Steam en
17
Note: If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank.
Cancelling steam addition
1. Touch the Ž touch button to cancel the addition of
steam early.
2. Touch the set added steam in the bottom line.
3. On the display, swipe to the left or right to select
"Off".
4. Touch the 8 symbol to apply the setting.
Note: The operation continues without adding steam.
Cancelling appliance operation
Press and hold the # touch button until the appliance
operation is cancelled.
Finishing
Touch the # touch button to switch the appliance off.
Dough proving setting
Dough will prove considerably more quickly using the
"Dough proving Œ" heating mode than at room
temperature and does not dry out.
There are two levels available for the Dough proving
setting. Use the information in the tables to select the
appropriate level. ~ "Tested for you in our cooking
studio" on page 37
Note: If the water tank runs dry during operation with
the Dough proving setting, operation is interrupted. Fill
the water tank.
Starting
1. Touch the # touch button.
2. Fill the water tank.
Note: Only switch on the Dough proving setting
once the cooking compartment has completely
cooled down (to room temperature).
3. Swipe to the left or right to select "Dough proving".
4. Touch "1" in the bottom line.
5. Swipe to the left or right to select the required level.
6. Touch the 8 symbol to apply the setting.
7. Touch "+" in the bottom line.
8. Swipe to the left or right to select the required
duration.
9. Touch the 8 symbol to apply the setting.
10. Touch the # touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the 0 touch button to end the
audible signal.
Cancelling
Press and hold the # touch button until the appliance
operation is cancelled.
Finishing
Touch the # touch button to switch the appliance off.
Reheating
With the "Reheat ¨" heating mode, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
Note: If the water tank runs dry during operation with
the Reheat setting, operation is interrupted. Fill the
water tank.
Starting
1. Touch the # touch button.
2. Fill the water tank.
3. Swipe to the left or right to select "Reheat ¨".
4. Touch the temperature in the bottom line.
5. Swipe to the left or right to select the required
temperature.
6. Touch the 8 symbol to apply the setting.
7. Touch "+" in the bottom line.
8. Swipe to the left or right to select the required
duration.
9. Touch the 8 symbol to apply the setting.
10. Touch the # touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the 0 touch button to end the
audible signal.
Cancelling
Press and hold the # touch button until the appliance
operation is cancelled.
Finishing
Touch the # touch button to switch the appliance off.
Filling the water tank
The water tank is located behind the control panel.
Before starting an operation with steam, open the
control panel and fill the water tank with water.
Make sure that you have set the water hardness range
correctly. ~ "Basic settings" on page 21
:Warning
Risk of injury and risk of fire!
Only fill the water tank with water or with the descaling
solution that is recommended by us. Do not pour any
flammable liquids (e.g. alcoholic drinks) into the water
tank. Due to hot surfaces, vapours from flammable
liquids may catch fire in the cooking compartment
(explosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
:Warning
Risk of burns!
The water tank may heat up while the appliance is in
operation. Wait until the water tank has cooled down
after the previous appliance operation. Remove the
water tank from the water tank recess.
