570908
53
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
45
Inserting film into the adapter film slot will activate the adapter’s feed mechanism. Be sure to load the
film while the mechanism is in operation, as otherwise an error may occur.
When film is inserted in the SA-21, the adapter’s lock mechanism will be
activated, locking the adapter in place and preventing its removal while film
is present in the adapter. Before removing the SA-21 from the scanner,
wait until the status LED on the front of the scanner glows steadily and
eject the film by clicking the eject button in the scan window (see right). If
your computer is off or Nikon Scan is not running, you can also eject the film by turning the scanner off
and then on again and waiting for the film to be ejected automatically (be sure the status LED on the
front of the scanner is glowing steadily before turning the scanner off). Once the film has been ejected,
the lock will be released and the adapter can be removed by sliding it out of the adapter slot. Remem-
ber to close the sliding cover when no adapter is present in the scanner.
Attempting to remove the adapter while it is locked may interfere with the connection between the
adapter and the scanner. If the scanner fails to recognize the adapter, push the adapter back into the
adapter slot to re-establish the connection.
Pg. For more information on:
75 Scanning short, long, or damaged film strips
71 What to do if film jams in the SA-21
12-3
Insert the film to be scanned into the adapter film slot. The type of film that can be scanned depends on
the adapter. This step describes the kinds of film that can be used with the SA-21 strip-film adapter and
MA-20 (S) slide-mount adapter.
SA-21
The SA-21 can be used to scan strips of 35 mm film from two to six
frames in length. Hold the film lightly by both edges with the emul-
sion surface face down (i.e., with the shiny side of the film face up),
grasping it gently so that the edges of the film do not curl, and slide
it into the adapter film slot as shown at right. Once the film has
been inserted a short distance, the adapter’s feed mechanism will
be activated and the film will be loaded automatically. The status
LED will blink while the scanner readies the film for scanning.
Note that not all film is suitable for use in the SA-21; refer to “Troubleshooting for the SA-21: Scanning
Short, Long, or Damaged Film Strips” for information on what film can not be scanned in the SA-21 and
how to modify it for scanning. Before inserting the film, make sure that it is free from dust, and avoid
getting dust on any portion of the film that protrudes from the adapter during scanning.
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nikon Coolscan IV ED bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nikon Coolscan IV ED in de taal/talen: Engels als bijlage per email.

De handleiding is 6,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Nikon Coolscan IV ED

Nikon Coolscan IV ED Gebruiksaanwijzing - Nederlands - 112 pagina's

Nikon Coolscan IV ED Gebruiksaanwijzing - Deutsch - 112 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info