798720
3
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
RB425
R365, R425 & R525
RSE425, RSE525 & RSE625
RXT365, RXT425, RXT525 & RXT625
ROGUE® SERIES
Owner's Manual
Grills illustrated in this manual may differ
from model purchased.
Apply Serial Number
We Want Your Feedback!
Visit Napoleon.com to write a review
2 | Welcome Napoleon.com | Rogue® Series Grills
Welcome
!
!
DANGER!
IF YOU SMELL GAS:
Shut off gas to the appliance
Extinguish any open flame
Open lid
If odor continues, keep away from the appliance
and immediately call your gas supplier, or fire
department.
WARNING!
Do not try to light this appliance without reading the
“LIGHTING instructions section of this manual.
Do not store or use gasoline, or other flammable liquids
or vapors in the vicinity of this or any other appliance.
An L.P. (propane) cylinder not connected for use
must not be stored in the vicinity of this or any other
appliance.
If the information in these instructions is not followed
exactly, a fire or explosion may result and cause property
damage, personal injury, or death.
Alert adults and children about the hazard of hot surface temperatures. Supervise young children near the grill.
NOTICE TO INSTALLER: Leave these instructions with the grill owner for future reference.
NOTICE TO CONSUMER: Keep these instructions for future reference.
WE WANT YOUR GRILLING EXPERIENCE TO BE MEMORABLE AND SAFE.
Please read and follow this Owner’s Manual before using your grill to avoid property damage, personal injury, or death.
Remove all packaging material, promotional labels and cards from the grill before use.
USE OUTDOORS IN A WELL-VENTILATED SPACE
CONGRATULATIONS
ON YOUR NAPOLEON GRILL!
You’ve Just Upgraded Your Grilling Game.
Napoleon.com | Rogue® Series Grills Welcome | 3
EMAIL
eu.info@napoleon.com
ONLINE
www.napoleon.com
PHONE:
+31 345 588655
Welcome
Welcome to Napoleon!
CONTENTS
Welcome to Napoleon! 3
Safety First
Full System Features 4
Getting Started 5
Leak Test
Operation 9
Lighting your grill
Grilling Instructions
How to use the Rear Burner & Rotisserie
The Grilling Experience Checklist
How to season cast iron cooking grids
Infrared Grilling Guide 13
Cleaning Instructions 14
Maintenance Instructions 17
Combustion in air adjustment
Stainless in harsh environments
Troubleshooting 19
Warranty 22
Safety firSt
WARNING! General Information.
This grill should be installed in conformity with local codes.
If a rotisserie motor is used, it must be electrically grounded in
accordance with local codes.
WARNING! Installation & Assembly
Assemble this grill exactly as instructed in the Assembly
Guide. If the grill was assembled in-store, review the assembly
instructions to ensure it is done correctly.
Not to be installed in or on recreational vehicles and/or boats.
Perform the required Leak Test before operating the grill.
Do not modify this grill under any circumstances.
Do not use a cylinder that is not equipped with the appropriate type
connection.
Only use the pressure regulator and hose assembly supplied with this
grill or replacement parts specifically recommended by Napoleon.
WARNING! Operation
Read this entire Owner’s Manual before operating this grill.
Leak Test this grill before each use, annually and when any gas
components are replaced.
Follow the lighting instructions carefully.
WARNING! Storage & Disuse
Turn off gas at the propane cylinder or natural gas supply valve.
Disconnect the hose between the propane cylinder and grill.
Remove the propane cylinder and store outdoors in a well-ventilated
space away from children.
DO NOT store propane cylinders in a building, garage, shed, or any
other enclosed space.
Disconnect the natural gas hook-up from the supply when storing the
grill indoors.
WARNING! Correct Product Disposal
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
!
!
!
!
4 | Features Napoleon.com | Rogue® Series Grills
Condiment Basket
to keep your
favourite sauces
and spices close on
hand
Rear Infrared Rotisserie
Burner to enjoy succulent
rotisserie meals
Easy access drip
pan for efficient
maintenance
Backlit Control
Knobs for
late night
entertaining
Stainless Steel Iconic
WAVE Cooking Grids
for those distinctive
sear marks and even
cooking
Dual-level Stainless
Steel Sear Plates for
consistent even heating
and vaporizing drippings
for more flavourful food
Heavy Gauge
Stainless Steel
Burners for long
lasting quality
Instant JETFIRE
Ignition for quick
and east start-up
Stainless Steel
Folding Side
Shelves with
Integrated Tool
Hooks
ACCU-PROBE Temperature Gauge
to easily read the temperature for
perfect results
Integrated Bottle
Opener close to the
grilling action
Propane Tank Ring
for stable tank
storage (propane
models only)
Easy Locking
Casters safely lock
the grill in position
Large chrome plated
Warming Rack for
increased cooking area
Infrared SIZZLE
ZONE Side
Burner for
perfectly grilled
steaks
The grills illustrated in this Owner’s Manual may differ from the model you purchased. Featured model: ROGUE RSE625
!
Features
Full System Features
Napoleon.com | Rogue® Series Grills Getting Started | 5
Always maintain proper clearance to combustibles 26”
(660.4mm) to rear of unit, 10” (254mm) to sides.
Additional clearance of 24” (610mm) is recommended
near vinyl siding or panes of glass.
Getting Started
DANGER / WARNING! Advises of a hazard that
could result in a fire, explosion, death or serious
physical injury.
WARNING / CAUTION! Advises of a hazard that
could result in minor physical injury or property
damage.
Wear protective gloves.
Wear safety glasses.
CAUTION! Hot surface.
!
