604497

Nikon Nikon Team REALTREE LASER 1200 Handleiding

2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Operational Summary
Caution — use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure
1. Installabatteryinthebatterychamber.(See“ChangingBatteries”)
2. Rubber eyepiece cup
Eyeglass wearer: Collapse the eyepiece cups.
Non-eyeglass wearers: Do not collapse the eyepiece cups.
3. Diopter adjustment
Adjust diopter to obtain a clear image in the LCD.
First, rotate the diopter adjustment ring counterclockwise until it comes to a complete stop. Next, turn on the power to activate
the LCD when you look through the Laser 1200. Rotate the diopter adjustment ring clockwise until the display comes into
focus.
If the diopter is not adjusted to correspond to your eyesight, you may not be able to clearly focus your subject.
4. Measuring
Note:DepressingandholdingdownthePOWERbuttoncausesallsymbolstobedisplayedintheLCDpanel.Afteryouremoveyour
fingerfromthePOWERbutton,thelast-usedsettingisdisplayed.(IfyoubrieflypressthePOWERbuttonthenremoveyourfinger,theLCD
panel may display the last-used setting without displaying all of the symbols. This is not a malfunction or other problem.)
6. Selecting target priority
Target Priority Switch System allows you to select display mode from First Target Priority and Distant Target Priority.
POWERbutton
Keep pressing
The instrument continuously
measures distance for
20 seconds
• Continuousmeasurement
5. Select unit of measurement: m (meter) or YD (yard)
Meters
[
]
Yards
[
]
PressandholdMODEbuttonformorethan
1.5 seconds until the display changes
First Target
Priority
[
]
Distant
Target
Priority
* DepressMODEbuttontochangethemeasurementunit.
Switching procedure
1. LCD panel should be on.
2. Press and hold MODE button, then depress and hold POWER button within one second, and continue to press and hold both buttons. (If
buttons are not pressed in the correct order, switching will not take place.)
3. Hold both buttons (approx. two seconds) until "G" appears or disappears (depending on current target priority), to confirm switching.
Then release buttons.
DepressPOWERbutton
LCD illuminates
Align the reticle [ ] with the target
DepressPOWERbutton
[576.5] or [1055]
Power off, display disappears
[- - - -]
8secondspasswithout
operation
Before display
disappears
Power on, Last Use default settings are active, Backlight off
Change to Target Priority
WhentheFirstTargetPriorityisselectedanddoesnotappearwhen
Distant Target Priority is selected.
Start measuring
[
] indicates “Now measuring”
Successfully
measured
Display distance
Fail to measure/Cannot measure
PressandholdMODEbutton,
thendepressPOWERbutton
(continuetopressandholdMODEbutton)
Measureagain
Operating results
Conditions/operation
[ ] apprears
The Nikon Laser 1200 features a Roof-prism monocular optical system for viewing your target. A liquid crystal display (LCD) is
mounted within the optical system that when activated, displays a reticle for targeting, meter/yard and Target Priority and a target
quality gauge, as well as precision and low battery indicators. It is also equipped with a built-in backlight.
Specifications
Troubleshooting/Repair
If problems persist after consulting the Troubleshooting Table, please contact your local dealer to check/repair the Laser
1200. Never let anyone other than the official representative of the product manufacturer check or repair the Laser 1200.
Failure to follow this instruction could result in injury, or damage to the product.
If your Nikon Laser 1200 should require repair, please contact your local dealer for details regarding where to send it. Before doing
so, you are advised to consult the Troubleshooting Table below.
* Waterproof models:
The Laser 1200 is waterproof, and will suffer no damage to the optical system if submerged or dropped in water to a maximum depth
of 2 meters for up to 5 minutes.
The Laser 1200 offers the following advantages:
• Canbeusedinconditionsofhighhumidity,dustandrainwithoutriskofdamage.
• Nitrogen-filleddesignmakesitresistanttocondensationandmold.
Observe the following when using the Laser 1200:
• Astheunitdoesnothaveaperfectlysealedstructure,itshouldnotbeoperatednorheldinrunningwater.
• Anymoistureshouldbewipedoffbeforeadjustingmovableparts(focusingknob,eyepiece,etc.)oftheLaser1200toprevent
damage and for safety reasons.
To keep your Laser 1200 in excellent condition, Nikon Vision recommends regular servicing by an authorized dealer.
