Niagara 9100 Series User Guide
ViewCast 23
Easy first time set up
You should read all instructions, notices, and warnings in the Before You Begin section before getting
started with your new Niagara system for the first time. Also, ensure you have all required parts and meet
all system requirements before installing this product.
Do not continue with the installation if you find any components missing or damaged. Contact the
ViewCast reseller where you purchased your Niagara system for assistance in obtaining any missing or
replacement parts.
Connecting to an electrical power source
Niagara system ships with one of the following power cables:
North America power cable
International power cable
UK power cable
To connect the power source:
Attach the block end to the power input located next to the fan on the rear panel of the
system.
Plug the other end of the cable into a wall outlet or surge protection enabled power strip
connected to a wall outlet or other common power source.
WARNING! The plug-socket combination must remain accessible at all times as it serves as the main
disconnecting device.
WARNING! Do not work on the system, connect, or disconnect cables during periods of lightning
activity.