!
additional Safe operating practiceS
Do not route the hose underneath the drip pan. Maintain
proper hose clearance to the bottom of the unit.
Ensure sear plates are positioned properly according to
sear plate installation instructions.
Burner controls must be off when turning the gas cylinder
valve on.
Do not light burners with the lid closed.
Do not operate the rear burner(s) with the main burners.
Do not close the side burner lid when operating or hot.
Do not deep fry food on the side burner.
Do not adjust the cooking grids when operating or hot.
Do not move the appliance during use.
Turn off the gas supply at the gas cylinder after use.
Do not modify the appliance.
Maintenance should only be done when the grill is cool.
Do not store lighters, matches or any other combustibles in
the condiment tray.
Keep all electrical supply cords and fuel supply hoses away
from all heated surfaces.
Clean the grease tray, drip pan, and sear plates regularly to
avoid build-up and grease fires.
Keep the infrared burner and main burner venturi
tubes free from spider webs and other obstructions by
inspecting and cleaning it regularly.
Do not allow cold water (rain, sprinkler, hose etc.) to
contact the heated grill. An immediate temperature
change will chip the porcelain and crack the ceramic
burners.
Do not use a pressure washer to clean any part of the
grill.
Do not locate this grill where it can be exposed to high
winds, especially when the wind can come from directly
behind the grill.
Do not operate appliance under any combustible
construction.
Never cover more than 75% of the cooking surface with
solid metal.
This appliance must be kept away from flammable
materials while in use.
Important information.
Do not smoke while performing a gas leak test.
Sparks or flames will cause a fire, explosion,
damage to property, serious physical injury, or
death.
Never use an open flame to check for gas leaks.
Sparks or flames will cause a fire, explosion,
damage to property, serious physical injury, or
death.
DANGER! Immediately shut off the gas supply
and disconnect.
!
STOP
Getting Started
CAUTION! The hook-up and installation of the gas and hose connection must be performed by a licensed gas fitter, and
leak tested before operating the grill.
CAUTION! Ensure the hoses do not contact any high temperature surfaces of the grill.
WARNING! Accessible parts may be very hot. Keep young children away.
!
6 | Getting Started Napoleon.com | Rogue® Series Grills
1
3
2
Getting Started
WARNING! Do not store a spare gas cylinder below the grill head or side burners.
WARNING! Never use a gas cylinder that is beyond 80% full.
WARNING! Follow all specifications and instructions exactly to prevent fire, explosion, property damage, personal
injury, or death.
WARNING! Disconnect the grill and its individual shutoff valve from the gas supply piping system during any
pressure testing in excess of ½ psi (3.5 kPa).
WARNING! Close the individual shutoff valve to isolate the grill from the gas supply piping system during any
pressure testing equal to or less than ½ Psi (3.5 kPa).
gaS connectionS
Option 1: To a Gas Cylinder
Use a propane cylinder of minimum 6 kg or a butane cylinder of 13 kg
constructed and marked in accordance with national and regional codes. Ensure
that the cylinder can provide enough fuel to operate the appliance. If in doubt,
check with your local gas supplier.
Use a gas pressure regulator and hose supplied by Napoleon; if not included, use
a regulator and hose that meet national and regional codes. The recommended
length of the hose is 0.9m. The hose must never be longer than 1.5m.
Note: The hose should be replaced before the expiry date printed on it.
Only place cylinders within the maximum width and height dimensions inside the
enclosure on the bottom shelf. Cylinders that surpass the maximum dimensions
must be placed outside the enclosure on level ground. Refer to the diagram below
for specific measurements.
Hook-up and Installation
Check the cylinder for dents or rust, and have it inspected by your gas
supplier.
Never use a cylinder with a damaged valve.
Place the cylinder in its designated area on the bottom shelf.
Ensure the gas regulator hose has no twists or kinks.
Remove the cap or plug from the cylinder fuel valve.
Tighten the regulator to the cylinder valve.
Ensure the hose does not contact with the drip pan or any high temperature
surfaces of the grill because it will melt and cause a fire.
Ensure the cylinder is not left exposed to extreme heat or direct sunlight.
Leak test all joints prior to operating the grill. See Leak Test.
310 mm
590 mm
Maximum Cylinder Dimensions
Napoleon.com | Rogue® Series Grills Getting Started | 7
Getting Started
WARNING! Check the hose for evidence of excessive abrasion, melting, cuts or cracks. If the hose is damaged,
it must be replaced with an assembly specifically recommended by Napoleon.
!
GRILLING
PRO TIP!
Get inspired to create
delicious meals from the
recipes and grilling
techniques at
www.napoleon.com and
Napoleon’s cookbooks.
Technical Data
The following table lists gross heat input, gas usage values and orifice sizes corresponding to each burner per Gas Category:
ORIFICE SIZE GROSS HEAT INPUT
(TOTAL) GAS USAGE (TOTAL)
I II I / II I / II
MAIN (365) 1.11mm #62 10.5 kW 764 g/hr
MAIN (425) #59 #64 14.25 kW 1037 g/hr
MAIN (525) #61 #65 16.6 kW 1208 g/hr
MAIN (625) #61 #65 20.75 kW 1514 g/hr
REAR #57 #62 5 kW 364 g/hr
SIDE (2 TILE INFRARED) 0.86mm #69 3 kW 218 g/hr
SIDE (3 TILE INFRARED) #59 #64 4.5 kW 327 g/hr
SIDE FLAME 0.86mm #69 3 kW 218 g/hr
The following table lists all certified gases and pressures. Verify the information on the rating plate corresponds with this list.
Note: Only use regulators that supply the pressure listed here.