**Thebatterychamberiswaterresistant,notwaterproof.WatermayenterthedeviceiftheLaser1200issubmergedinwater.Ifwater
enters the battery chamber, wipe out any moisture and allow time for the chamber to dry.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
Do not use the Laser 1200 for purposes beyond the limits of its stated accuracy.
[Deciding which Target Priority to use]
Whenobtainingdifferentresultsfromasinglemeasuringoperation,theLaser1200willdisplaythedistancetothefarthesttarget
on the LCD panel when using Distant Target Priority mode, while First Target Priority mode will show the range to the nearest
target.
ex.)Whenmeasuringatreestandinginfrontofahouse;
“135m”(distancetothetree)willbedisplayedinFirstTargetPrioritymode,and“157m”(distancetothehouse)inDistantTargetPriority
mode.
First Target Priority mode, for example, has applications for golf, while Distant Target Priority is useful when hunting in heavily
wooded areas.
7. Backlight
Use the backlight to see the LCD panel in dark conditions.
BypressingMODEbuttonbriefly(lessthan1.5seconds)whilethepowerison,thebacklightcanbeturnedONandOFF.
ThebacklightcanalsobeturnedoffbyturningtheLaser1200’spoweroff.Inthiscase,thebacklightwillbeoffwhentheLaser
1200’spoweristurnedonagain.
8. Low battery indication
Flashing
indicates that the battery charge is low and battery should be replaced. (See “Changing Battery”)
Tree House
Distance to target 135m 157m
Symptom Check Points
Unit does not turn on — LCD fails
to illuminate
•DepressPOWERbutton.
•Checkandreplacebatteryifnecessary.
Target range cannot be obtained
•Besurethatnothing,suchasyourhandorfinger,isblockingthe
laser emission aperture and laser detector.
•Besurethatthelaseremissionapertureandlaserdetectorareclean.
Clean them if necessary.
•Besurethatthetargetshapeandconditionisappropriatetoreflect
the laser beam.
•Replacebattery.
[- - - -] (“Cannot measure”)
appears
•BesuretoholdtheunitsteadywhiledepressingthePOWERbutton.
•Besurethetargetiswithinmeasuringrange(10-1,100m/
11 - 1,200 yards)
Closer target cannot be
measured
•Besurethatnothing,suchasleavesorgrass,isbetweentheLaser
1200 and the target.
Target beyond a certain
distance cannot be measured
•Besurethatnothing,suchasleavesorgrass,isbetweentheLaser
1200 and the target.
Measurementresultisunstable
•Replacebattery.
•Besurethatthetargetshapeandconditionisappropriatetoreflect
the laser beam.
•BesuretoholdtheunitsteadywhiledepressingthePOWERbutton.
•Besurethatnothing,suchasleavesorgrass,isbetweentheLaser
1200 and the target.
Incorrect result is displayed
•Replacebattery.
•Besurethatthetargetshapeandconditionisappropriatetoreflect
the laser beam.
•Besurethatnothing,suchasleavesorgrass,isbetweentheLaser
1200 and the target.
Optical system
Type Roof-prism monocular
Magnification(x) 7
Effective diameter of objective lens (mm) ø25
Angular field of view (real) (˚) 5.0
Eye relief (mm) 18.6
Exit pupil (mm) ø3.6
Diopter adjustment ±4m
-1
Laser
Class FDA Class I
Wavelength(nm) 870
Pulse duration (ns) 14
Output(W) 15
Beam Divergence (mrad) V: 2.1, H: 0.021
Others
Measuringrange 10m-1,100m/11 yards-1,200 yards
Distance measurement display step
<1,000m: 0.5m/yard step
≥1,000m: 1m/yard step
Structure
Body:Waterproof(maximumdepthof2metersforupto5
minutes.)**
Batterychamber:Waterresistant***
Operating temperature (˚C) -10—+50
Operating humidity (%RH) 80(withoutdewcondensation)
Power source CR2 lithium battery (3V DC) x 1
Dimensions(LxHxW)(mm) 145x82x47
Weight(g) Approx.280(withoutbattery)
Safety FDA: Class 1 laser product (21CFR 1040.10 and 1040.11)
Fcc:FccPart15SubpartBClassB
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nikon Nikon Team REALTREE LASER 1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nikon Nikon Team REALTREE LASER 1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info