en Overview of programmes
20
* The Intensive Smart 45° programme
offers outstanding cleaning results even
if utensils are heavily soiled. And this
with an energy saving of up to 25%
compared with the Intensive 70°
programme.
To benefit from these advantages,
please use modern detergents which
deploy their full cleaning power
from 45 °C. These detergents are
identified by the manufacturers
accordingly.
Programme selection
You can select a suitable programme
according to the type of utensils and
degree of soiling.
Information for test institutes
Test institutes receive the information for
comparability tests (e.g. according to
EN60436).
These are the conditions for conducting
the tests, however these are not the
results or consumption values.
Request by e-mail to:
dishwasher@test-appliances.com
The product number (E no.) and the
production number (FD) are required
which you can find on the rating plate
9: on the appliance door.
TurboSpeed 20 min.
TurboSpeed 20 min. -
especially quick rinsing
programme with one-off
preheating*
* depending on model
The appliance is heated up once
(approx. 25 min.), then the appliance is
loaded and several quick rinse cycles
(20 min. each) can run in succession.
Note
Detergent tablets are not suitable for
this programme, as the detergent
cannot completely dissolve within
the short time. Therefore always use
powder detergents and ensure that
the salt and rinse aid dispensers are
always filled and set to the correct value
(see chapters entitled “Water softening
system” and “Rinse aid”).
Please read the operation carefully,
the programme differs from the other
programmes:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Select programme TurboSpeed 20
min.
• flashes on the digital display h
(• = Heating phase).
4. Press START button `.
5. Close the door.
The heating up phase of the empty
appliance starts. A light spot * or • *
(• = Heating phase) shines on the
floor. If the appliance is loaded
before the heating phase,
the duration of the heating phase is
extended.
6. As soon as the light spot * on the
floor flashes or p * (p = Load)
appears, open the appliance. p
flashes on the digital display h
(p = Load).
Warning! Interior is hot.