Gas Category I3B/P(30) I3+(28-30/37) I3P(37) I3B/P(50)
Orifice Sizes I I I II
Gases / Pressures Butane 30mbar
Propane 30mbar
Butane 28-30mbar
Propane 37mbar Propane 37mbar Butane 50mbar
Propane 50mbar
Countries
AL, BE, BG, CY, CZ,
DK, EE, FI, FR, GB,
GR, HR, HU, IS, IT,
LT, LU, MT, NL, NO,
PL, RO, SE, SI, SK,
TR
BE, CH, CY, CZ, ES, FR,
GB, GR, IE, IT, LT, LU,
LV, PL, PT, SI, SK, TR
BE, CH, CZ, ES, FR,
GB, GR, HR, HU, IE, IT,
LT, NL, PL, PT, RO, SI,
SK, TR
AT, CH, CZ, DE, SK
8 | Getting Started Napoleon.com | Rogue® Series Grills
Getting Started
WARNING! Never use an open flame to check for gas leaks. Sparks or flames will cause a fire, explosion, damage
to property, serious physical injury, or death.
WARNING! Only use the pressure regulator and hose assembly supplied with the
grill, or one in conformity with local codes.
!
leak teSt
Why and When to Leak Test?
A leak test confirms no gas is escaping after you
connect the hose to the gas supply.
Each time the tank is refilled and reinstalled,
ensure that there are no leaks in the fitting where
the regulator connects to the tank.
Leak test this grill before use, annually, and when
any gas components are replaced.
Leak Test Steps
1. Do not smoke while performing the test.
2. Remove all sources of ignition.
3. Turn all burner controls to the off position.
4. Turn the gas supply valve on.
5. Brush a half-and-half solution liquid soap and
water onto all joints and connections of the
regulator, hose, manifolds, and valves.
6. Bubbles indicate a gas leak.
If you find a leak
1. Tighten any loose joints.
2. If the leak cannot be stopped, immediately shut off the gas
supply and disconnect the grill.
3. Have the grill inspected by a certified installer, or dealer.
4. Do not use the grill until the leak has been fixed.
STOP
Napoleon.com | Rogue® Series Grills Operation | 9
Side Burner
Igniter
Right Centre
Main Burner
Left Centre
Main Burner
Left
Main Burner
Right
Main Burner
Centre
Main Burner
Rear Burner
Lights
Operation
WARNING! Ensure all burner controls are in the OFF position before slowly turning on gas supply valve.
WARNING! Follow the lighting instructions carefully.
WARNING! Make sure the lid of the grill is OPEN while igniting.
WARNING! Do not adjust the cooking grids while the grill is hot, or operating.
WARNING! Never grill food directly on the flame side burner. It is designed for use with pots and pans only.
!
1
2
3
4
3
1
2
23
Fig. 1
Fig. 2
Fig. 3
WARNING! Do not use the rear burner while operating the main burner.
lighting your grill
Is it the very first time? Perform a Burn-off
Remove warming rack and run the main burners on high for
30 minutes. It is normal for the grill to emit an odor the first
time it is lit. This odor is caused by the “burn-off” of internal
paints and lubricants used in the manufacturing process and
will not occur again.
Main Burner Lighting
1. Open grill lid.
2. Push and slowly turn any main burner knob counter clockwise
to HIGH position until pilot lights. Continue to push down on
the control knob until the burner lights and then release.
3. If the pilot does not light – immediately turn the control knob
clockwise to the OFF position. Repeat step 2.
4. If the pilot and burner will not light in 5 seconds – turn the
control knob clockwise to the OFF position. Wait 5 minutes
for gas to dissipate. Repeat steps 2 and 3, or light with a
match. (Fig. 1) .
Rear Burner Lighting (if equipped)
1. Open grill lid.
2. Remove warming rack.
3. Push and slowly turn rear burner knob counter clockwise to HIGH
position.
4. Press and hold igniter button until the burner lights, or light by match.
5. If the burner will not light – turn burner control knob clockwise to the
OFF position. Wait 5 minutes. Repeat step 3 and 4. (Fig. 1)
Side Burner Lighting (if equipped)
1. Open burner cover.
2. Push and slowly turn side burner knob counter clockwise to HIGH
position.
3. Press and hold igniter button until the burner lights, or light by match.
4. If the burner will not ignite – turn burner control knob clockwise to the
OFF position. Wait 5 minutes. Repeat step 2 and 3. (Fig. 2)
Lighting with a match
1. Clip the match into the supplied lighting rod.
2. Insert the lit match through the cooking grids and sear plates
3. While turning the corresponding burner knob to high. (Fig. 3)
WARNING! Do not operate the rear or side burner while
performing a Burn-Off.
!
Operation
10 | Operation Napoleon.com | Rogue® Series Grills
grilling inStructionS
Main Burner Use
Preheat the grill before searing food by operating all main burners on high with the lid closed for approximately 10 minutes.
Food cooked for only a short time such as fish and vegetables can be grilled with the lid open.
Grilling with the lid closed ensures higher and consistent temperatures that cook meat more evenly and can reduce cooking times.
The cooking grids can be oiled before preheating to reduce sticking when grilling lean meat such as chicken breast, or pork.
Food that takes longer than 30 minutes such as roasts can be cooked indirectly with the burner lit opposite the food. See Indirect
Grilling.
Trim excess fat off meat to prevent flare-ups, or reduce the temperature of the grill.
Flare ups – move food away from the flames and reduce the heat. Leave the lid open.
Direct Grilling
This method is often used for searing, or food cooked for only a short time such as
hamburgers, steaks, chicken, or vegetables.
Place food on the cooking grids directly over the heat.
