643625

Nextbase In-Car Cam 512G Ultra Handleiding

10
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
Instruction Manual
INTRODUCTION TO USING AN iN-CAR CAM
The Nextbase range of cameras have been designed specifically with ease of use in mind, it is
recommended NOT to change the default settings, which have been carefully selected to give the
best performance for day to day use. The polarising filter (after adjustment) will significantly improve
the recorded picture quality, by removing reflections from the windscreen itself.
Basic operation.
The iN-CAR CAM is set to record video continuously, in files of just 3 minutes in length. There is no
gap between each video file. This means that each video file is a manageable size should you need
to download and send to your insurance company etc. Eventually your MicroSD card will fill up with
video files but don't worry, the camera automatically deletes the oldest file to make space for new
recordings. This way you never run out of space and have plenty of driving historical evidence saved.
Typically a 16Gb card will store the last 2 hours of driving footage.
The Time and Date are automatically set upon the camera from satellite data, however it will always
set Greenwich Mean Time (GMT). For summer months where the clocks are brought forward or for
driving in other countries, adjust the time in the General Settings Menu (Time Zone / DST) to
account for the time difference from GMT by adding or subtracting 1 hour etc, if required.
There are 3 modes of camera operation. Press the MODE button to select accordingly.
Video - the default mode when the camera is turned on, for video recording.
Photo - allows you to take still photographs.
Playback - allows you to view recorded video or photographs upon the cameras LCD screen.
Automatic Start / Stop Technology. The iN-CAR CAM senses power supplied to the cigarette power
socket as soon as the vehicle ignition is turned on and will start to record automatically.
When the ignition is turned off, the iN-CAR CAM will perform an automatic shutdown process.
1. Tips for capturing best video footage:
1.1 Position the iN-CAR CAM in the centre of the windscreen and ideally behind the rear view
mirror so it is not a distraction to the driver.
1.2 Reduce the amount of sky in the picture, by angling the view of the camera towards the road.
Too much sky will make the road appear darker due to the automatic exposure compensation.
1.3 The purpose of the Polarising filter is capture light from outside the vehicle NOT reflections
from within. To set the polarising filter, place a piece of paper on your dashboard below the rear
view mirror, but away from the windscreen. With the camera turned ON, you will see the
reflection of the paper in the LCD screen. Rotate the front ring of the polarising filter to reduce
reflection to the lowest possible level. This dramatically improves the recorded image quality.
2. Tips for stable memory card performance:
2.1 Periodically reformat the memory card. Every 2-3 weeks we recommend that you reformat
the memory card. This will wipe any files from the card and set it up afresh for continued use
with your iN-CAR CAM.
Of course, you should only do this AFTER you've downloaded any files from the card that you
may want to keep, as formatting the card will remove all content.
2.1 Format your memory card using the iN-CAR CAM. This will make sure that the card is
structured specifically for your camera. Press MENU twice and choose the Format Card
option. Follow the on-screen instructions accordingly.
2.2 To prevent the chance of damage being caused to the memory card or the files stored upon it,
turn OFF the iN-CAR CAM before removing or inserting the memory card.
3. Tips for using the playback software:
3.1 Copy files from the memory card to your PC and view the files from your PC directly, using
the supplied playback software.
03
TABLE OF CONTENTS
INTRODUCTION TO USING AN IN-CAR CAM
TABLE OF CONTENTS
PRECAUTIONS
CAUTIONS ON USING THIS PRODUCT
PRODUCT SPECIFICATION
PACKAGE CONTENTS
PRODUCT FEATURES
PARTS & CONTROLS
IN VEHICLE INSTALLATION
VIDEO MODE
PHOTO MODE
PLAYBACK MODE
GENERAL SETTINGS MENU
MASS STORAGE & PC CAMERA
VIDEO & AUDIO OUTPUT
NEXTBASE REPLAY SOFTWARE FOR WINDOWS
NEXTBASE REPLAY SOFTWARE FOR MAC
TROUBLE SHOOTING
.............................................................
.................................................................................................
.............................................................................................................
......................................................................
.........................................................................................
.................................................................................................
.................................................................................................
...................................................................................................
.........................................................................................
................................................................................................................
..............................................................................................................
........................................................................................................
.......................................................................................
................................................................................
.............................................................................................
....................................................
..............................................................
..................................................................................................
03
04
05
05
06
07
07
08
11
14
17
19
21
23
24
25
33
39
04
PRECAUTIONS
CAUTION:
LCD:
WEEE:
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users
in private households in the European Union.
This symbol on the product or on the packaging indicates that this equipment cannot
be disposed of as household waste. You must dispose of your waste equipment and/or
battery by handing it over to the applicable take-back scheme for the recycling of
electronic equipment and/or batteries. For more information please contact your local
household waste disposal office.
A Liquid Crystal Display (LCD) screen is a multilayer complex component, containing
230,400 pixels. Pixels can however fail during normal product life. 1 pixel = 0.0004%
failure rate, and one pixel failure per year of operation is considered normal and not
a cause for concern.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the instruction manual unless you are qualified to do so.
Have the unit serviced by a qualified service technician if;
The Unit has been exposed to rain or water.
The unit does not seem to operate normally.
The unit exhibits a marked change in performance.
WARNING:
Do not expose this product to rain, moisture or water under any circumstances, doing
so may result in the risk of electric shock or fire.
Please read this manual carefully before operation and keep it for future reference. It will be helpful
should you encounter any operational problem.
1. Ensure that the windscreen is free of dirt or grease before placing mount upon it.
2. Do not obscure the view of the road ahead or impede the deployment of any airbags in the event
of an accident.
3. When not in use, please disconnect the car adaptor from both the 12/24Vdc outlet in your vehicle
and the device itself.
4. Only clean the device with a soft dry cloth, for tough dirt, apply some neutral detergent diluted in
5 to 6 parts water to a soft cloth.
Note that alcohol, thinner, benzene etc could cause damage to the paint or coatings.
5. Avoid making contact with the lenses as damage may be caused.
6. If required clean the glass lens carefully using spectacle lens cleaning fluid on a soft cloth only.
7. The video recordings made by this Digital Video Recorder are intended for personal use only.
8. Publication of the recordings on Youtube, the internet or other methods are subject to the
Data Protection Act and the requirements thereof must be adhered to.
If the Digital Video Recorder is to be used within a commercial environment, i.e. truck use, then
the CCTV regulations apply also, in addition to the Data Protection Act regulations. This includes
labeling to identify the use of CCTV is taking place, the omission of Audio recording and informing
the relevant authorities of who controls the data.
9. Video playback upon the device which is visible to the driver is prohibited or restricted in some
countries or States. Please adhere to these laws.
10. Whilst driving, do not adjust the controls of your device as this is a distraction to driving.
CAUTIONS ON USING THIS PRODUCT
05
Model Number / Name
Power Requirements
Power Supply
Sensor Resolution
Lens Type / Angle / Aperture
Recording Resolution (Max.)
