493531
13
Verklein
Vergroot
Pagina terug
1/168
Pagina verder
with SmartS
2006
Upgrade to 2006 SE maps
Map Installation Guide
iCN 700 Series
en
da
de
es
fr
fc
it
nl
sv
2
19
36
55
73
92
111
130
149
© 2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of
Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand.
Navman is part of the Brunswick Corporation, headquarters Chicago, IL. All rights reserved.
The software contains proprietary information of Navman; it is provided under a licence agreement
containing restrictions on use and disclosure and is also protected by copyright law. Reverse
engineering of the software is prohibited.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior
written permission of Navman.
Back-On-Track, Drive-Away, Smart5 and Turn-by-Turn are either registered trademarks or
trademarks of Brunswick New Technologies Asia Pte Limited and are used under licence by Navman
New Zealand. All rights reserved.
Microsoft Windows 2000 SP4 and XP SP2, Microsoft Internet Explorer and ActiveSync are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. All rights reserved.
Adobe and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries. All rights reserved.
Location Identifiers © 2005 International Air Transport Association.
All other trademarks and registrations are the property of their respective owners.
Published in New Zealand.
iCN 700 Series - Map Installation Guide
3
Disclaimer
Due to continued product development this information may change without notice. Navman does not
warrant that this document is error-free.
The screenshots and other presentations shown in this manual may differ from the actual screens
and presentations generated by the actual product. All such differences are minor and the actual
product will deliver the described functionality as presented in this User Manual in all
material respects.
Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The software is based in part on the work of the Independent JPEG Group.
iCN 700 Series - Map Installation Guide
4
Important safety information
PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT
IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s
safety or make it illegal to operate in some jurisdictions.
Follow all product instructions and all instructions in your vehicle owner’s manual regarding
accessories or modifications.
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories
or modifications.
It is your sole responsibility to place, secure and use the iCN in a manner that will not cause
accidents, personal injury or property damage. Always observe safe driving practices.
iCN 700 Series - Map Installation Guide
5
Mount the iCN in a position that is secure and does not obstruct the driver’s view.
Do not mount the iCN in a way that may interfere with the safe operation of the vehicle, the
deployment of air bags or other safety equipment.
Do not operate the iCN while driving.
Before you use your iCN for the first time, familiarize yourself with your device and its operation.
On main roads, the distance to an exit calculated by the iCN may be further than the distance shown
on road signs. Road signs show the distance to the start of an exit while your iCN shows the distance
to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow
distance information on road signs.
The use of information regarding safety or speed camera locations may be subject to local laws in the
country of use. You are responsible for checking that you can legally use the information in your
country or in the country where the information will be used.
Do not handle the iCN while it is hot. Let the product cool, out of direct sunlight.
Do not expose the iCN to direct sunlight in an unattended vehicle for prolonged periods. Overheating
may damage the unit.
To discourage theft, do not leave the iCN, mounting bracket or any cables in plain view in an
unattended vehicle.
Failure to adhere to these warnings and cautions may lead to death, serious injury or property
damage. Navman disclaims all liability for installation or use of the iCN that causes or
contributes to death, injury or property damage or that violates any law.
iCN 700 Series - Map Installation Guide
6
Welcome
Thank you for purchasing new Navman maps. This Map Installation Guide has been
designed to help you install these maps to your iCN.
To install the maps, first install Smart5™ Desktop software on your computer, then
use it to install the required maps from the map CDs to your iCN internal memory or
memory card.
If you already have Smart5 Desktop installed on your computer, you need to reinstall the
software from the enclosed Application Installer CD as it may contain an updated version.
Box Contents
Item
Item
CDs containing:
Smart5 2006
software, including
Smart5 Desktop
Smart5 2006 SE
map data
Acrobat
®
Reader
®
5.1
The number of discs
included depends on
the country of
purchase.
Documentation including:
Map Installation
Guide
Global Support
Information
Software Product
Licence
iCN 700 Series - Map Installation Guide
7
What is Smart5 Desktop?
Smart5 Desktop is software for your computer and is used to install maps to
your iCN.
You can also use it to:
remove maps from your iCN
obtain software updates
manage Custom Points of Interest.
iCN 700 Series - Map Installation Guide
8
Can I use Smart5 Desktop with my computer?
