6
The oven light is on only when the microwave
oven is operating.
The oven door can be opened at any time
during operation by touching the door release
button on the control panel. The oven will
automatically shut off.
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
When the oven is plugged in, the display will
show “HAVE A NICE COOKING TIME PRESS
CLEAR” and “CLEAR” blinks three times.
Time Clock returns to the present time when
the cooking time ends.
When the PAUSE/CLEAR pad is touched
during the oven operation, the oven stops
cooking and all information is retained. To erase
all information (except the present time), touch
the PAUSE/CLEAR pad once more. If the oven
door is opened during the oven operation, all
information is retained.
If the START pad is touched and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely. The oven will not
start cooking until the door is completely closed
or the program has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 10 Amp, 240V, AC 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
WATTAGE OUTPUT CHART
• The power-level is set by pressing the TIME COOK pad. The chart shows the power level, display and
the percentage of power.
Touch TIME COOK pad Power Level (Display) Approximate Percentage of Power
once HIGH 100%
twice PL-9 90%
3 times PL-8 80%
4 times PL-7 70%
5 times PL-6 60%
6 times PL-5 50%
7 times PL-4 40%
8 times PL-3 30%
9 times PL-2 20%
10 times PL-1 10%
11 times PL-0 0%
Make sure the oven is properly installed
and plugged into the electrical outlet.
