637920
23
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
N415-0255 / APR10.12
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
GARDER CE LIVRE POUR RÉFÉRENCES FUTURES.
MODULAR CABINET ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D’ASSEMBLAGE DES CABINETS
MODULAIRES
Use this manual in conjunction with your main manual to properly assemble your built-in grill. Refer to the
main manual for operating, cleaning, and maintenance instructions. This grill is designed for NON-COMBUSTIBLE
enclosures only, and must be installed and serviced by a qualified installer to local codes.
Afin d’assembler correctement votre gril encastré, veuillez vous référer à ce manuel ainsi qu’au manuel principal.
Consultez ce dernier pour les instructions d’opération, de nettoyage et d’entretien. Ce gril convient uniquement à des
cabinets INCOMBUSTIBLES et il doit être installé et entretenu par un installateur qualifié en respectant les codes locaux.
Napoleon Appliance Corp.,
214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8 Phone: 1-866-820-8686
Fax: (705)725-2564 email: wecare@napoleonproducts.com web site: www.napoleongrills.com
2
www.napoleongrills.com
CONDITIONS AND LIMITATIONS
NAPOLEON gas grills are manufactured under the strict Standard of the world recognized
ISO 9001-2008 Quality Assurance Certificate. NAPOLEON products are designed with superior components
and materials, and are assembled by trained craftsmen who take great pride in their work.
"NAPOLEON warrants its products against manufacturing defects to the original purchaser only, provided that the purchase was made through an authorized
NAPOLEON dealer and is subject to the following conditions and limitations:"
This factory warranty is non-transferable and may not be extended what-so-ever by any of our representatives.
The gas grill must be installed by a licenced, authorized service technician or contractor. Installation must be done in accordance with the installation instructions
included with the product and all local and national building and fire codes.
This limited warranty does not cover damages caused by misuse, lack of maintenance, grease fires, hostile environments, accident, alterations, abuse or neglect
and parts installed from other manufacturers will nullify this warranty.
This limited warranty further does not cover any scratches, dents, painted finishes, corrosion or discolouring by heat, abrasive and chemical cleaners, nor chipping
on porcelain enamel parts, nor any components used in the installation of the gas grill.
Should deterioration of parts occur to the degree of non-performance within the duration of the warranted coverage, a replacement part will be provided.
In the first year only, this warranty extends to the replacement of warranted parts which are defective in material or workmanship provided that the product has
been operated in accordance with the operation instructions and under normal conditions.
After the first year, with respect to this President's Limited Lifetime Warranty NAPOLEON may, at its discretion, fully discharge all obligations with respect to this
warranty by refunding to the original warranted purchaser the wholesale price of any warranted but defective part(s).
NAPOLEON will not be responsible for the installation, labour or any other costs or expenses related to the re-installation of a warranted part, and such
expenses are not covered by this warranty.
Notwithstanding any provision contained in this President's Limited Lifetime Warranty NAPOLEON's responsibility under this warranty is defined as above and it
shall not in any event extend to any incidental, consequential, or indirect damages.
This warranty defines the obligation and liability of NAPOLEON with respect to the NAPOLEON gas grill and any other warranties expressed or implied with
respect to this product, its components or accessories are excluded.
NAPOLEON neither assumes, nor authorizes any third party to assume, on its behalf, any other liabilities with respect to the sale of this product. NAPOLEON will
not be responsible for: over firing, blow outs caused by environmental conditions such as strong winds, or inadequate ventilation,
Any damages to the gas grill due to weather damage, hail, rough handling, damaging chemicals or cleaners will not be the responsibility of NAPOLEON.
The bill of sale or copy will be required together with a serial number and a model number when making any warranty claims from NAPOLEON.
NAPOLEON reserves the right to have its representative inspect any product or part prior to honouring any warranty claim.
NAPOLEON shall not be liable for any transportation charges, labour costs, or export duties.
NAPOLEON warrants the following materials and workmanship in your new NAPOLEON product
against defects for as long as you own it. This covers: stainless steel panels, stainless steel drawer
fronts. Subject to the following conditions. During the first ten years NAPOLEON will provide
replacement parts at our option free of charge. From the eleventh year to lifetime NAPOLEON will
provide replacement parts at 50% of the current retail price.