Screen Size
Screen Resolution
Screen Ratio
Card Reader
SD Card
(Recommended Type)
SD Card Recorded File
Capacity
(based on default settings)
Recording Format
Video Out
Internal Battery
Unit Dimensions
Unit Weight
NBDVR512G / NEXTBASE iN-CAR CAM 512G ULTRA
5V / 1.5A (USB socket)
12-24Vdc Car Power Cable (supplied)
Fuse Type: 20mm Glass Fast Blow 2A
Output: 5Vdc
2M Pixel (2,000,000 Pixel)
6G / 140° / F1.6
1920 x 1080 @ 30fps
2.7"
960 (W) X 240 (H) pixels x RGB
16:9
MicroSD, Class 6-10, <=32GB
8-32GB Class 10 (30mb/s) branded (not supplied)
8GB Micro SD = 60mins of recording
16GB Micro SD = 120mins of recording
32GB Micro SD = 240mins of recording
MOV
High Definition: Type C Socket (Video / Audio)
Standard Definition: 3.5mm Jack (Video / Audio)
Lithium-ion 3.7V / 140mAh (approx.6mins recording time)
Battery design allows the 'Auto Power Off' feature to function in
event of power loss within the vehicle. It is not intended as an
alternative power source to replace the supplied car adaptor.
112.8 x 40.5 x 59.5mm
127g
PRODUCT SPECIFICATION
06
PACKAGE CONTENTS
iN-CAR CAM
HD Cable
Window Mount
Car Power Cable USB Cable
PRODUCT FEATURES
Thank you for purchasing this NEXTBASE iN-CAR CAM product, in this section we will outline some
of the features available with this device.
2.7" 16:9 LCD Colour Screen
Large screen for ease of use and viewing the playback of recorded videos and photos.
2.0M PIXEL CMOS Sensor
Provides high quality recording up to 1920 x 1080P Full HD.
GPS Logger x10 speed
GPS co-ordinates, date and time are recorded, the journey can then be viewed on a map using the
supplied Windows / Mac playback software.
G Sensor / File Protection
In the event of an impact the device will automatically 'protect' the recording, stopping the file from
being over-written.
Individual files can also be 'protected' when viewed within playback mode.
Polarizing Filter
The polarising filter can be adjusted to reduce reflections on the inside of the windscreen being
captured during recording.
Automatic Start / Stop Technology
The iN-CAR CAM senses power supplied to the cigarette power socket as soon as the vehicle
ignition is turned on and will start to record automatically.
When the ignition is turned off, the iN-CAR CAM will perform an automatic shutdown process.
Built-in Microphone & Speaker
Record audio to compliment the video recordings.
High Definition Output
View files directly from your device using the supplied High Definition cable to an external screen.
Manuals & Software
Disk
Quick Start
Guide
Please check the contents of your iN-CAR CAM product.
Product appearance may differ slightly to that shown above.
07
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Mac is a trademark of Apple Inc
2012 Google Inc. All rights reserved. Google Maps™ is a trademark of Google Inc.
PARTS & CONTROLS
Please see below to identify the parts and controls of your iN-CAR CAM.
1. Record / OK button
Record:
Press to start or stop a recording when in video mode, or take a photo when in photo mode.
OK:
Press to confirm selection when in menus.
2. Power button
Press and to turn on / off the iN-CAR CAM.
3. Mounting point
Attached the supplied window mount here.
4. AV Out socket
For use with an AV Cable (sold separately), please contact your local Nextbase retailer to
purchase.
5. Mini USB socket
Connect the supplied car power cable or USB data cable here.
6. Polarising filter Rear Ring
Use this ring to remove / install the polarising filter on to the camera lens if necessary.
Adjust to finger tight once fitted.
7. Polarising Filter Front Ring
Rotate this ring to adjust the function of the polarising filter. See over.
Continued overleaf.
08
1 2 3
4
5
6
7
PARTS & CONTROLS (CONTD.)
Please see below to identify the parts and controls of your iN-CAR CAM.
8. RESET button
In the unlikely event the iN-CAR CAM becomes unresponsive press the RESET button to restart
the iN-CAR CAM.
9. HD OUT socket (under dust cover)
For use with the supplied High Definition cable.
10. Speaker
11. Polarizing filter
The polarising filter can be adjusted by rotating the front ring to reduce reflections from the inside
of the windscreen being captured during recording.
To set the polarising filter, place a piece of paper on your dashboard below the rear view mirror,
but away from the windscreen. With the camera turned ON, you will see the reflection of the paper
in the LCD screen. Rotate the front ring of the polarising filter to reduce reflection to the lowest
possible level. This dramatically improves the recorded image quality.
Note:
- Do not place fingers on the glass lens of the filter.
- Do not adjust the filter whilst in control of the vehicle.
12. MicroSD card slot
Insert the MicroSD card here, note that the gold contacts of the memory card are to be screen
side, when inserted.
Use the edge of a small coin (or similar object) to push the memory card in place if required.
Take care that card has ‘clicked’ into place, a second push inwards will release the memory
card.
Continued overleaf.
9
11
10 8
12
HD OUT
09
PARTS & CONTROLS (CONTD.)
Please see below to identify the parts and controls of your iN-CAR CAM.
13. Menu button
Press to open the menu within current mode, press twice to open the general settings.
14. Microphone button
Press to turn off / on the microphone, only available whilst in video mode.
15. Mode button
Press to change between video, photo or playback modes.
16. Screen
17. Down button
Press to navigate down within menus and to move to the previous file when in playback mode.
18. Microphone
19. File protect button
Press whilst recording to protect the current file in event of an emergency situation.
20. Up button
Press to navigate up within menus and to move to the next file when in playback mode.
21. Dual colour LED indicator
Car adaptor connected and iN-CAR CAM switched on:
PURPLE = Battery charging
RED = Battery charged
RED FLASHING = Recording
BLUE = Charging when iN-CAR CAM is switched OFF
16
20
21
18
19
14
13
15
17
10
IN VEHICLE INSTALLATION
Please follow the instructions below for correct installation of the iN-CAR CAM.
1. Open dust cover and insert a suitable memory card (8-32Gb Class 10) in to the iN-CAR CAM, with
the gold contacts facing the back of the device.
Push the memory card until it clicks into place.
Note:
- Do not remove or insert the memory card when the iN-CAR CAM is turned on. This may
damage the memory card.
- Use the edge of a small coin (or similar object) to push the memory card in place if required.
Take care that card has ‘clicked’ into place, a second push inwards will release the memory
card.
2. Attach the iN-CAR CAM to the supplied windscreen mount, taking care that the locking tab has
‘clicked’ firmly into place.
3. Remove the protective plastic film from the suction pad. Select the required position for the
windscreen mount and clean windscreen with a dry / clean cloth to achieve good contact between
the glass and mount.
While holding the suction cup onto the glass push the locking lever upwards to secure the
mount to the windscreen.
Please ensure that once mounted the iN-CAR CAM is located within the area of the vehicles
windscreen wipers to maintain a clear view during rainfall.
Note:
Choose a smooth glass area without painted effect.
The above diagram is for illustration purposes only.
12-24V DC
11
IN VEHICLE INSTALLATION (CONTD.)
4. The angle and position of the iN-CAR CAM can be adjusted by loosening the locking clamp and
moving as required, remembering to re-tighten the clamp.