Sear meat first to trap-in the juices and flavor.
Lower the grill temperature to finish cooking to your preference.
Indirect Grilling
This method uses lower temperatures and circulates heat around the food cooking
it slowly and evenly. Use this method to cook larger cuts of meat, or food prone to
flare-ups such as roast, chicken, or turkey.
Turn one or more burners on and place food on the cooking grid where there is no
flame, or burner on.
Grilling at a lower temperature and slower cooking time results in more tender
meats.
Flame Side Burner (if equipped)
The flame side burner can be used like a stove top to make gravy or soups.
The maximum pot or pan diameter is 10” (24 cm).
Be sure your grill is in a location protected from the wind, or the performance of
the side burner will be affected.
Infrared Side Burner (if equipped)
To operate, follow the “Side Burner Lighting instructions. The infrared heat
provides an even cooking area for searing food when it’s set to high.
Some side burner models have a height-adjustable cooking grid.
Grilling at Night (if applicable)
Illuminate the control knobs by pushing the light bulb icon on the control panel.
Operation
WARNING! Do not close side burner lid while it is operating or hot.
WARNING! Do not deep fry food on the side burner. Cooking with oil can be dangerous.
WARNING! Regularly clean grease out of the entire unit, including the grease tray and the sear plates, to avoid build-up and
grease fires.
WARNING! Do not leave food unattended on any lit burners.
!
GRILLING
PRO TIP!
Use a thermometer
to check the internal
temperature of meat
to ensure it is cooked
perfectly.
GRILLING
PRO TIP!
Add a Napoleon smoker
accessory to your grill
to flavor your meat.
Napoleon.com | Rogue® Series Grills Operation | 11
Operation
WARNING! Disassemble rotisserie components when finished cooking, wash with warm soapy water, and store
indoors.
WARNING! Use heat resistant grilling gloves when handling the hot rotisserie components.
WARNING! Disconnect rotisserie plug from the outlet when the grill is not in use.
DID YOU
KNOW?
You can remove the
cooking grids if they
interfere with cooking
larger cuts of meat.
how to uSe the rear Burner & rotiSSerie
Assembling Your Rotisserie Kit (if equipped)
Note: Remove the warming rack prior to using the rear burner and
spit rod. Extreme heat will damage the warming rack.
1. Install the rotisserie motor on the side of the grill using the
mounting bracket(s). Some models have pre-mounted brackets.
2. Once the bracket has been fastened to the grill, slide the
rotisserie motor onto the bracket.
3. Slide the first rotisserie fork just past the middle of the spit rod
and tighten into place. Thread the meat onto the spit rod and
push the meat into the fork. Slide the second rotisserie fork on
the opposite end of the spit rod and push the fork into the meat
until secure. Tighten the fork into place.
4. Carefully insert the pointed end of the spit rod into
the rotisserie motor and set the opposite end across
the hangers. The heavy side of the meat will naturally
hang down to balance the load.
5. Slide the stop bushing onto the spit rod until it is past
the inside of the hood. This will secure the side to
side movement of the spit rod.
6. Tighten the stop bushing and spit rod handle. Place a
metal dish under the meat to collect the drippings.
IMPORTANT! Always wear gloves when
handling components of the grill.
!
Tips about using the Rotisserie:
Operate the rear burner on high until the meat
browns. Reduce heat. Keep lid closed.
Use a thermometer to check the internal
temperature of the meat.
Roasts and poultry should brown on the outside
and stay tender on the inside.
Use drippings to baste and make gravy.
A 3-pound chicken takes approximately 1 ½ hours
on medium to high.
Be mindful of your rotisserie motor capacity.
Never overload your equipment.
Be sure to always set an evenly balanced load on
your rotisserie.
How to cook multiple chickens
1. Tie or skewer wings to the body of the
chickens.
2. Slide rotisserie fork onto spit rod.
3. Thread first chicken onto spit rod until
it is held into place by the rotisserie
fork. Tighten.
4. Thread next 2 chickens onto spit rod
so all the chickens are close together.
5. Slide second rotisserie fork onto spit
rod and push into chicken until all 3
chickens are squeezed together tightly.
Tighten.
6
5
4
3
2
1
6
5
4
3
2
1
12 | Operation Napoleon.com | Rogue® Series Grills
Operation
the grilling experience checkliSt
Refer to this list every time you grill
Read Owner’s Manual
Be sure to have read the owner’s manual and all the safety instructions.
Clean grease tray
Always ensure you clean the grease tray prior to grilling to avoid fires and flare-ups.
Check the hose
Ensure the grill is off and cool. Check the hose for evidence of excessive abrasions,
or cuts. Have the hose replaced before use if the hose is damaged.
Preheat and clean grids
Coat the grids with vegetable shortening and preheat your grill to burn off
excess residue and prevent sticking. Clean cast iron grids with a brass
wire brush and stainless steel grids with a stainless brush. See "Cleaning
Instructions".
NOTE: Stainless steel cooking grids are corrosion resistant and require less
maintenance than cast iron grids.
Prep area
Make sure everything you need while grilling such as your utensils, seasonings,
sauces, and dishes are within your reach. Don’t leave your food unattended, or it
could burn.
Flip once and do not peek
Try not to open the lid and peek too much, or heat will escape and throw your
temperature and cooking times off. Flip your food only once, especially steak and
chicken.
Leave space
Leave some space on the grill and between food, so you have room to move food
around if you need to.
Use a thermometer
Use a thermometer to ensure food is cooked thoroughly. Follow the appropriate
temperatures guidelines for all types of meat, especially poultry.
how to SeaSon caSt iron cooking gridS
This procedure MUST be done prior to first use and repeated every 3-4 uses to keep grids looking new.
