619206
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
nv Niko sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@niko.be — www.niko.eu PM350-20065R12235
350-20065
Setting the desired detection method. There are
four preset values:
- PIR/US
- PIR only
- US only
- PIR+US
Activating or deactivating the air flow sensitivity.
B. Using the IR remote control
For more information, consult the IR remote control manual (350-20067).
Key Function
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
- You switch on the lights for eight hours. Setting
confirmed by flashing LEDs.
- Press again to return to auto mode.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
- You switch off the lights for eight hours. Setting
confirmed by flashing LEDs.
- Press again to return to auto mode.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
Press this key to unlock the device: you can
change the settings.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
Press this key to lock the device: the new settings
are saved and activated.
If you do not lock the device, it will automatically
be locked after two minutes. All changed settings
are saved.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
You are erasing all IR remote control settings.
The presence detector will operate according to the
settings you entered using the potentiometers.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
With this key, you switch on the lights for two
seconds whenever motion is detected by the device.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
With these red keys, you set the desired light level:
- fixed settings for 10, 30, 100, 400 and 1000 lux.
- a user-defined lux value that will function within a
range from 10 to 1000 lux.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
Press this key until the green and red LEDs on the
presence detector are flashing: the device is in
learning mode to load the user-defined lux value.
The learning time is ten seconds, after which the
LEDs light up and the device returns to auto mode.
If the set lux value is outside the range (10 –
1000 lux), the LEDs will flash rapidly for five
seconds after ten seconds. In this case, the
following values will be used:
- > 1000 lux: the device uses a lux value of 1000 lux.
- < 10 lux: the device uses a lux value of 10 lux.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
Use this key to save and copy Time 1 and lux
values.
1. Press
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
on the presence detectors whose
settings should be learnt. The settings on the
devices must have been entered via the IR
remote control.
2. Press
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
for more than three seconds to save
the settings.
After three seconds, the green LED will flash to
confirm the setting.
3. Press
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
.
4. Press
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
on the device to which the settings
must be sent.
5. Press
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
.
The green LED will flash to confirm the setting.
6. Press
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
.
The Time 1 and lux values have been sent.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
With these blue keys, you set the switch-off
delay.
Press
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
, followed by one of the six settings: 1,
5, 15, 30 or 60 minutes or pulse (1 second on, 9
seconds off).
US
-
US
+
With these keys, you set the sensitivity of the
ultrasonic sensor:
- Each time you press the key, the sensitivity
increases or decreases by 10%. The green LED
will flash with each change.
- When the maximum or minimum sensitivity
has been reached, the LED will light up for two
seconds.
Sens.
Off
Sens.
On
With these keys, you activate or deactivate the
air flow sensitivity.
Test
Learn actual lux
10
Lux
30
Lux
100
Lux
1000
Lux
400
Lux
Pulse
5
Min
15
Min
Time 1
Time 2
30
Min
60
Min
1
Min
Reset
Off
Memo
On
PIR /
US
PIR +
US
US
only
PIR
only
US
-
US
+
Sens.
Off
Sens.
On
With these keys, you select the desired detection
method (PIR/US, PIR, PIR+US, US).
3.3. Detection method
The presence detector includes two LEDs:
• red LED: on when the PIR sensor detects motion.
• green LED: on when the ultrasonic sensor detects motion.
Detection method Application Function
PIR/US Detection of minor movements
in rooms with small obstacles
(furniture, partition walls) or
rooms that are divided into
several smaller areas, such as
public toilets or offices where
partition walls are used.
- The lighting is switched on
whenever the PIR sensor or
ultrasonic sensor detects
motion.
only US - The lighting is switched on
whenever the ultrasonic sensor
detects motion.
only PIR Detection in rooms with no
obstacles, rooms with plenty of
air flow, or when the detection
range is very specific, such
as in small office spaces with
air-conditioning units or small
conference rooms.
- The lighting is switched on
whenever the PIR sensor
detects motion.
PIR+US Detection of minor movements
in classrooms, open plan offices,
etc. This method also prevents
false triggering.
- The lighting is switched on
when both the PIR sensor and
the ultrasonic sensor detect
motion.
- If only one of both sensors
detects motion, the lighting will
remain on.
3.4. Detection range
The detection range of an ultrasonic sensor is oval in shape and covers 8 x 10 m for minor movements (e.g.
hands waving) and 10 x 16 m for major movements (e.g. walking). The detection angle is 360° for both PIR
and ultrasonic sensors. (fig. 6)
The direction of the ultrasonic sensor should aim to the main detection area to achieve the best detection
coverage.
The detection area can be increased by adding a presence detector Dual Tech 360° (slave) (350-20066).
A maximum of ten slaves can be connected to one master. The lighting is operated in accordance with the
settings. Both the master and the slave have the same detection range. When covering a large area using
several presence detectors, it is recommended to take into account an overlap of approximately 20% in the
ultrasonic detection range (fig. 7).
If you would like to exclude motion detection in a portion of the detection area or if the detection area is too
large, cover the sensor lens using the cover cap supplied. This allows the maximum range to be reduced
from 8 m to 6 m or 3 m. The 360° detection angle can be reduced in steps of 30° (fig. 8).
4. OPERATION AND USE
4.1. Activating the system
After connecting to the mains voltage, the presence detector requires approximately 30 seconds warm-
up time (stabilisation). During the warm-up time, the lighting is switched on. After the warm-up time, the
device will operate according to the factory settings.
4.2. General operation
The integrated light sensor continuously measures the daylight level in the detection area (360°) and
compares this level to the preset lux value. Thanks to the light sensor, the light switches on automatically
only if the detector detects motion within the detection range and if the daylight level falls below the preset
lux value:
•Thelightingremains switched on as long as motion is detected.
•After the last motion is detected, the lighting remains switched on for the duration of the
preset switch-off delay (1 to 30 minutes). As soon as the switch-off delay has elapsed, the lighting
switches off.
•Thelightingswitches off automatically as soon the preset daylight level has been reached.
4.3. External push button
The lighting can also be switched on and off via a push button. When you use the push button, the lighting
will be switched on irrespective of the preset lux value.
• Ifthelightingisswitched on via the push button, it will remain on as long as the presence detector
detects motion and the switch-off delay time has not elapsed.
• Ifthelightingisswitched off via the push button, it will remain off as long as the presence detector
detects motion and the switch-off delay time has not elapsed.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Niko 350-20065 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Niko 350-20065 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 5,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info