5. Connect the car adaptor to mini-USB socket of the iN-CAR CAM and then plug the supplied car
adaptor into the 12-24Vdc outlet of your vehicle. The iN-CAR CAM will automatically power on
and start recording once power is available.
In some vehicles this will be when connections are made, for others the device will power on
once the ignition has been turned on.
Note:
- Do NOT wire the iN-CAR CAM directly to a 12V supply or damage will result.
- ONLY use the supplied car adaptor cable to supply 5Vdc to the iN-CAR CAM.
The above diagram is for illustration purposes only.
12-24V DC
12
IN VEHICLE INSTALLATION (CONTD.)
Please read and follow the notes below for the safe operation of your iN-CAR CAM within your
vehicle.
As per the installation instructions, it is advised to install the iN-CAR CAM so it does NOT obstruct
the drivers view of the road, preferably on the passenger side of the vehicle and behind the rear view
mirror. Whilst the iN-CAR CAM clearly needs to view through the windscreen in an area swept by the
windscreen wipers, the iN-CAR CAM should be installed so as not to intrude significantly within the
wiped area. A 40mm intrusion into the wiped area is the maximum recommended.
Do NOT mount the iN-CAR CAM in front of the driver, as depicted by the red area in the above
illustration.
When installing the iN-CAR CAM in a vehicle, always place the device securely against the
windscreen and where possible conceal the power cable under trim. Make sure that the iN-CAR CAM
power cable does not interfere with the drivers operating controls, such as the steering wheel, pedals
or gear levers.
Do NOT mount the iN-CAR CAM in front of an airbag field of deployment or in a position to obscure
any mirrors.
Clean the windscreen at the point of location, prior to fitting the iN-CAR CAM, also, applying some
moisture to the suction cup may be beneficial, to ensure absolute adhesion.
It is recommended NOT to operate the iN-CAR CAM whilst driving. The automatic Start-Stop
technology incorporated within the device negates any need to operate the controls whilst driving.
Adjust any settings or review recordings whilst stationery, not whilst driving.
After the preliminary SETUP has been carried out upon the iN-CAR CAM, adjust the Screen Saver
setting to 1 minute, this will blank the screen automatically shortly after starting the vehicle and
therefore the screen will NOT be a distraction in any way to the driver.
13
VIDEO MODE
5
2
14
1
3
4
6
7
8
9
10
12
13
11
17
16
15
The information given below explains the various items that are displayed on the screen when your
iN-CAR CAM is in Video mode, some items will only be displayed once the relevant function has been
selected within the Video menu, as described below.
1. WDR: remains on screen permanently as the iN-CAR CAM utilises WDR technology.
2. Recording: appears on screen and flashes red when a recording is in progress.
3. Mode: indicates the iN-CAR CAM is in Video mode.
4. Resolution: displays the current resolution.
5. Video Length: displays the length of the individual recordings in minutes.
6. Exposure: displays the exposure level.
7. Microphone: Indicates whether audio recording is switched On or Off.
8. Power: displays power source being used (external or battery).
9. GPS: the icon will flash whilst the iN-CAR CAM locates satellites. Once a stable signal is
received, the icon will stop flashing and remain on screen.
10. White Balance: displays the white balance setting.
11. Compass / Speed Display icon: Shown on screen when function has been turned on.
12. Driver Fatigue icon: Shown on screen when function has been turned on.
13. Time: current time.
14. Date: current date.
15. Recording Time: displays the length of current recording.
16. Memory Card: indicates whether a memory card is present.
17. Protected File: shown on screen when a video file has been protected by activation of the
internal G Sensor or by pressing the file protect button.
See the next page for full details of the options available within Video mode.
14
VIDEO MODE (CONTD.)
Video settings menu
The Video settings menu is accessed by pressing the menu button whilst in Video mode. Use the up
and down buttons to highlight settings and press the OK button to enter the options screen.
Select the required option and press OK to confirm, press menu once more to exit.
Note:
- Menus are not accessible during recording.
1. Resolution
Select recording resolution, this will increase or decrease the quality of the recorded video.
Default Setting: 1080P
2. Record Audio
Turn On / Off audio recording.
Default Setting: On
3. Date Stamp
Turn On / Off the date stamp shown on recorded files.
Default Setting: On
4. Speed Stamp
Turn On / Off the Speed Stamp shown on recorded files.
Default Setting: On
5. GPS Stamp
Turn On / Off both the GPS co-ordinates and speed stamp that are shown on recorded files.
When a recording is viewed using the NEXTBASE Replay both the GPS co-ordinates
and speed information remains available.
Default Setting: On
Note:
- Turning the GPS Stamp to OFF will result in the loss of ALL information being recorded to
the video file and is therefore NOT recommended.
6. NEXTBASE Stamp
Turn On / Off the NEXTBASE Stamp shown on recorded files.
Default Setting: On
7. Number Plate
Enter the registration number for your vehicle, this will then be shown on the video file.
8. G Sensor
Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which
will automatically protect the current recording in event of a collision.
Default Setting: Middle
9. Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting: 0
10. White Balance
Adjust the white balance for different light conditions.
Default Setting: Auto
15
VIDEO MODE (CONTD.)
Video settings menu continued.
11. Driver Fatigue Warning
Set the timer which will display an image of a hot beverage to serve as a reminder to take
sufficient rest when on a long journey.
Default Setting: Off
12. HUD Speed & Compass
When turned on, the screen will display current speed and a compass after the selected
period of time, press any button to return to normal viewing, this function is only available
when a GPS connection is present.
Default Setting: Off
13. Video Length
Select duration of recording length for the individual video files, the iN-CAR CAM will fill the
SD Card then loop back to the beginning, overwriting the oldest files (unless protected).
Default Setting: 3 Minutes
14. Motion Detection
Turn On / Off the motion detection function, the device will need to remain on (powered from
a permanently live 12Vdc supply) and will start a 10 second recording when a change to the
viewed scene is detected.
Default Setting: Off
Note:
- Set to Off (default) during normal driving in order to record continuously, as not all driving
will trigger close motion being detected.
15. Rotate Display
Rotate the display 180°, particularly useful should the iN-CAR CAM be mounted on the
dashboard, the iN-CAR CAM control button functions do not rotate.
Default Setting: Off
The default settings have been carefully selected to allow you to use the In-CAR CAM without the
need to change any settings.
Note:
- Within the General Settings menu which is accessed by pressing the MENU button twice, there is
a ‘Default Settings’ option to allow you to reset the iN-CAR CAM to the factory defaults, if required.
16
PHOTO MODE
ISO
AUTO
5M
M
2
7
4
3
5
6
8
9
10
11
2
1
The information given below explains the various items that are displayed on the screen when your
iN-CAR CAM is in Photo mode, some items will only be displayed once the relevant function has
been selected within the Photo menu, as described below.
1. Memory Card: indicates whether a memory card is present.
2. Quality: displays the current image quality.
3. WDR: remains on screen permanently as the iN-CAR CAM utilises WDR technology.
4. Mode: indicates the iN-CAR CAM is in Photo mode.
5. Resolution: displays the current resolution.
6. Timer: displayed on screen when self-timer is selected from within the Capture Mode options.
7. Anti-Shaking icon: remains on screen permanently as the iN-CAR CAM utilises anti-shake
technology.
