-a-
Niagara Pro User Guide
© 2007 ViewCast Corporation
Safety Instructions Rack
Mount
Rack Mount Instructions
A) Operating Temperature - If installed in a closed or
multi-unit rack assembly, the operating ambient
temperature of a rack environment may be greater than
room ambient. Therefore, consideration should be given
to installing the equipment in an environment compatible
with the maximum ambient temperature of 40
°
C.
B) Reduced Air Flow - Installation of the equipment in a
rack should be such that the amount of air flow required
for safe operation of the equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in
the rack should be such that a hazardous condition is not
achieved due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given
to the connection of the equipment to the supply circuit
and the effect that the overloading of the circuits might
have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted
equipment should be maintained. Particular attention
should be given to supply connections other than direct
connections to the branch circuit (e.g. use of power
strips).
FCC Notice
WARNING: Connections between this device and
peripherals must be made using shielded cables in order
to maintain compliance with FCC radio emission limits.
WARNING: Modifications to this device not approved
by ViewCast Corporation could void the authority
granted to the user by the FCC to operate the device.
The Niagara Pro described has been found to comply
with the limits for a Class A digital device, pursuant to
