512556
6
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
6
Diesel fuel flow sensor kit Installation and Operation Manual
NAVMAN
The Navman diesel fuel flow sensor kit
measures the fuel consumption and RPM of
your diesel engined boat. But that is a gross
understatement of the capabilities of this
powerful diagnostic tool. This manual is written
to help you understand the many functions the
system can perform, and to help you interpret
the numbers it can provide. We also give some
basic information on some of the factors which
can influence boat performance, and what the
various readings from the sensors can reveal
about your boat. Hopefully, by understanding
more, you will no longer think of the engine as
just a noisy and expensive mystery.
In the end we should be able to help you make
your boating experience more relaxing, safer,
more economical and better informed.
1 Introduction
1-1 Diesel fuel flow sensor features
A positive displacement flowmeter, with
one moving internal part - there are no
fine pointed shafts and jewelled bearings
to get worn or hammered by diesel
pulsing.
Diecast aluminium housing.
A direct flow bypass valve, to take the
sensor out of the fuel line if required.
Low pressure drop across the sensor.
Simple, in-line installation, much like a
primary fuel filter.
The inlet and outlet ports have a
commonly-available thread: a ¼ NPT
parallel female thread on sensor is used
with a ¼ NPT taper male thread on the
fitting.
No restrictions on pipe geometry on entry
or exit from sensor.
Supplied with temporary straight through
pipes to make installation safer.
Factory tested and calibrated - sensors
This manual describes:
How to install a diesel fuel flow sensor kit
onto a diesel engine (sections 6 and 7).
How to understand and interpret the fuel
sensor readings (sections 2 and 3).
How to use the fuel flow readings to
understand and optimise your propeller
and engine performance (sections 4 and
5).
Note that this fuel flow sensor kit does not
have a display. The kit must be installed with a
Navman marine instrument to display the fuel
readings, such as the DIESEL 3200. A second
sensor kit can be fitted for twin engine boats.
It is vital to read this document and the Navman
display instrument’s installation and operation
manual before installing or using this kit.
do not normally require calibrating again.
Each engine is fitted with two fuel flow sensors.
One sensor, in the the fuel supply line measures
flow from tank to engine. The other sensor, in
the fuel return line measures flow from the
engine back to the tank.
The flow sensor system calculates the engine
consumption from the supply and return flow
rates. It compensates for:
Reverse flow pulsing from diaphragm lift
pumps.
Different fuel temperatures in the supply
and return lines - as fuel heats up it
expands and its viscosity changes
The flow characteristics of the sensors.
The system also has a tachometer to measure
the engine RPM with digital accuracy.
The system reports the fuel flow, total fuel
consumed and engine RPM over a serial digital
information link to the Navman instrument to
display the fuel data.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Navman Diesel Fuel Flow Sensors bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Navman Diesel Fuel Flow Sensors in de taal/talen: Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Navman Diesel Fuel Flow Sensors

Navman Diesel Fuel Flow Sensors Gebruiksaanwijzing - Nederlands - 32 pagina's

Navman Diesel Fuel Flow Sensors Gebruiksaanwijzing - Deutsch - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info