170484
228
Verklein
Vergroot
Pagina terug
1/266
Pagina verder
User Guide
228
www.nec-computers.com
Error Messages
This section describes the POST error codes and messages.
POST Error Codes and Messages
Whenever a recoverable error occurs during POST, BIOS displays a message on the
video display screen and causes the speaker to beep as the message appears. BIOS also
issues a beep code (one long tone followed by two short tones) during POST if the
video configuration fails or if an external ROM module does not have the correct
checksum. The BIOS indicates errors by writing an error code to the PS/2-standard log-
ging area in the Extended BIOS Data Area, and by displaying a message on the screen,
which is sometimes preceded by the POST Error Code. The error code will also be
logged to the Event Logging area.
POST Error Codes and Messages is a list of the error codes and messages written at the
start of each POST test. The table below lists the beep codes issued for each POST test.
The devices associated with the POST error codes are shown in subsection POST Error
Code Hardware References that follow.
Table 20: Memory Errors And Messages
On-screen error
message
Description / Action to be taken
Gate20 Error The BIOS is unable to properly control the mother-
board’s Gate A20 function, which controls access of
memory over 1 MB. This may indicate a problem with
the motherboard.
Multi-Bit ECC Error This message will only occur on systems using ECC
enabled memory modules. ECC memory has the abil-
ity to correct single-bit errors that may occur from
faulty memory modules.
A multiple bit corruption of memory has occurred,
and the ECC memory algorithm cannot correct it. This
may indicate a defective memory module.
Parity Error Fatal Memory Parity Error. System halts after display-
ing this message.
RAM R/W test failed This message is displayed by the AMIBIOS8 when
the RAM read/write test fails.
CMOS Memory Size
Wrong
The base memory (memory below 1MB) size that is
reported in the CMOS (offset 15h) mismatches with
the actual size detected. This condition may occur
when the hole is set at 512K base memory or when
CMOS is corrupted.
228

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nec express5800 tm800 nl bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nec express5800 tm800 nl in de taal/talen: Engels als bijlage per email.

De handleiding is 2,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info