1. Remove cast iron grids from the grill.
2. Wash grids with warm soapy water and soft cloth.
Pat dry and allow grids to completely dry.
3. Apply fat/oil evenly using a silicone brush on both
sides.
4. Preheat appliance to 350°F-400°F(176°C-204°C).
5. Install cooking grids and cook for 30 minutes.
6. Apply a second even coat of fat/oil on cooking grids,
and keep cooking for 30 more minutes.
7. Grids are now seasoned.
NOTE: If rust has formed on the cast iron grids,
remove the rust with scouring pad or brass brush and
repeat the seasoning process.
GRILLING
PRO TIP!
Always preheat the grill
before cooking to burn
off leftover residue and
prevent food from sticking
to the grate.
OIL AND FAT
SUGGESTION!
Grapeseed Oil
Sunflower Oil
Soybean Oil
Extra Virgin Olive Oil
Canola Oil
If not available, select an oil
or fat that has a high smoke
point. Do not use salted fats
like butter or margarine.
BE
CAREFUL!
The lid of the grill and
the entire firebox can
become very hot when
in use.
Napoleon.com | Rogue® Series Grills Grilling Guide | 13
Grilling Guide
Infrared Grilling Guide
FOOD CONTROL KNOB SETTING COOKING TIME SUGGESTIONS
Steak
1 inch (2.54 cm) thick
HIGH – 2 minutes each side
Rare – 4 minutes
Ask for marbled fat in cut.
Fat is a natural tenderizer
and keeps meat juicy.
HIGH to MEDIUM – High
heat 2 minutes each side
then turn to medium heat
Medium – 6 minutes
Well done – 8 minutes
Hamburger
½ inch (1.27 cm) thick
HIGH – 2 minutes each side Rare – 4 minutes
Keep patties all the same
thickness for equal cooking
times. Patties 1 inch thick or
more should be grilled using
indirect heat.
HIGH – 2 ½ minutes each
side Medium – 5 minutes
HIGH – 3 minutes each side Well done – 6 minutes
Chicken
HIGH, MEDIUM, LOW – 2
minutes each side then
medium-low to low heat
20 – 25 minutes
Slice joint connecting the
thigh and leg ¾ through for
the meat to lie flat on the
burner and cook evenly.
Pork Chops
MEDIUM 6 minutes each side
Choose thick cuts for more
tender meat. Trim off excess
fat.
Spare Ribs
HIGH to LOW – High for
5 minutes then low until
finished
20 minutes each side
turning often
Choose lean meaty ribs. Grill
until meat pulls easily from
the bone.
Lamb Chops
HIGH to MEDIUM – High
for 5 minutes then Medium
until finished
15 minutes each side
Choose thick cuts for more
tender meat. Trim off excess
fat
Hot dogs
MEDIUM to LOW 4 – 6 minutes Select larger wieners and slit
lengthwise before grilling
14 | Cleaning Napoleon.com | Rogue® Series Grills
Cleaning
Cleaning Instructions
WARNING! Always wear protective gloves and safety glasses when cleaning your grill.
WARNING! Accumulated grease is a fire hazard.
WARNING! Cleaning should only be done when the grill is cool to avoid the possibility of
burns.
First Time Use
1. Wash grids by hand with water and mild dish soap to remove
any residue from the manufacturing process. DO NOT wash in a
dishwasher.
2. Rinse thoroughly with hot water and dry completely with a soft cloth
to prevent moisture from entering the cast iron.
Cast Iron Grids
Season your grids to add a protective coating to prevent corrosion
See Grilling Tips – How to Season your Cast Iron Cooking Grids.
Stainless Steel Grids
Stainless steel cooking grids can be cleaned by preheating the grill
and using a wire brush to remove residue.
Stainless steel grids will permanently discolor from regular use
because of high temperatures when grilling.
Infrared Side Burner
Most drippings and food particles that fall on the infrared burner
surface incinerates immediately because of the high intensity heat.
Do not clean the ceramic tile with a wire brush.
Do not use water or other liquids to clean the burner. An immediate
change in temperature will cause cracking of the ceramic tile.
Light burner and operate on high for 5-10 minutes to remove any
left-over residue.
Inside of the Grill
1. Remove the cooking grids.
2. Use a brass wire brush to clean loose debris from the sides and
underneath the lid.
3. Scrape the sear plates with a putty knife or scraper. Use a wire
brush to remove the ash.
4. Remove the sear plates and brush debris from the burners with a
wire brush.
5. Sweep debris from inside the grill into the drip pan.
Napoleon.com | Rogue® Series Grills Cleaning | 15
Cleaning
WARNING! Ensure all burners are turned off and grill is cool before cleaning. Do not use oven cleaner to clean any part
of the grill. Do not put cooking grids or any other parts of the grill in a self-cleaning oven to clean. Clean the grill in an
area where cleaning solution won’t harm decks, lawns, or patios.
WARNING! Barbecue sauce and salt can be corrosive and will cause rapid deterioration of the grill components
unless cleaned regularly.
Drip Pan
Every grill head, side burner and drop-in burner have a corresponding
drip pan. It is easily accessible through doors or openings.
Grease and excess drippings collect in the drip pan located
beneath the grill and accumulate in the disposable grease tray
below the drip pan
(if applicable).
Only use Napoleon approved liners on the drip pan. Never use
aluminum foil, sand or any other unapproved material. This can
prevent grease from flowing properly.
Clean frequently to avoid grease build-up – approximately every
4-5 uses.
Cleaning steps:
1. Slide the drip pan from the grill to access the disposable grease
tray or to clean the drip pan.
