Operating the appliance en
23
Eco drying
If you have selected the Eco 50°
programme, the door opens
automatically when the programme
ends. This ensures a particularly
economical drying result. You can
switch Eco drying on or off.
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button ` until
•:‹... is indicated on the digital
display.
4. Release both buttons.
The LED for button # flashes and
the digital display h displays the
factory setting •:‹….
5. Press programme button # until
the factory set value ©:‹‚ is
indicated on the digital display h.
To change the setting:
1. By pressing the 3 button, you can
switch Eco drying on ©:‹‚ or off
©:‹‹.
2. Press START button `.
The set value is saved.
3. Close the door.
Notes
Eco drying is activated only in
conjunction with the Eco 50°
programme.
Eco drying is deactivated when
– intensive drying is switched on.
– the Eco 50° programme has
been selected in conjunction with
one or more additional functions.
– the electronic childproof lock *
has been switched on.
* depending on model
Optical display while
the programme is running *
Optical display while the programme is running
* depending on model
While the programme is running,
an optical display is indicated
on the floor under the appliance door.
If the base panel is pulled forwards
or if the appliance is installed at eye-
level with flush furniture front, the display
is not visible.
Possible settings of the optical
display:
†:‹‚ is set at the factory.
To change the setting:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button `
until •:‹.... is indicated on the digital
display.
4. Release both buttons.
The illuminated display of the
button # flashes.
5. Keep pressing programme
button # until the previously set
value, e.g. †:‹‚, is indicated on the
digital display h †:‹... (for the
optical display).
6. Keep pressing programme
button 3 until the required value,
e.g. †:‹ƒ, is indicated on the digital
display h.
7. Press START button `.
The set value is saved.
8. Close the door.
†:‹‹ The display is switched off.
†:‹‚ Programme, timer programming,
remaining time, end of programme
and, if required, low water level are
displayed.
†:‹ƒ Same as †:‹‚. Other programme
information is also displayed,
e.g. the symbol for half load §
or glass protection system
active W.