8. Exposure: displays the exposure level.
9. ISO: displays the current ISO setting.
10. Power: displays power source being used (external or battery).
11. White Balance: displays the white balance setting.
See the next page for full details of the options available within Photo mode.
17
PHOTO MODE (CONTD.)
Photo settings menu
The Photo settings menu is accessed by pressing the menu button whilst in Photo mode. Use the up
and down buttons to highlight settings and press the OK button to enter the options screen.
Select the required option and press OK to confirm, press menu once more to exit.
1. Image Size
Select image size, this will increase or decrease the size of the recorded image
Default Setting: 8M
2. Image Quality
Increase or decrease the quality of the recorded image.
Default Setting: Medium
3. Date Stamp
Turn Off the date stamp shown on recorded photographs. Can also change to date only.
Default Setting: Date & Time
4. Capture Mode
Turn On / Off the timer function, when this feature has been turned on, the iN-CAR CAM will
take a photo the selected period of time after the OK button has been pressed.
Default Setting: Single
5. Colour
Adjust the colour effect of the recorded image.
Default Setting: Normal
6. White Balance
Adjust the white balance for different light conditions.
Default Setting: Auto
7. ISO
Adjust the ISO setting, the brighter the conditions the lower the ISO required.
Default Setting: Auto
8. Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting: 0
The default settings have been carefully selected to allow you to use the iN-CAR CAM without
the need to change any settings.
Note:
- Within the General Settings menu which is accessed by pressing the MENU button twice,
there is a ‘Default Settings’ option to allow you to reset the iN-CAR CAM to the factory defaults,
if required.
18
PLAYBACK MODE
The information given below explains the various items that are displayed on the screen when your
iN-CAR CAM is in Playback mode.
Video Playback
1. Video: indicates the iN-CAR CAM is displaying a video.
2. Protected File: indicates that the video file is protected.
3. File Number: displays current file number.
4. Resolution: displays the resolution that current video was recorded in.
5. Date: displays date of recording.
6. Time: displays start time current file was recorded.
7. Power: displays power source being used (external or battery).
8. Playback controls: use the iN-CAR CAM buttons as described below:
Press the OK button to play / pause.
Press the MODE button to stop playback.
Use UP button to select the previous file and to rewind during playback.
Use DOWN button to select the next file and to fast forward during playback.
See the next page for details of the options available within Playback mode.
2
7
1
3
4
5
6
12
10 9 8
1080P
15_0530_180233_006
18:02
30/05/15
MODE:
:PREV :NEXT
OK:
/
II
/
19
PLAYBACK MODE (CONTD.)
The information given below explains the various items that are displayed on the screen when your
iN-CAR CAM is in Playback mode.
Photo Playback
1. Photo: indicates the iN-CAR CAM is displaying a photo.
2. Protected File: indicates that the photo file is protected.
3. File Number: displays current file number.
4. Resolution: displays the resolution that current photo was recorded in.
5. Date: displays date of recording.
6. Time: displays start time current image was taken.
7. Power: displays power source being used (external or battery).
Playback options menu
The options menu is accessed by pressing the MENU button whilst in Playback mode. Use the up
and down buttons to highlight option and press the OK button to enter the sub-menu.
Select the required option and press OK to confirm, press MENU again to return to playback mode.
1. Delete
Used to delete the current file, also available is the option of deleting all files.
2. Protect
Used to lock or unlock the current file, also available is the option of locking / unlocking all
the files.
3. Slide Show
Used to start a slide show of images stored on the SD card, press the menu button to exit
the slide show.
6
5
4
3
2
7
1
3264 x 2448
15_0530_180235_007
18:23
30/05/15
20
GENERAL SETTINGS MENU
The General Settings menu is accessed by pressing the menu button twice, use the up and down
buttons to highlight function and press the OK button to enter the options screen.
Select the required option and press OK to confirm, press menu once more to exit.
Note:
- Menus are not accessible whilst the iN-CAR CAM is recording. Stop recording to access this menu.
1. Format SD Card
Format the inserted memory card, this will delete all content.
A good practice monthly to ensure your SD card performs to it’s full potential.
2. Language
Select preferred language, options available are as follows -
English, Français, Español, Nederlands, Sverige, Norsk, Suomi, Dansk
Default Setting: English
3. Date / Time
Adjust the date / time as required using the OK button to toggle through fields, use the UP
and DOWN buttons to set variables.
4. Time Zone / DST
The Time and Date is automatically set from the satellite signal, but can be adjusted
dependent upon your Time Zone (country) or whether Daylight Savings Time (DST) is
operational.
Default Setting: GMT
5. Speed Units
Select whether to record and display speed in KMH or MPH.
Default Setting: MPH
6. Screen Standby
Turn on the Screen Saver function, this will shut down the screen after a period of inactivity.
Press any button to re-activate the display.
Default Setting: Off
7. Beep Sound
Turn Off / On the beep sound.
Default Setting: On
8. TV Mode
Set the TV Mode as required.
Default Setting: PAL
9. TV Frequency
Set the Frequency as required.
Default Setting: 50Hz
21
GENERAL SETTINGS MENU (CONTD.)
10. Auto Power Off
Adjust the timing of the Auto Power Off function, this can be used to continue recording in
event of loss of power within in the vehicle.
Default Setting: 10 Seconds
11. Password Settings
Set the TV Mode as required.
Default Setting: PAL
12. Version
Display the version number of your device’s software.
13. Default Settings
Reset the device to the default settings.
The default settings have been carefully selected to allow you to use the iN-CAR CAM without the
need to change any settings.
22
Use the supplied USB cable to connect the iN-CAR CAM to your PC, doing so will power on the
camera with two functions available, as described below.
Use the up and down buttons to select required function and press OK to confirm selection.
- Mass Storage
- PC Camera
Using the iN-CAR CAM with a Windows PC:
Mass Storage
When Mass Storage is selected, the iN-CAR CAM screen will show the words ‘Mass Storage’ and
then take the function of an SD Card reader for your PC.
An extra drive will appear, for example ‘Removable Disk (D:)’ and you will be able to view / manage
the stored files upon the MicroSD card within the iN-CAR CAM.
PC Camera
When PC Camera is selected, the iN-CAR CAM screen will show the words ‘PC Camera’ and then
take the function of a webcam (no audio) for your PC.
Start the normal application upon your PC that uses a webcam (e.g. Skype) and select the
iN-CAR CAM which is entitled ‘CARDV’.
Note:
- Turn Off the iN-CAR CAM before disconnecting from PC.
Using the iN-CAR CAM with a Mac:
Mass Storage
When this option is selected, the iN-CAR CAM will function as a card reader for your MAC. The
‘VOLUME1’ external USB disk icon will appear on your MAC and you will be able to view / manage
stored files.
Eject the disk as you would do normally before removing the cable or turning off the iN-CAR CAM.
PC Camera
When this option is selected, the iN-CAR CAM will function as a webcam (no audio) for your Mac.