Ensure your computer has the following minimum system requirements before
installing Smart5 Desktop:
IBM compatible PC
Microsoft
®
Windows
®
2000 SP4 or XP SP2 (NT not supported)
Internet Explorer 6 or higher
CD drive
USB port
Internet connection for registration.
You must install Smart5 Desktop from the Application Installer CD onto your
computer hard drive; you cannot run Smart5 Desktop from the CD.
What is Microsoft ActiveSync
®
?
Microsoft ActiveSync is used to establish a connection between your iCN and your
computer. ActiveSync 3.8 will be installed on your computer (if a later version of
ActiveSync is not already installed) as part of the installation of Smart5 Desktop.
After it is installed, ActiveSync will run in the Windows System Tray/Notification Area
when you start Windows. ActiveSync will activate when your iCN is connected to
your computer.
For more information on ActiveSync, search for "ActiveSync" at www.microsoft.com.
iCN 700 Series - Map Installation Guide
9
How do I install Smart5 Desktop onto my computer?
Before you begin:
Ensure that your computer meets the minimum system requirements for Smart5 Desktop,
especially:
i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install
Smart5 Desktop, even if it is not your default browser.
ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied
before you install Smart5 Desktop.
1. Close all open programs on your computer.
2. Insert the Smart5 Application Installer CD into your computer CD drive.
The Smart5 Desktop installer will start.
If your computer does not automatically launch the CD, start the installation
manually:
Start > Run.
Type D:\Install.exe where “D” is the letter assigned to your CD drive, then
click OK.
iCN 700 Series - Map Installation Guide
10
3. Select your preferred language for Smart5 Desktop.
4. Click Install SmartST Desktop.
5. Follow the screen prompts to install Smart5 Desktop:
Review and accept the Licence Agreement for Smart5 Desktop and
Microsoft ActiveSync (if not already installed on your computer) when
prompted.
Select a destination folder for Smart5 Desktop when prompted.
When the installation has finished, click Finish.
Smart5 Desktop will open.
6. If prompted to connect your iCN to your computer, complete the following:
Plug the large end of the USB cable directly into a USB port on your
computer (not a USB hub) and plug the small end into the USB Socket (
)
on the side of your iCN.
Where possible, plug the USB cable into a USB port at the back of your computer.
Plug the small end of the AC Power Pack cable into the socket on the
side of your iCN; plug the other end into the mains.
Press
O.
Your iCN will turn on.
iCN 700 Series - Map Installation Guide
11
When the following screen displays on your iCN, click Next:
Microsoft ActiveSync will synchronize with your iCN.
7. If prompted to update your iCN software, follow the on-screen prompts.
You are now ready to use Smart5 Desktop to install maps to your iCN.
iCN 700 Series - Map Installation Guide
12
How do I keep Smart5 up-to-date?
We recommend that you regularly use Smart5 Desktop to check the Navman server
for Smart5 software updates.
Updating vs. Upgrading
Updating software is different from upgrading software:
When you update Smart5, the latest service packs and bug fixes are downloaded from the
Navman server and applied to your iCN.
To upgrade Smart5, you must first purchase a new version of Smart5 from a retailer, then
install it on your iCN.
1. If you connect to the Internet via a dial-up connection, connect to the Internet
now.
2. Open Smart5 Desktop, follow the prompts, and then click Check for updates.
Your computer will connect to the Navman server to check for software updates.
3. If a software update is available, complete the following:
a) Click Update available.
The Navman website will open.
b) Select the update for your region and download it to your computer.
c) On the Setup menu, point to Update software, and then click Update
software on iCN.
Follow the prompts to update your iCN software.
iCN 700 Series - Map Installation Guide
13
How do I remove old maps from my iCN?
You cannot use a 2006 map and a 2006 SE map of the same area at the same time.
Complete the following steps for each map you are upgrading:
1. Open Smart5 Desktop, if it is not already open:
Start > All Programs > Navman > SmartST Desktop 2006
2. Click the View/Remove Maps tab.
The View/Remove tab will open, displaying a list of installed maps.
3. Select the name of the map you want to remove from the list, then click Remove.
4. Confirm that you want to remove the selected map when prompted.
The map is removed from your iCN.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Navman Map Installation Guide iCN 700 Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Navman Map Installation Guide iCN 700 Series in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens, Zweeds als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info