663846
21
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
NAVMAN 8120/8084 Installation and Operation Manual 21
3 Navigation: Chart
3-1 Introduction to navigating
The chart window shows the chart, the boats position course and navigation data.
The Instrument has two ways of navigating, going straight to a point or following a route.
3-1-1 Navigating to a point
When the Instrument is navigating to a
point, the chart and highway windows show
navigation data:
A The boat position
.
B The destination point marked with a circle.
C The boats plotted course to the
destination.
D Two CDI lines, parallel to the boats plotted
course, which indicate the maximum
expected deviation from the plotted
course.
For more information, see Appendix C.
If the Instrument is connected to an autopilot,
the Instrument will send data to the autopilot
to steer the boat to the destination. Start the
autopilot before starting to navigate to the
point.
If the Instrument has no autopilot, steer the
boat manually:
a use the boat position and destination on
the chart or highway windows
b or use navigation data displayed on the
data header (see section 2-7-3)
c or use COG and BRG on the compass (see
section 2-7-4).
Note:
1 If the XTE alarm is enabled, an alarm will
sound if the boat deviates too much from
its intended course (see section 19-10).
2 If the arrival radius alarm is enabled, then
an alarm will sound to show that the boat
has reached the destination
(see section 19-10).
3 When the destination is reached an
arrival warning appears with the option
to cancel navigation (goto or route). Yes
the navigation is cancelled, no navigation
continues however XTE and highway are
no longer displayed.
3-1-2 Going to a waypoint or to a point on the
chart
A waypoint is a position that you can set on
the Instrument chart, for example a fishing
spot or a point on a route (see section 6).
Going to a waypoint from the chart
window
1 Go to the chart window.
2 Move the cursor to the waypoint: either
use the cursor keys or use Find (see
section 3-2-5).
3 Press
MENU
and select Goto waypoint.
Going to a waypoint from the waypoints
window
1 Go to the waypoints window.
2 Press
or to highlight the waypoint to
go to.
3 Press
MENU
and select Goto.
A
D
B
C
D
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Navman 8084 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Navman 8084 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info