565483
12
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
- 12 -
When the mode dial is set to A-REC or M-REC, the current flash
setting can be changed using the button next to the
control panel. The setting changes each time the button is pressed,
cycling through the different flash modes in the following order:
SLOW
AUTO
Tips
When lighting is poor and the flash is set to “Off” ( ) or “Slow Synchro”
( ), shutter speed is slowed and photos may be blurred. If possible, use
a tripod when lighting is poor.
The built-in flash will automatically be set to “Off” when:
you use autofocus with a setting of “Infinity” ( )
you choose a multi-shot setting of “Continuous,” “16-shots” or “VGA
sequence” (an external flash can still be used with these settings)
you use best-shot selection (BSS)
you use lens converter (LENS) settings
the AE LOCK option in the M-REC menu is on
When using the flash, be sure the flash window is unobstructed.
Using an External Flash
A flash bracket (the SK-E900 Multi-Flash Bracket Unit) is available sepa-
rately for connecting external flash units to the COOLPIX 950. When the
bracket is connected to the camera’s synchro-flash terminal, external flash
units mounted on the bracket are synchronized with the camera’s built-in
flash, increasing the size of the area illuminated and allowing sophisticated
flash techniques such as bounce-flash photography. You can use flash
settings such as “Auto,” “Slow Synchro,” and “On” with both the external
and built-in (internal) flash units, or you can turn the built-in flash off and
use the external flash only (to turn off the built-in flash, use the CON-
TROLS item in the M-REC setup menu). When the flash is fired, the
brightness of the external and built-in flash units is controlled by the
camera.
Instructions for attaching the optional SK-E900 flash bracket and connect-
ing external flash units may be found in the SK-E900 instruction manual.
When the SK-E900 is in place, the following Nikon flash units (available
separately) can be used: SB-28, SB-26, SB-25, SB-24, SB-22S, and SB-22.
The use of non-Nikon flash units is not recommended.
Once the external flash unit has been mounted on the flash bracket and the
bracket’s lead connected to the camera’s synchro-flash terminal, you are
ready to use the external flash for synchro-flash photography. Turn the
flash unit on (do not set the flash to “stand-by”—STBY—as the flash may
turn off unexpectedly), set the metering mode to TTL, and choose an
illuminating angle of less than 28 mm. The intensity of the light produced
by the flash will be controlled by the camera’s built-in photocell.
Flash status is indicated by the red
flash lamp next to the viewfinder.
Flash lamp glows red: The camera is ready to fire the flash
when the shutter-release button is
fully pressed.
Flash lamp blinks: The flash is charging. Wait until the
lamp glows steadily before taking a
picture.
Using the Buttons (A-REC, M-REC): Flash Settings
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nikon Coolpix 950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nikon Coolpix 950 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Nikon Coolpix 950

Nikon Coolpix 950 Gebruiksaanwijzing - Nederlands - 57 pagina's

Nikon Coolpix 950 Gebruiksaanwijzing - Deutsch - 57 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info