710464
19
Verklein
Vergroot
Pagina terug
1/79
Pagina verder
a. If you changed the IP address settings of your computer in Step 4, reinstate the IP address settings
that your computer was using before.
This step assumes that the access point is now connected to the same router or
network that your computer was connected to before you connected it with an
Ethernet cable to the access point. For you to configure the access point, the IP
addresses of your computer and the access point must be in the same IP subnet.
This requirement does not apply if you log in to the access point over a WiFi
connection.
Note
b. Open a web browser from the computer or WiFi device that is connected to the access point.
c. In the address field of the web browser, enter the static IP address that you configured on the access
point.
d. When prompted, enter admin for the user name and password for the password.
The access point web management interface displays.
11. Change the settings as needed.
For more information, see the sections in this manual.
Log In to the Access Point After Setup to View or Change
Settings
After you set up the access point, you can view or change the settings for the access point.
To log in to the access point web management interface:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
If you did not enable the access point’s DHCP client or configure a static IP address
when you connected the access point to your router or network (see Connect the
Access Point to Your Router or Network on page 12), the access point uses its default
IP address of 192.168.0.100. In this situation, you must temporarily change the IP
address on your computer to 192.168.0.210 with subnet mask 255.255.255.0 so that
the IP addresses of your computer and the access point are in the same IP subnet.
This requirement does not apply if you log in to the web management interface over
a WiFi connection.
Note
2. Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter
the default access point IP address 192.168.0.100.
A login window opens.
3. Enter the access point user name and password.
Install and Access the Access Point in Your Network
19
802.11ac Wireless Access
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Netgear WAC104 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Netgear WAC104 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info