619203

Niko 350-20082 Handleiding

9
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
PM350-20082R15342 nv Niko sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@niko.be — www.niko.eu EN
350-20082
9
5.4. Examples of applications
Example 1: classroom
DIP switch 1 DIP switch 2 DIP switch 3 DIP switch 4
ON x
OFF x x x
How the detector works:
- Both channels function as absence detectors. Activate the lighting by pressing the push button briefly
(daylight-independent).
- The lighting is automatically switched off again after a preset time (switch-off delay), provided that no
more motion is detected by the detector in the detection area.
- Lighting can also be switched off manually (= eco off) without having to wait for the switch-off delay.
- In addition, you can also press and hold the push button, which is ideal for situations in which the lighting
should remain switched on (e.g. exam) or off (e.g. movie) for a longer period of time:
• By pressing and holding the push button while the lighting is switched on, the lighting will be switched
off. The detector will be locked for as long as activity is detected and the preset switch-off delay + 2 hours has
not yet elapsed. After that, the detector will return to the selected settings and the lighting will be switched on.
• By pressing and holding the push button while the lighting is switched off, the lighting will be switched
on (irrespective of the daylight level). The lighting remains switched on for as long as activity is detected
and the preset switch-off delay + 2 hours has not yet elapsed. After that, the lighting will be switched off,
the detector will return to the selected settings and the lighting will be switched on.
The red indication LED on the detector flashes (0.25 s on and 5 s off) to indicate that you have pressed and held
the push button. The ‘long push’ function can be interrupted at any time by briefly pressing the push button, after
which the lighting will be switched on and the detector will return to the selected settings.
Example 2: office with ventilation
DIP switch 1 DIP switch 2 DIP switch 3 DIP switch 4
ON x
OFF x x x
How the detector works:
- Channel 1 functions as an absence detector, which means that lighting must be switched on by briefly
pressing the push button (daylight-dependent). Channel 2 functions as a presence detector, which means
that the ventilation is switched on automatically.
- The lighting is automatically switched off again after a preset time (switch-off delay), provided that no
more movement is detected by the sensor in the detection area or the light level has exceeded the preset lux
value for five minutes.
- The lighting can be switched on manually at any time by briefly pressing the push button. You can also switch
off the lighting manually (= eco off).
- In addition, you can also press and hold the push button, which is ideal for situations in which the lighting
should remain switched on (e.g. exam) or off (e.g. movie) for a longer period of time:
• By pressing and holding the push button while the lighting is switched on, the lighting will be switched
off. The detector will be locked for as long as activity is detected and the preset switch-off delay + 2 hours has
not yet elapsed. After that, the detector will return to the selected settings and the lighting will be switched on.
• By pressing and holding the push button while the lighting is switched off, the lighting will be switched
on (irrespective of the daylight level). The lighting remains switched on for as long as activity is detected
and the preset switch-off delay + 2 hours has not yet elapsed. After that, the lighting will be switched off,
the detector will return to the selected settings and the lighting will be switched on.
The red indication LED on the detector flashes (0.25 s on and 5 s off) to indicate that you have pressed and held
the push button. The ‘long push’ function can be interrupted at any time by briefly pressing the push button, after
which the lighting will be switched on and the detector will return to the selected settings.
Example 3: staircase
DIP switch 1 DIP switch 2 DIP switch 3 DIP switch 4
ON x x x x
OFF
How the presence detector works:
- The lighting functions as a presence detector and is automatically switched on when the detector detects
movement in the detection area and the light level does not exceed the preset lux value.
- The lighting is automatically switched off again after a preset time (switch-off delay), provided that no
more motion is detected by the detector in the detection area or the light level has been higher than the preset
lux value for five minutes.
- The lighting can be switched on manually at any time via the push button, irrespective of the daylight level.
6. MAINTENANCE
Dirt may prevent the detector from functioning properly. Therefore, always keep the lens clean and dry. Use a
damp cloth and water with some detergent to clean the lens. Never exert pressure to wipe the lens clean. If the
lens or other parts of the detector are defective, please contact an authorised installer.
7. TECHNICAL DATA
dimensions 64.1 x 117,3 mm (HxW)
power supply voltage 230 Vac ± 10 %, 50 Hz
power consumption 0,2 W
relay contact* NO (max. 10 A), potential-free, light- and motion-sensitive
maximum load* incandescent lamps (2300 W)
230 V halogen lamps (2300 W)
all low-voltage halogen lamps (500 VA)
fluorescent lamps (non-compensated) (1200 VA)
economy lamps (CFLi) (1200 VA)
maximum switching capacity* 140 μF
maximum inrush current* 165 A/20 ms
light sensitivity* 20 – 1000 lux
hysteresis on light sensitivity + 10 %
switch-off delay* 2 – 60 min
mounting height (fig. 3) 2 – 3.4 m
detection angle (fig. 3) 360°
detection range (fig. 3) circular, 24 m (from a height of 3 m)
wire input per connection terminal 3 x 2.5 mm²
protection degree IP54
protection class class I devices
ambient temperature -5 – +50 °C
quality mark CE marked in compliance with EN 60669-2-1
accessories IR remote control (350-20089)
presence or absence detector 360° (slave) (350-20079 or
possibly 350-20071 or 350-20081)
*indicates the value per channel, given that both channels have the same properties
8. WARNINGS REGARDING INSTALLATION
- The installation should be carried out by a registered installer and in compliance with the statutory regulations.
- This user manual should be presented to the user. It should be included in the electrical installation file, and
it should be passed on to any new owners. Additional copies are available on the Niko website or via the Niko
support service.
- During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope
of each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find
the EC declaration of conformity regarding this product at www.niko.eu.
9. NIKO SUPPORT
In case of doubt or for the specific exchange procedure in case of a possible defect, contact the Niko support
service in Belgium at +32 3 778 90 80 or your wholesaler/installer. Contact details and more information
can be found at www.niko.eu under the “Help and advice” section.
10. GUARANTEE PROVISIONS
- The period of guarantee is four years from the date of delivery. The delivery date is the invoice date of
purchase of the product by the consumer. If there is no invoice, the date of production applies.
- The consumer is obliged to inform Niko in writing about the non-conformity, within two months after stating
the defect.
- In case of a non-conformity, the consumer only has the right to a product repair or replacement free of
charge, which shall be decided by Niko.
- Niko shall not be held liable for a defect or damage resulting from incorrect installation, improper or careless
use, incorrect operation, transformation of the product, maintenance that does not adhere to the maintenance
instructions or an external cause, such as damage due to moisture or overvoltage.
- The compulsory regulations of the national legislation concerning the sale of consumer goods and the
protection of the consumer in the countries where Niko sells, directly or via sister companies, subsidiaries,
chain stores, distributors, agents or permanent sales representatives, take priority over the above-mentioned
rules and regulations.
Do not dump this product with the unsorted waste. Bring it to a recognised waste collection point. Together with producers
and importers, you have an important role to play in the advancement of sorting, recycling and reusing discarded electrical
and electronic appliances. In order to finance the waste collection and processing, the government levies a recycling
contribution in some cases (included in the purchase price of this product).
… 9 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Niko 350-20082 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Niko 350-20082 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 8,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info