512550
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
6
DEPTH 2100 Installation and Operation Manual
NAVMAN
2. When the unit is on, release . The display
will indicate the current display unit with:
8Ft
888
Feet Metres
8FA
Fathoms
3. Use
and to change the value.
4. To exit this mode, press and hold both
and
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal depth
display will resume.
OFFON
^
V
Press simultaneously
The display will now indicate the current water
depth in the selected display unit.
Multiple Depth 2100 instruments can be installed on
a single vessel. These instruments can be connected
together and configured to operate in a dual station
configuration. One instrument is designated as a
master and all other instruments, connected to it,
are configured as slaves. The master device is
connected to the depth transducer and determines
the water depth. This information is then displayed
on all slave devices connected to it. Slave devices
do not have transducers connected to them.
The slave devices can be configured to operate as
fully functional NMEA repeaters where they display
water depth, as displayed on the master device, and
share common alarm settings and keel offset values.
In this mode the common alarm settings can be
changed or activated/deactivated from either the
master or slave devices.
Alternatively, the slaves can be configured to operate
as independent slaves. In this mode the slaves display
the water depth received from the master, but have
independent alarm settings and keel offset values.
Note: The instrument designated as the
master device is the only instrument connected to
the depth transducer.
3 Dual Station Operation
Master/Slave Selection
To select the master/slave mode of operation:
1. Apply power while holding down
.
OFF
V
Hold down during power up
2. When the unit is on. The display will indicate
the current display unit:
8Ft
example
3. Continue to hold
until the display indicates
the current master/slave selection.
Master Slave
4. Use
and to change the selection.
5. To exit this mode, press and hold both
and
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal
depth display will resume.
OFFON
^
V
Press simultaneously
Note: If the data link is inadvertently brocken then
the display will alternate between -- and -SL.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Navman Depth 2100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Navman Depth 2100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Navman Depth 2100

Navman Depth 2100 Gebruiksaanwijzing - Nederlands - 10 pagina's

Navman Depth 2100 Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info