Start the normal application upon your Mac that uses a webcam (e.g. Skype) and select the
iN-CAR CAM which is entitled ‘CARDV’.
Note:
- Turn Off the iN-CAR CAM before disconnecting from Mac.
MASS STORAGE & PC CAMERA
23
The iN-CAR CAM has two methods for video and audio output:
High Definition Output
As you connect the supplied High Definition cable between the iN-CAR CAM and your television, the
iN-CAR CAM screen will blank, as all output is now visible upon your television. The external monitor
can now be used for playback and as a larger viewfinder in Photo mode. Recordings can NOT be
made in Video mode with the HD cable connected.
The controls upon the iN-CAR CAM operate for the Play / Pause, STOP, Next / Previous and Fwd /
Rev functions as shown on screen.
Standard Definition Output
As you connect an AV Cable (sold separately) between the iN-CAR CAM and your television, the
iN-CAR CAM screen will blank, as all output is now visible upon your television. All elements of the
Video, Photo and Playback are available via the AV output so you can monitor your recordings upon
a larger screen instantly (useful for when using your iN-CAR CAM as a rear facing camera while
connected to another device for viewing).
The controls upon the iN-CAR CAM operate normally.
Please contact your local NEXTBASE dealer for accessory purchases.
Note:
- An external power supply may be required when viewing recordings via the AV or HD output of the
iN-CAR CAM, e.g. using the supplied USB cable with a 5Vdc/USB adaptor, of the type typically
supplied with mobile phones.
- ENSURE that any external power sources are of the correct 5Vdc output, otherwise damage will
be caused that is not covered under the manufacturers warranty.
·
VIDEO & AUDIO OUTPUT
24
This section will guide you through the installation of the NEXTBASE Replay software, designed to
enable the viewing of recorded files as well as checking journey route / GPS data (location and speed)
and G Sensor information.
Minimum system requirements:
Operating System: Windows XP, Vista, Windows 7, Windows 8, Windows 10
Processor (CPU): Pentium III 500 MHz or Celeron at 800 MHz
Memory: 1 GB RAM
Storage: 100Mb Internal hard drive space
CD-ROM Drive: Tray / Slot Loader
Monitor/Display: 1280 x 1024
Windows NEXTBASE Replay:
Insert the supplied disk in to the CD drive, navigate to and display the contents upon the disk:
- NBDVR512G Instruction Manual (English only)
- NBDVR512G NEXTBASE Replay Software for Windows
- NBDVR512G NEXTBASE Replay Software for Mac
Note:
- The instruction manual and installation files are also available for download from the Nextbase UK
website: www.nextbase.co.uk, if required.
Should you experience any difficulties during installation please do not hesitate to
call our English speaking technical support team on +44 (0)2920 866429,
lines are open during normal business operating hours: 09:00-17:30hrs.
NEXTBASE REPLAY SOFTWARE FOR WINDOWS
25
02/06/2015 15:35:44 NBDVR512G 29MPH N 51 35 4.92 W 3 13 14.87
VIEW
HELP
Z: 1.05 MAX: 1.2
Installation:
Open the ‘NBDVR512G NEXTBASE Replay for Windows' folder and then open the folder with the
required version, based upon your preferred speed units (MPH or KMH).
Run the ‘setup.exe’, for some operating systems a security warning may appear, click ‘RUN’ to proceed.
To install this application software you need to have 'Microsoft.NET Framework 4.0 Client' installed
upon your PC. Should this not already be installed, a window will open prompting you to confirm the
automatic installation from Microsoft, as shown below.
This is normal and enables the NEXTBASE Replay software to run.
Please press 'Install' to proceed, this installation process can take some time. After installation of
'Microsoft.NET Framework 4.0 Client', you may be asked to reboot your PC in order to continue the
Driving Player Recorder software installation.
On completion of the Microsoft.NET Framework installation, the NEXTBASE Replay installation will
begin.
NEXTBASE Replay - InstallShield WizardNEXTBASE Replay - InstallShield Wizard
NEXTBASE Replay requires the following items to be installed on your computer.
Click install to begin installing these requirements.
NEXTBASE REPLAY SOFTWARE FOR WINDOWS (CONTD.)
26
If your PC already had 'Microsoft.NET Framework 4.0 Client' installed then the 'Welcome to the
InstallShield ….' window will open, as shown below.
Note:
- Depending on your operating system ‘Windows SmartScreen’ may prevent the installation
of this software due to being an ‘unrecognized app’, this is not a cause for concern.
Press ‘More info’ and then ‘Run anyway’ to continue the installation.
Press 'Next' to continue, the 'License Agreement' window will open, as shown below.
Check the 'I accept ....' button and press 'Next' to proceed.
NEXTBASE Replay - InstallShield Wizard
Welcome to the InstallShield Wizard for
NEXTBASE Replay
The InstallShield (R) Wizard will install NEXTBASE Replay
on your computer. To continue, click Next.
WARNING: This program is protected by copyright law
and international treaties.
Next > Cancel< Back
NEXTBASE Replay - InstallShield Wizard
Next >
I accept the terms in the license agreement
I do not accept the terms in the license agreement
InstallShield
Cancel< Back
Print
License Agreement
Please read the following license agreement carefully.
To add your own license text to this dialog, specify your license agreement file in the Dialog editor.
1. Navigate to the User Interface view.
2. Select the License Agreement dialog.
3. Choose to edit the dialog layout.
4. Once in the Dialog editor, select the Memo Scrollable Text control.
5. Set FileName to the name of your license agreement RTF file.
After you build your release, your license text will be displayed in the License Agreement dialog.
NEXTBASE REPLAY SOFTWARE FOR WINDOWS (CONTD.)
27
The 'Customer Information’ window will open, as shown below.
If required enter your preferred User Name and Organization, this is optional and fields can be
left blank.
Press 'Next' to proceed, the 'Ready to Install the Program' window will open, as shown below.
Click ‘Install’ to begin the installation.
NEXTBASE Replay - InstallShield Wizard
InstallShield
Install Cancel< Back
Ready to Install the Program
The wizard is ready to begin installation.
If you want to review or change any of your installation settings, click Back. Click Cancel to exit
the wizard.
Current Settings:
Setup Type:
Typical
Destination Folder:
C:\Program Files (x86)\NEXTBASE\NEXTBASE Replay
User Information:
Name:
Company:
NEXTBASE Replay - InstallShield Wizard
Next > Cancel< Back
Customer Information
Please enter your information
User Name:
Organization:
InstallShield
NEXTBASE REPLAY SOFTWARE FOR WINDOWS (CONTD.)
28
Once installation is complete the 'InstallShield Wizard Completed' window will open, as shown
below.
Installation now is complete, press 'Finish' to close the InstallShield Wizard window.
The NEXTBASE Replay icon will now be available on your desktop.
Note:
- For some operating systems additional / different steps may be required.
- Some anti-virus software may consider the installation of this software as a threat, this is
normal and not a cause for concern, please toggle off the anti-virus software, or choose to
allow the installation to continue.
NEXTBASE Replay - InstallShield Wizard
InstallShield Wizard Completed
InstallShield Wizard has successfully installed NEXTBASE
Replay. Click Finish to exit the wizard.