2. Scrape the drip pan out with a putty knife or scraper.
3. Replace the disposable grease tray every 2-4 weeks depending
on grill usage (if applicable).
4. See your Napoleon Grill dealer for supplies.
Control Panel
ONLY use warm soapy water.
Text is printed directly on the control panel and will gradually rub off
if abrasive or stainless steel cleaners are used.
Proper cleaning of the control panel will ensure the text remains dark
and legible.
Aluminum Castings
Clean with warm soapy water.
Aluminum doesn’t rust, but high temperatures and weathering can
cause oxidization on the surface of the castings that look like white
spots.
See “Maintenance Instructions” for more information on how to
prevent oxidized aluminum.
Outside Grill Surface
Only use a non-abrasive cleaner.
Abrasive cleaners or steel wool will scratch the finish.
Always wipe in the direction of the grain.
Handle porcelain enamel components with care.
The baked-on enamel finish is glass-like and will chip if struck.
Stainless steel parts discolor overtime when heated and will
turn a golden or brown hue. This is normal and won’t affect the
performance of the grill.
16 | Cleaning Napoleon.com | Rogue® Series Grills
Cleaning
Insect Screen and Burner Ports
Spiders and insects are attracted to small enclosed spaces.
Napoleon has equipped the burner with an insect screen on the air
shutter. This reduces the likelihood of insects building nests inside
the burner, but doesn’t eliminate the problem.
A nest or web can cause the burner flame to burn a soft yellow or
orange and cause a fire or flashback at the air shutter underneath the
control panel.
1. Remove the screw (s) that attaches the burner to the back wall of
the grill. Slide the burner back and upwards to remove.
2. Use a flexible venturi tube brush to clean the inside of the
burner.
3. Shake loose debris from the burner through the gas inlet.
4. Check the burner ports and valve orifices for blockages: burner
ports can close over time because of cooking debris and
corrosion.
5. Use an opened paper clip, or the supplied port maintenance bit
to clean burner ports.
6. Drill out blocked ports using the supplied drill bit in a small
cordless drill: this can be done with the burner attached to the
grill, but it’s easier if removed from the grill.
7. Do not flex the drill bit when drilling the ports because the drill
bit will break.
8. This drill bit is for burner ports NOT for brass orifices that
regulate the gas flow to the burner.
9. Do not enlarge the holes
10. Ensure the insect screen is clean, tight, and free of any lint
or other debris.
11. Reverse the procedure to reinstall the burner.
12. Ensure the valve enters the burner when installing.
13. Replace sear plate mount and tighten screws to complete
re-installation.
WARNING! It is very important the valve/orifice enters the burner tube when reinstalling the burner after cleaning
and before lighting your grill, or a fire or explosion could occur.
WARNING! Avoid unprotected contact with hot surfaces.
WARNING! Do not use abrasive cleaners or steel wool on any painted, porcelain, or stainless steel parts of your
grill because it will scratch the finish.
!
SAFETY
FIRST!
Always wear protective
gloves and safety
glasses when servicing
your grill.
Napoleon.com | Rogue® Series Grills Maintenance | 17
Burner Port
Yellow Tip
Dark Blue
Light Blue
Maintenance
Maintenance Instructions
WARNING! Keep the grill away from combustible materials, gasoline, and other flammable vapors and liquids.
!
RECOMMENDATIONS
This grill should be thoroughly inspected and serviced annually by a qualified service person.
Do not obstruct the flow of ventilation and combustion air.
Keep the cylinder enclosure ventilation openings located on the side of the cart or enclosure and front and back of the
bottom shelf clear from debris.
comBuStion in air adjuStment
!
IMPORTANT! This must be done by a qualified gas installer.
The air shutter is factory set and should not require adjusting
under normal conditions. Adjustments might be required under
extreme field conditions.
The flames of the air shutter will be dark blue, tipped with light
blue and occasionally yellow when adjusted correctly.
Too little air flow to the burner will produce soot and lazy yellow
flames.
Too much air flow to the burner will cause flames to lift erratically
and cause igniting difficulties.
WE WANT
TO HELP!
Contact the Napoleon
Customer Solutions
Department for
recommended
replacement parts.
+31 345 588655.
Note: Infrared burners have no air adjustment.
18 | Maintenance Napoleon.com | Rogue® Series Grills
Maintenance
WARNING! Turn off gas at the source and disconnect the unit before servicing.
WARNING! Maintenance should only be done when the grill is cool to avoid the possibility of burns.
WARNING! A leak test must be performed annually and when any component of the gas train is replaced, or
when the smell of gas is present.
SAFETY
FIRST!
Never cover more than
75% of any main or side
burner cooking surface
with any solid metal
(e.g. griddles or pans)
StainleSS in harSh environmentS
Stainless steel oxidizes or stains in the presence of chlorides and sulfides, especially in coastal regions, warm and highly humid
areas, and around pools and hot tubs. These stains look like rust, but they can be easily removed or prevented. Wash stainless
and chrome surfaces every 3-4 weeks. Clean with warm soapy water.
Burner Maintenance
Extreme heat and a corrosive environment can cause surface corrosion to occur even though the burner is made from
heavy wall 304 stainless steel.
Maintenance and Protection of Infrared Burners
Your infrared burners are designed to provide a long service life, but you must be careful to prevent cracking of their ceramic
surfaces. Fractures will cause the burners to malfunction.
IMPORTANT! Damage resulting from by failure to follow these
instructions is NOT covered by your grill warranty.
Steps to Avoid Damaging Ceramic Surfaces
1. Never douse a flame or control flare-ups with water.
2. Do not allow cold water (rain, sprinkler, hose etc.) to come in contact with hot ceramic burners. An immediate change in
temperature will cause cracking of the ceramic tile.