Components such as the leveling feet, pivot rods, hoses and connectors, fasteners and accessories are
covered and NAPOLEON will provide parts free of charge during the first year of the limited warranty.
NAPOLEON shall not be liable for any transportation charges, labour costs or export duties.
NAPOLEON PRESIDENT'S LIMITED LIFETIME WARRANTY
3
www.napoleongrills.com
PLANNING YOUR NAPOLEON MODULAR OUTDOOR ISLAND
The Napoleon Outdoor Modular Island series has been developed with versatility in mind. The cabinets can be
assembled in virtually any combination to suit your individual needs. They can be assembled against a house wall or
as a standalone island, becoming the focal point of your backyard. With multi-function and storage capabilities, your
backyard island can be transformed into an outdoor kitchen, placing the host in the center of the action when
entertaining guests.
The cabinets are designed to be easy to assemble and install for either the home owner or private contractor.
All cabinets are 35” tall by 24” deep. All cabinets are 24” wide except for the BUILT-IN grill cabinets whose width
correspond to the width of the unit it was designed for. Each cabinet has 4 leveling feet for adjustment on even
surfaces. The 2 drawer cabinets are made to fit the Napoleon BUILT-IN series of grills only, available in several different
sizes. BUILT-IN grills come in several different sizes. Refer to the installation manuals that come with the grill head for
proper installation and operating instructions.
The BUILT-IN series of grills can be ordered in your choice of propane or natural gas configuration. Natural gas
is an obvious selection for many people that already have it available in their home. All gas modifications or
installations must be done by a qualified gas installer. Knockouts are present in the side and rear panels for easy
piping and installation. For those who order a propane grill, a propane tank cabinet is available.
The cabinets can be installed against a NON-COMBUSTIBLE wall of a house, a masonry or stucco half-wall,
or freestanding in an island configuration. An optional 4” spacer panel must be purchased and installed when placing
an island against a wall to allow clearance for the grill lid to open. The spacer also provides closure for the cabinet to
prevent debris or rodents from entering behind the cabinets. A powdercoated, 2” wide end panel can be purchased to
cover the knockouts and mounting holes in the outside panels in a run of cabinets, giving a more finished look.
When utilizing 45
o
and 90
o
transitions in your design, modules on either side of the transition need to be chosen
carefully. If doors or drawers are used on either side of the transition, they will interfere with each other when opened.
If a drawer module is placed next to a grill, the control panel on the grill will prevent the top drawer from opening. The
same applies to the paper towel/garbage module. Door modules can be used with 45
o
transitions, but the control
panel will prevent the door from fully opening and may damage the door. The best module for this application is the 2
drawer module (false drawer at the top).
Optional built-in sideburner kits are available through your Napoleon Gas Grill dealer. These sideburner kits are
an excellent complement to the BUILT-IN series of grills. We recommend that the sideburner kit be installed over top of
the IM-2DC cabinet. It has the false drawer front at the top of the cabinet which allows clearance for the sideburner
valve and hose routing. The IM-2DC cabinet also provides the necessary clearance for those who would like to install a
sink in their outdoor kitchen.
Countertops must be ordered and supplied locally by the homeowner. The countertop material must be
NON-COMBUSTIBLE if a grill is to be installed into it. They can be ordered in advance by drawing out the
floorplan of how the cabinets will be situated and adding up the width measurements, allowing 1-2 inches of countertop
overhang. Most countertop manufacturers are willing to come and take measurements after assembly of the cabinets
is complete to ensure a perfect fit. For best results the countertop thickness should be between 1/2 to 1 1/2” thick.
The built-in grillhead comes with stainless steel brackets and hardware that allow the unit to rest on the countertop
above the corresponding island cabinet for that unit. Granite or Corian are excellent choices of countertop materials.
Decorative countertops made of ceramic tile set on top of cement tiling board can be made to match your surrounding
backyard furniture colors.
4
www.napoleongrills.com
TOOLS REQUIRED
Check for missing or damaged parts before you begin and consult your local retailer if neccessary.