Finish
Cancel< Back
NEXTBASE REPLAY SOFTWARE FOR WINDOWS (CONTD.)
29
Using the NEXTBASE Replay software:
To use the NEXTBASE Replay software to view your recorded files, you need to add the files to the
players ‘file list’. This is a very simple process, but first you need to have the files available upon your
computer.
This can be done in two different ways, from the iN-CAR CAM using the supplied USB cable or from
the memory card using a card reader.
Connect the iN-CAR CAM to your computer using the supplied USB cable, the iN-CAR CAM will
power on automatically, select Mass Storage by pressing ‘OK’ on your iN-CAR CAM.
Remove the MicroSD Card from your iN-CAR CAM and using a suitable MicroSD adaptor insert
it directly to the card reader on your PC.
Close any pop up messages and/or any media players which may automatically open when video or
photo files stored upon a memory card are detected. Open the NEXTBASE Replay software using
the shortcut on your desktop.
To add videos for viewing with the NEXTBASE Replay click on the ‘+ ADD’ button, this will open a
new window allowing you to locate the recordings, see image below.
Using either method (mass storage or memory card), the iN-CAR CAM will be listed as a Removable
Disk, this contains a folder named ‘NBDVR’ which contains the video files.
Highlight the required video files and click ‘Open’, this will add the selected files to the NEXTBASE
Replay file list.
Note:
- Avoid copying large quantities of files in one go (i.e. the full memory card in one go), as adding
the files to the play list can take some time depending on file size and/or computer performance.
- Some early Windows operating systems may require installation of video codec software to
enable video playback, these codecs are within the VideoLAN multimedia player. This is a free
and open source cross-platform multimedia player available for download from:
http://www.videolan.org
Playback of the first recording within the file list will begin automatically, see the following pages for
further information on using the NEXTBASE Replay.
NEXTBASE REPLAY SOFTWARE FOR WINDOWS (CONTD.)
30
NEXTBASE Replay
‘ADD’
button
00:00:0000:00:00
0
0
0
0
0
0
X 0:00 Y 0:00 Z 0:00
Name
Open Cancel
Windows video le (.mov)
File name:
Organize New folder
This PC Removable Disk (F:) NBDVR VIDEO
This PC:
Desktop
Documents
Downloads
Music
Pictures
Videos
Windows OS (C:)
Removable Disk (G:)
NBDVR
VIDEO
2015_0602_153815_008.MOV
2015_0602_153818_009.MOV
2015_0602_153812_007.MOV
Open
VIEW
HELP
NEXTBASE REPLAY SOFTWARE FOR WINDOWS (CONTD.)
Features & Controls
The key below explains the various information displayed within the NEXTBASE Replay software
when using a Windows platform.
1. Settings
FILE: Browse for files, change settings for units of speed and language.
MAP: Open and close the map window.
ABOUT: NEXTBASE Replay information.
2. Playback window
Double-click on the playback window to enter full screen mode, double-click once more to return
to normal view.
3. Playback controls
Control the playback of recordings: play & pause, forward (step forward 10 seconds), rewind
(step backward 10 seconds) and adjust the volume.
4. Journey information
Various information for the current recording is available here, such as: speed , direction of travel,
G Sensor data and co-ordinates.
5. NEXTBASE Replay controls
Screen capture, this will create a still image from the playback window.
Open screen capture folder.
Open / Close the Map window.
Open the NEXTBASE Replay settings window, to adjust language and speed units.
.
31
3
2
6
1
02/06/2015 15:35:44 NBDVR512G 29MPH N 51 35 4.92 W 3 13 14.87
4
10
9
8
5
11
7
VIEW
HELP
Z: 1.05 MAX: 1.2
NEXTBASE REPLAY FOR WINDOWS (CONTD.)
6. Journey statistics
Displays maximum speed, average speed and total distance travelled of the recordings that
have been selected (ticked) within the file list.
7. Add / Delete files
Used to add recordings to the file list and delete recordings from the file list.
8. Map
Displays the route travelled on map, only available when the video was recorded when a
satellite connection was present.
Note:
- The route will only be shown when the recording has been selected (ticked) within the file list.
- Multiple routes on the will be seen on the map when more than one recording has been
selected.
- A working internet connection MUST be available upon the PC for NEXTBASE Replay to be
able to show the map, as this is downloaded from Google.
9. Vehicle marker
Shows the location of the vehicle within the journeys route.
10. Route
Shows the route of the current recording.
11. File list
Lists recordings that have been added to the NEXTBASE Replay’s file list.
32
3
2
6
1
02/06/2015 15:35:44 NBDVR512G 29MPH N 51 35 4.92 W 3 13 14.87
4
10
9
8
5
11
7
VIEW
HELP
Z: 1.05 MAX: 1.2
NEXTBASE REPLAY SOFTWARE FOR MAC
This section will guide you through the installation of the NEXTBASE Replay software, designed to
enable the viewing of recorded files as well as checking journey route / GPS data (location and speed)
and G Sensor information.
Minimum system requirements:
OS X 10.7 and above
Mac NEXTBASE Replay:
Insert the supplied disk in to the CD drive, navigate to and display the contents upon the disk:
- NBDVR512G Instruction Manual (English only)
- NBDVR512G NEXTBASE Replay Software for Windows
- NBDVR512G NEXTBASE Replay Software for Mac
Note:
- The instruction manual and installation files are also available for download from the Nextbase UK
website: www.nextbase.co.uk, if required.
Should you experience any difficulties during installation please do not hesitate to
call our English speaking technical support team on +44 (0)2920 866429,
lines are open during normal business operating hours: 09:00-17:30hrs.
33
02/06/2015 15:35:44 NBDVR512G 29MPH N 51 35 4.92 W 3 13 14.87
NEXTBASE Replay
Map
AboutOpen
Z: 1.05 MAX: 1.2
NEXTBASE REPLAY SOFTWARE FOR MAC (CONTD.)
Installation
Insert the supplied Disk into your disk drive, the disk will appear on your desktop as ‘NBDVR’. Open
the disk by double-clicking upon it, to display the contents, as shown below.
Open the 'NBDVR512G NEXTBASE Replay for Mac' folder and then open the folder with the required
version based upon your preferred speed units (MPH or KMH).
Should your Mac not have disk drive, then please download the required NEXTBASE Replay
software from the Nextbase website. The software is in a compressed (.zip) folder, free
de-compression applications are readily available, for example 'The Unarchiver' available from
the Mac Appstore. Once the .zip folder has been uncompressed the full folder will appear in
your downloads folder.
34
NEXTBASE Replay for Mac NEXTBASE Replay for
Windows
NBDVR512G Instruction
Manual (English).pdf
NBDVR
NBDVR
NBDVR
Finder File Edit View Go Window Help
NEXTBASE Replay for
Windows
NBDVR512G Instruction
Manual (English).pdf
NEXTBASE Replay for Mac
NBDVR
NBDVR
NEXTBASE Replay for Mac
NBDVR
Finder File Edit View Go Window Help
NEXTBASE Replay for Mac (KMH)
NEXTBASE Replay for Mac (MPH)
Name Date Modified Size
Kind
Folder
Folder
Today 23:22
Today 23:22
NEXTBASE Replay for Mac
NBDVR
Once you have selected the required version the NEXTBASE Replay app will be available, as shown
below.