3. A ceramic burner that becomes wet before use will create steam when operated later and produce pressure that will crack
the ceramic.
4. Repeated soaking of the ceramic can cause it to swell and expand producing pressure that will make the ceramic crack and
crumble.
5. Inspect the ceramic for possible water soaking if you find standing water in the grill. Remove the burner if the ceramic is
wet. Turn it upside down to drain the excess water. Bring ceramic indoors to dry thoroughly.
6. Do not allow hard objects to impact the burner. Take care when inserting or removing cooking grids and using accessories.
Clearance Ventilation of hot air
Hot air must have a way to escape the grill for the burners to function properly.
The burners can become deprived of oxygen if the hot air is not allowed to escape causing them to back-flash. The ceramic
can crack if this occurs repeatedly.
!
Napoleon.com | Rogue® Series Grills Troubleshooting | 19
1
2
3
Troubleshooting
Troubleshooting
Lighting Problems
Main, rear or side burners will not light with the igniter, but will light with a match.
Burners will not cross light each other.
Possible causes Solution
Main
Burner
JETFIRETM outlet is dirty or clogged Clean JETFIRETM outlet with a soft bristle brush.
Dirty or corroded cross light brackets. Clean or replace as required.
Rear and Side
Burners
Dead battery, or installed incorrectly. Replace with premium heavy- duty battery.
Loose electrode wire or switch terminal wires.
Check electrode wire is firmly pushed onto the terminal on the
back of the igniter. Check the lead wires from the module to the
ignition switch (if equipped) are firmly pushed onto their respective
terminals.
Lifting flames on burner.
Close air shutter according to “Maintenance Instructions”-
Combustion Air Adjustment section in this Owner’s Manual.
IMPORTANT! This must be done by a qualified gas installer.
Noises and Flare-ups
Humming regulator.
Excessive flare-ups and uneven heat.
Possible causes Solution
Normal humming noise on hot days.
This isn’t a defect. It’s caused by internal vibrations in the
regulator and doesn’t affect the performance or safety of the grill.
Humming regulators WILL NOT be replaced.
The cylinder valve was opened too quickly. Open cylinder valve slowly
Sear plates installed incorrectly. Ensure sear plates are installed with holes towards the front, and
the slots on the bottom. See Assembly Instructions Guide.
Improper heating. Preheat grill with all main burners on high for 10 to 15 minutes.
Excessive grease and ash build on sear plates and in drip
pan.
Clean sear plates and drip pan regularly. Do not line pan with
aluminum foil. Refer to "Cleaning Instructions".
20 | Troubleshooting Napoleon.com | Rogue® Series Grills
Troubleshooting
Gas Flow
Low heat or low flame when valve is turned to high.
Burners burn with yellow flame, accompanied by the smell of gas.
Flames lift away from burner, accompanied by the smell of gas, and possible lighting difficulties.
Burner output on HIGH, but setting is LOW. Rumbling noise and fluttering blue flame at burner surface.
Possible causes Solution
Propane – improper lighting procedure
Ensure lighting procedure is followed carefully. All gas valves must
be in the OFF position when the tank valve is turned on. Turn tank
on slowly to allow pressure to equalize. See Operation – "Lighting
Instructions".
Natural gas – undersized supply line. Pipe must be sized according to installation code.
Leaking gasket surrounding the ceramic tile, or a weld
failure in the burner housing.
Allow burner to cool and inspect very closely for cracks. Contact
your authorized Napoleon dealer to order replacement burner
assembly if any cracks are found.
Both gas propane and natural gas – improper preheating. Preheat grill with both main burners on high for 10 to 15 minutes.
Possible spider web or other debris.
Thoroughly clean nest or webs out of your burner orifice by
removing it and following instructions in this manual.
See "Leak Test".
Improper air shutter adjustment.
Open or close air shutter slightly according to this manual.
See "Maintenance Instructions".
IMPORTANT! This must be done by a qualified gas installer.
Lack of gas Check gas level in propane cylinder.
Supply hose is pinched. Reposition supply hose as necessary.
Propane regulator in low flow state.
Turn the burners off and close the tank valve, wait 5 minutes
before fully re-opening the valve, allow a few seconds for the
pressure to equalize before following the Lighting Instructions to
start the grill. Ensure igniting procedure is followed carefully every
time you cook. All gas valves must be OFF when the tank valve is
turned on. Always open the tank valve slowly.
WE WANT
TO HELP!
Napoleon is here to ensure
your grilling experience
is memorable. Contact us
if you require additional
help.
Napoleon.com | Rogue® Series Grills Troubleshooting | 21
Troubleshooting
Infrared Burner Flashes Back
During operation the burner abruptly makes a loud whoosh sound, followed by a continuous blow-torch type sound and
grows dim or has a large flame on start up.
Possible causes Solution
Ceramic tiles overloaded with grease drippings and build-
up. Ports are clogged
Turner burner OFF and allow to cool for at least 2 minutes.
Reignite burner and burn on HIGH for at least 5 minutes, or until
the ceramic tiles are evenly glowing red.
Burner overheated because inadequate ventilation. Too
much grill surface covered by griddle or pan.
Ensure no more than 75% of the grill surface is covered by
objects or accessories. Turn burner OFF and allow to cool for at
least 2 minutes. Reignite.
Leaking gasket surrounding the ceramic tile, or a weld
failure in the burner housing.
Allow burner to cool and inspect very closely for cracks. Contact
your authorized Napoleon dealer to order replacement burner
assembly if any cracks are found.
