-d-
Do not install the encoder near any heat sources such as
radiators, heat registers, stoves, and/or other equipment,
that produce heat. Attentive concern and exercise of care
by installing the encoder away from any heat sources is
vital to the safety of the person or persons using the
product. Installing the encoder near such heat sources
could result in personal injury or death to you and/or
others.
Never insert objects of any kind into the encoder through
any encoder openings, as the objects may touch
dangerous voltage points, short out parts, and result in a
risk of fire or electrical shock.
Do not stack the encoder on top of or below other
electronic devices as this can cause heat build-up and
vibration of the encoder. These conditions can damage
the encoder thus voiding the limited warranty.
Do not install the encoder in any area where the
temperature is less than 5°C or more than 40°C. Transfer
from temperature extremes may cause condensation. Let
it sit unplugged at room temperature for at least 45
minutes before plugging it in.
Do not block any ventilation openings to the encoder.
Improper ventilation may be hazardous. Blocking
ventilation openings could result in overheating of the
encoder, which, in turn, may cause fire or electric shock,
which may cause damage to the encoder and/or personal
physical injury or death to you and/or others. Install the
encoder in strict accordance with the manufacturer’s
instructions, carefully following any and all steps set
forth in the instructions in order to avoid physical injury
or death to you and/or others.
Do not place the encoder in an enclosure such as a
cabinet without proper ventilation. Improper ventilation
may be hazardous to your health and safety and the
health and safety of others.
Fully unplug the encoder during lightning storms, or
other dangerous weather that might produce lightning, or
when the encoder is unused for long periods of time.
To reduce the risk of fire or electric shock, do not expose
the encoder to rain or moisture of any kind. Exposing the