The app can be opened from within this folder or you may wish to make copy and place it on to your
desktop, as shown below.
To open the NEXTBASE Replay app simply double-click on the icon.
NEXTBASE REPLAY SOFTWARE FOR MAC (CONTD.)
35
NBDVR
NEXTBASE
Replay
Finder File Edit View Go Window Help
Name Date Modified Size
Kind
Name Date Modified Size
Kind
NEXTBASE Replay
Today 23:22 947 KB Application
NBDVR
NEXTBASE Replay for Mac NEXTBASE Replay for Mac (KMH)
NBDVR
NEXTBASE Replay for Mac (KMH)
NEXTBASE Replay for Mac (MPH)
Folder
Today 23:22
Folder
Today 23:22
NBDVR
NEXTBASE Replay for Mac
NEXTBASE Replay for Mac (KMH)
NEXTBASE Replay for
Windows
NBDVR512G Instruction
Manual (English).pdf
NEXTBASE Replay for Mac
NBDVR
Finder File Edit View Go Window Help
NEXTBASE Replay
Name Date Modified Size
Kind
Name Date Modified Size
Kind
NEXTBASE Replay for Mac (KMH)
Folder
Today 23:22
NEXTBASE Replay for Mac (MPH)
Folder
Today 23:22
NEXTBASE Replay for Mac
NBDVR
Today 23:22 947 KB Application
NBDVR
NEXTBASE Replay for Mac NEXTBASE Replay for Mac (KMH)
NBDVR
NEXTBASE Replay for Mac (KMH)
NEXTBASE Replay for
Windows
NBDVR512G Instruction
Manual (English).pdf
NEXTBASE Replay for Mac
NEXTBASE REPLAY SOFTWARE FOR MAC (CONTD.)
Using the NEXTBASE Replay:
To use the NEXTBASE Replay software to view your recorded files, you need to add the files to the
players ‘file list’. This is a very simple process, but first you need to have the files available upon your
computer.
This can be done in two different ways, from the iN-CAR CAM using the supplied USB cable or from
the memory card using a card reader.
Connect the iN-CAR CAM to your computer using the supplied USB cable, the iN-CAR CAM will
power on automatically, select Mass Storage by pressing ‘OK’ on your iN-CAR CAM.
Remove the MicroSD Card from your iN-CAR CAM and using a suitable MicroSD adaptor insert
it directly to the card reader on your PC.
Close any pop up messages and/or any media players which may automatically open when video or
photo files stored upon a memory card are detected. Open the NEXTBASE Replay software using
the shortcut on your desktop.
To add videos for viewing with the NEXTBASE Replay click on the ‘+ ADD’ button, this will open a
new window allowing you to locate the recordings, see image below.
Using either method (mass storage or memory card), the iN-CAR CAM will be listed as ‘VOLUME1',
the folder within named ‘NBDVR’ contains the video files.
Highlight the required video files and click ‘Open’, this will add the selected files to the NEXTBASE
Replay file list.
Note:
- Avoid copying large quantities of files in one go (i.e. the full memory card in one go), as adding
the files to the play list can take some time depending on file size and/or computer performance.
Click on a file within the file list window to start playback, see the following pages for further
information on using the NEXTBASE Replay.
36
NEXTBASE Replay
0
00:00:00 00:00:00
0
0
X 0:00 Y 0:00 Z 0:00
0
0
0
Cancel
Open
Open
VIDEOVIDEO
Favourites
Devices
Macintosh HD
All My Files
iCloud Drive
Applications
Desktop
Documents
WORK
Music
Pictures
Movies
Remote Disk
VOLUME1
‘ADD’
button
NBDVR VIDEO
Map
AboutOpen
NEXTBASE REPLAY SOFTWARE FOR MAC (CONTD.)
Features & Controls
The key below explains the various information displayed within the NEXTBASE Replay software
when using a Mac platform.
1. Settings
Open: Browse for files, change settings for units of speed and language.
Map: Open and close the map window.
About: NEXTBASE Replay information.
2. Playback window
3. Playback controls
Control the playback of recordings: rewind (step backward 10 seconds), play & pause,
forward (step forward 10 seconds) and adjust the volume.
4. Journey information
Various information for the current recording is available here, such as: speed , direction of travel,
G Sensor data and co-ordinates.
5. NEXTBASE Replay controls
Screen capture, this will create a still image from the playback window.
Open screen capture folder.
Open / Close the Map window.
Open the NEXTBASE Replay settings window, to adjust language and speed units.
.
37
3
2
6
1
02/06/2015 15:35:44 NBDVR512G 29MPH N 51 35 4.92 W 3 13 14.87
4
10
9
8
5
11
7
NEXTBASE Replay
Map
AboutOpen
Z: 1.05 MAX: 1.2
NEXTBASE REPLAY SOFTWARE FOR MAC (CONTD.)
6. Journey statistics
Displays maximum speed, average speed and total distance travelled of the recordings that
have been selected (ticked) within the file list.
7. Add / Delete files
Used to add recordings to the file list and delete recordings from the file list.
8. Map
Displays the route travelled on map, only available when the video was recorded when a
satellite connection was present.
Note:
- The route will only be shown when the recording has been selected (ticked) within the file list.
- Multiple routes on the will be seen on the map when more than one recording has been
selected.
- A working internet connection MUST be available upon the PC for NEXTBASE Replay to be
able to show the map, as this is downloaded from Google.
9. Vehicle marker
Shows the location of the vehicle within the journeys route.
10. Route
Shows the route of the current recording.
11. File list
Lists recordings that have been added to the NEXTBASE Replay’s file list.
38
2
6
1
02/06/2015 15:35:44 NBDVR512G 29MPH N 51 35 4.92 W 3 13 14.87
4
10
9
8
5
11
7
NEXTBASE Replay
Map
AboutOpen
Z: 1.05 MAX: 1.2
3
TROUBLE SHOOTING
Video Image is blurred.
I can not insert the
Micro SD card.
I cannot remove the
Micro SD card.
Video files can not be played.
Video file playback is jumpy.
Playback upon the Driver
Recorder Player is jumpy.
The sound is not synchronised
with video during playback.
Video has no sound.
Photograph is blurred.
I can only record a few
minutes of video on my
Micro SD card.
Mass Storage or PC Camera
function does not work.
The sucker will not stay in
place upon my windscreen.
Adjust the polarising filter, as described in the “Parts & Controls”
section. Clean the polarising filter, lens and clean the windscreen!
Micro SD card are very small and require delicate use. Align the
card with the diagram shown upon the device and insert the card
until you feel a slight spring resistance. You now need to push the
card, using your finger nail, until you hear and feel a small latch.
Release pressure and the card will stay retained within the device.
Use the edge of a small coin if you have difficulty.
With the card previously installed, you now need to push the card
further inwards slightly, using your finger nail, until you hear and
feel a small latch.