Improper heating. Preheat grill with both main burners on high for 10 to 15 minutes.
Excessive grease and ash build on sear plates and in drip
pan.
Clean sear plates and drip pan regularly. Do not line pan with
aluminum foil. Refer to "Cleaning Instructions".
Peeling Paint
Paint appears to be peeling inside lid or hood.
Possible causes Solution
Grease build-up on inside surfaces.
This is not a defect. The finish on the lid and hood is porcelain
or stainless steel and will not peel. The peeling is caused by
hardened grease, which dries into paint-like shards, that flake off.
Regular cleaning will prevent this. See "Cleaning instructions".
22 | Warranty Napoleon.com | Rogue® Series Grills
Aluminum castings / stainless steel base
...........................................
15 years
Stainless steel lid
................................................................................
15 years
Porcelain enamel lid
...........................................................................
15 years
Stainless steel cooking grids
..............................................................
15 years
Stainless steel tube burners
...............................................................
10 years full coverage, plus 50% off until the 15th year
Stainless steel sear plates 5 years full coverage, plus 50% off until the 15th year
.....................................
5 years full coverage, plus 50% off until the 15th year
Ceramic infrared burners (excluding screen)
................................
5
years full coverage, plus 50% off until the 15th year
All other parts
www.napoleon.com
NNaappoolleeoonn PPrreessiiddeennttss 1155 YYeeaarr LLiimmiitteedd WWaarrrraannttyy
NAPOLEON products are designed with superior components and materials, and are assembled by trained
craftsmen who take great pride in their work. The burner and valve assembly are leak tested and test-fired at a
quality test station. This grill has been thoroughly inspected by a qualified technician before packaging and shipping
to ensure that you, the customer, receive the quality product you expect from NAPOLEON.
NAPOLEON warrants that components in your new NAPOLEON product will be free from defects in material and
workmanship from the date of purchase, for the following period:
...............................................................
2 years
................................................................................
Porcelain-enameled cast iron cooking grids
*Conditions and Limitations
This Limited Warranty creates a warranty period as specified in the
aforementioned table, for any product purchased through an authorized NAPOLEON
dealer, and entitles the original purchaser to the specified coverage in respect of
any component replaced within the warranty period, either by NAPOLEON or an
authorized NAPOLEON dealer, to replace a component of such product that has
failed in normal private use as a result of a manufacturing defect. The “50% off”
indicated in the table means the component is made available to the purchaser at
a 50% discount off the regular retail price of the component for the period
indicated. This Limited Warranty does not cover accessories or bonus items.
For greater certainty, “normal private use” of a product means that the product:
has been installed by a licensed, authorized service technician or contractor, in
accordance with the installation instructions included with the product and all
local and national building and fire codes; has been properly maintained; and has
not been used as a communal amenity or in a commercial application.
Similarly, “failure” does not include: over-firing, blow outs caused by
environmental conditions such as strong winds or inadequate ventilation,
scratches, dents, corrosion, deterioration of painted and plated finishes,
discoloration caused by heat, abrasive or chemical cleaners or UV exposure,
chipping of porcelain enameled parts, or damages caused by misuse, accident,
hail, grease fires, lack of maintenance, hostile environments such as salt or
chlorine, alterations, abuse, neglect or parts installed from other manufacturers.
Should deterioration of parts occur to the degree of non-performance (rusted
through or burnt through) within the duration of the warranted coverage, a
replacement part will be provided. The replacement component is the sole
responsibility of NAPOLEON defined by this Limited Warranty; in no event will
NAPOLEON be responsible for installation, labor or any other costs or expenses
related to the re-installation of a warranted part, for any incidental, consequential,
or indirect damages or for any transportation charges, labor costs or export duties.
This Limited Warranty is provided in addition to any rights afforded to you by local
laws. Accordingly, this Limited Warranty imposes no obligation upon NAPOLEON to
keep parts in stock. Based on the availability of parts, NAPOLEON may at its
discretion discharge all obligations by providing a customer a prorated credit
towards a new product. After the first year, with respect to this Limited Warranty
NAPOLEON may, at its discretion, fully discharge all obligations with respect to this
warranty by refunding to the original warranted purchaser the wholesale price of
any warranted but defective part(s).
The bill of sale or copy will be required together with a serial number and a
model number when making any warranty claims from NAPOLEON.
NAPOLEON reserves the right to have its representative inspect any product
or part prior to honoring any warranty claim. You must contact NAPOLEON
Customer Service or an authorized NAPOLEON dealer to obtain the benefit of
the warranty coverage.
Warranty
Warranty
Napoleon.com | Rogue® Series Grills | 23
Napoleon.com | ROGUE® SeriesLast Revision | A | July 19, 2021
NAPOLEON - CELEBRATING OVER 40 YEARS
OF HOME COMFORT PRODUCTS
De Riemsdijk 22, 4004 LC, Tiel, The Netherlands
10-12 Home Farm, Meriden Road, Berkswell, CV7 7SL, United Kingdom
24 Napoleon Road, Barrie, Ontario, L4M 0G8, Canada
PHONE: +31 345 588655
www.napoleon.com
eu.info@napoleon.com
N415-0608CE-GB
Napoleon products are protected
by one or more U.S. and Canadian
and/or foreign patents or patents
pending.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Napoleon RXT425 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Napoleon RXT425 in de taal/talen: Engels als bijlage per email.

De handleiding is 12.48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Napoleon RXT425

Napoleon RXT425 Gebruiksaanwijzing - Nederlands - 24 pagina's

Napoleon RXT425 Gebruiksaanwijzing - Deutsch - 24 pagina's

Napoleon RXT425 Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info