19
• Make sure that the router has power and that the WiFi LED is lit.
• Close and reopen the browser to make sure that the browser
does not cache the previous page.
• Type http://routerlogin.net.
• If the computer is set to a static or fixed IP address (this is
uncommon), change it to get its IP address from the router.
Restore Factory Settings
To return the router to its factory settings:
1. Use a sharp object such as a pen or a paperclip to press and
hold the Restore Factory Settings button on the back of the
router for over 5 seconds until the Power LED blinks amber.
2. Release the Restore Factory Settings button, and wait for the
router to reboot.
The factory default settings are restored.
ReadySHARE Access
ReadySHARE lets you access and share the HDD inside the router or
a USB drive connected the router USB port. (If your USB device has
special drivers, it is not compatible.) When you connect the USB
device, it might take up to 2 minutes before it is ready for sharing.
Note: If your USB device has a power supply, you must use it when
you connect the USB device to the router.
To access the internal HDD or USB device from Windows:
The readyshareconnect.exe file is available to download here:
www.netgear.com/readyshare. You can use any of these methods:
• Select Start > Run. Enter \\readyshare in the dialog box and click
OK.
• Open a browser and enter \\readyshare in the address bar.