Use the edge of a small coin if you have difficulty.
Release pressure and the card will spring out sufficiently for you to
take hold of it.
The video files from the iN CAR CAM are in MOV format and may
not be compatible with your PC if suitable playback software is not
installed.
Install the supplied Driver Recorder Player software and the
additional Codecs if necessary.
Remove the SD card and reformat to remove non-contiguous files.
For best recording use a branded class 10 type (30MB/s) SD card
of 8 to 32GB recommended size. Recommended video playback
software is the supplied Driver Recorder Player Playback.
PC may not be sufficient for the playback task, try an different PC.
Copy video files onto the PC / Mac for playback.
It is not recommended to use the iN-CAR CAM as a card reader
via the USB Cable for playback purposes.
The Codecs upon your PC may not be compatible or the latest
standard.
Download the latest Codecs from: http://www.nextbase.co.uk
The Codecs upon your PC may not be compatible or the latest
standard.
Download the latest Codecs from: http://www.nextbase.co.uk
Ensure that “Record Audio” setting is turned ON within the
Video Menu.
Hold the camera still whilst taking the photo. Please be aware the
photo is taken around 1 second after the shutter noise is heard.
Change the recording size (Loop recording function) to a smaller
size.
Increase the size of the MicroSD card. Max 32GB.
The Mass storage function will work on both Windows and Mac,
however the PC camera is only Windows compatible. Restart the
PC, as this may be required for the necessary driver to be loaded
correctly. Disconnect and reconnect the In-CAR CAM.
Contact NEXTBASE for the required driver.
Ensure that the protective cover (plastic film) has been removed
from the suction pad.
Moisten the sucker slightly before affixing upon the windscreen.
Ensure that the lever is fully pushed towards the windscreen. Make
sure that the glass is smooth and clean. Do not stick to glass that
has any non-smooth effect or paint whatsoever. Affix to the glass
firmly and then push the lever to the full extent.
PROBLEM SOLUTION
39
TROUBLE SHOOTING (CONTD.)
My iN-CAR CAM shuts down
by itself after a while.
No power to my iN-CAR CAM,
but it works upon my PC.
The SD card in my
iN-CAR CAM can not be read.
I can't delete files on my
SD card within the
iN-CAR CAM.
The screen blanks after a few
minutes upon my
iN-CAR CAM.
I get the message “Cluster
size wrong. Please format
SD card” on screen.
The NEXTBASE Replay map
will not open.
The iN-CAR CAM can not
lock onto satellite.
The battery only last 30
seconds.
The battery only lasts 6
minutes.
I get the message “Card Error”
on screen.
I get the message “Card Full”
on screen.
The AV Out from my
iN-CAR CAM just buzzes on
my TV.
Either the battery has gone flat, or there is no power to the
iN-CAR CAM and the AutoPower Off period (which is in the
SETUP menu) has been triggered.
The cigarette power cable is not working. Inspect the fuse in the
Car Power plug. Replacement fuse = 2A 20mm type. If the fuse is
found to be blown, inspect the power cable for damage which
may have caused the fuse blow.
Use a good quality branded SD card between 4GB and 32GB and
format the card from within the SETUP menu of the iN-CAR CAM.
Check to see if these files are 'protected', if so please follow
instructions to 'un-protect'.
The screen saver is set to ON. Change settings to OFF if required.
Default setting is off.
The SD card has been formatted in another device and the
Cluster Size is not compatible. Simply use the MENU, SETUP
option to re-format the SD card from within the iN-CAR CAM.
NEXTBASE Replay requires a working internet connection to open
the map. Enable the internet connection or switch off any firewalls /
internet security which may be blocking internet access.
After power on and with the device mounted with clear view of the
sky it can take up to 10 minutes to find the three satellites required
to achieve a stable signal. Reception can also be affected by
atmospheric conditions and the proximity of buildings / trees
obscuring the sky.
With the vehicle ignition turned on, please reconnect car adaptor
and leave the iN-CAR CAM to charge.
Charging takes approximately 90 minutes.
This is normal, the battery design allows the 'Auto Power Off'
feature to function in event of power loss within the vehicle. It is
not intended as an alternative power source to replace the
supplied car adaptor.
The SD card has become unuseable by the iN-CAR CAM.
Remove useful files using your PC and then perform a “FORMAT”
upon the SD card from within iN-CAR CAM the SETUP menu.
The SD card has become full as the Loop recording function is set
to OFF. Set the “Loop Recording” function to 3 mins (default) to
enable the cycle recording function and automatic deletion of older
files.
Ensure that the AV cable is correct. Use a stereo 3.5mm jack plug
where the tip is the video and the ring is the audio signal.
PROBLEM SOLUTION
40
TROUBLE SHOOTING (CONTD.)
I have turned on ‘motion
detection’ and now can’t stop
the recording.
When I press the MENU
button nothing happens.
Downloading files from
www.nextbase.co.uk
using Google Chrome results
in a Malicious Software
message.
The date & time on my
iN-CAR CAM do not adjust for
Daylight Savings time
(Summer time).
After I manually set the Time
correctly upon my
iN-CAR CAM, it adjusts itself
by one hour to the wrong time
shortly afterwards.
Unresolved issues.
The iN-CAR CAM will start a recording whenever motion is
detected, when function is to be turned off firstly shutdown the
iN-CAR CAM and remove the SD card, this will avoid recording
being activated accidentally. Switch back on the and
within the setting menu and turn off the ‘Motion Detection’.
This is normal during recording. Stop the recording before
pressing the MENU button.
If recording re-starts before you can press MENU, then see
the Motion Detection section above.
This is not a cause for concern, simply go to the settings within
Google Chrome and turn off the malicious software protection
temporarily to download and install the software.
Reinstate previous Google Chrome settings thereafter.
Correct. Adjust the Daylight Savings Time (Summer Time) option
manually from with the SETUP. Go to Time Zone / DST and select
GMT +1.00 for British Summer Time, as an example.
The iN-CAR CAM is obtaining the correct date and Time from the
Satellite and this is always Greenwich Mean Time (GMT). If you
are in a country which uses a different time zone, or need to set for
Daylight Savings Time (Summer Time), adjust the option manually
from with the SETUP. Go to Time Zone / DST and select
GMT +1.00 for British Summer Time, as an example.
Reset the iN-CAR CAM to the default settings within the
Setup Menu and try again.
Should the problem persist call the helpline (02920) 866429
or email: support@nextbase.co.uk
PROBLEM SOLUTION
41
NOTES
42
NBDVR512G-IM-ENG-R02
www.nextbase.co.uk
… 10 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nextbase In-Car Cam 512G Ultra bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nextbase In-Car Cam 512G Ultra in de taal/talen: Engels als bijlage per email.

De handleiding is 16,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Nextbase In-Car Cam 512G Ultra

Nextbase In-Car Cam 512G Ultra Gebruiksaanwijzing - Nederlands - 50 pagina's

Nextbase In-Car Cam 512G Ultra Gebruiksaanwijzing - Deutsch - 50 pagina's

Nextbase In-Car Cam 512G Ultra Gebruiksaanwijzing - Français - 50 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info