) 03.1.14 7:16 PM Page 128
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nikon SB-26 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nikon SB-26 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Nikon SB-26

Nikon SB-26 Gebruiksaanwijzing - Deutsch - 75 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info