3/8
3/8 WRENCH
OR NUTDRIVER
ADJUSTABLE
WRENCH
PHILIPS
SCREWDRIVER
HAMMER
GAS AND ELECTRICAL PIPING
The piping up to the gas grill is the responsibility of the installer and piping should be located as shown in the
built-in instructions. Do not use hose to connect the unit. It must be connected with either rigid pipe, copper tube or an
approved flexible metal connector. The installation must comply with CAN B149.1 Natural Gas and Propane installation
code in Canada, or to the National Fuel Gas code, ANSI Z223.1 in the United States. The minimum recommended
piping size is NPS 1/2" for rigid pipe, and 1/2" OD for copper tubing (based on a 20 ft run). Longer runs may require
larger sizes to conform with CAN B149.1. Propane Gas Installation Code in
Canada or to the National Fuel Gas Code, ANSI Z223.1 in the United States.
Look to the manual that came with the gas grill for further
instructions.
To ease installation and piping, removable knockouts
have been provided in the side panels and in the center of each
backpanel. The knockouts in the side panels should be removed
before the cabinets are bolted in a row. Only remove the
knockouts that are required for the piping of any gas, plumbing or
electrical lines.
KNOCKOUTS
5
www.napoleongrills.com
CONDITIONS ET LIMITATIONS
NAPOLÉON garantit votre nouveau gril à gaz contre tous défauts concernant les matériaux et le
procédé de fabrication tels qu’énumérés ci-après tant et aussi longtemps que vous êtes propriétaire du
gril. Cette garantie couvre: le panneau en acier inoxydable, avant de tiroir en acier inoxydable. Sous
réserve des conditions suivantes. Pendant les dix premières années, NAPOLÉON remplacera
gratuitement les pièces de rechange selon son choix. De la onzième année à vie, NAPOLÉON fournira
les pièces de rechange à 50% du prix de détail courant.
Les composantes tels que mise à niveau du pied, tige-pivot, es tuyaux et les raccords, les fixations et
les accessoires sont couverts et NAPOLÉON fournira les pièces gratuitement durant la première année
de la garantie limitée.
NAPOLÉON n’assumera aucun frais de transport, de main-d’oeuvre ou taxes d’exportation.
« NAPOLÉON garantit ses produits contre les défauts de fabrication à l’acheteur d’origine seulement, à condition que l’achat ait été fait par l’entremise d’un
détaillant autorisé NAPOLÉON et sous réserve des conditions et limitations suivantes. »
Cette garantie du fabricant n’est pas transférable et ne peut être prolongée ou étendue par aucun de nos représentants quelle qu’en soit la raison.
Le gril à gaz doit être installé par un installateur ou entrepreneur qualifié. L’installation doit être faite conformément aux instructions d’installation incluses
avec le produit et à tous les codes d’incendie et de construction locaux et nationaux.
Cette garantie limitée ne couvre pas les dommages causés par un mauvais usage, un manque d’entretien, des feux de graisse, un environnement
inadéquat, un accident, des altérations, des abus ou de la négligence, et l’installation de pièces d’autres fabricants annulera cette garantie.
Cette garantie limitée ne couvre pas non plus les égratignures, les bossellements, les surfaces peintes, la corrosion ou la décoloration causés par la
chaleur ou les produits d’entretien chimiques et abrasifs, ni l’écaillage des pièces en porcelaine émaillée ni les composants utilisés dans l’installation du gril à
gaz.
Dans le cas d’une détérioration des composants causant un mauvais fonctionnement de l’appareil pendant la période couverte par la garantie, les pièces
de rechange seront fournies par Napoléon.
Au cours de la première année seulement, cette garantie s’étend à la réparation ou au remplacement des pièces garanties dont les matériaux ou la
fabrication sont défectueux sous condition que le produit ait été utilisé conformément aux instructions de fonctionnement et dans des conditions normales.
Après la première année, concernant cette Garantie à Limitée du Président, NAPOLÉON peut, à sa discrétion, se libérer entièrement de toutes obligations
concernant cette garantie en remboursant à l’acheteur d’origine le prix de gros de toute pièce garantie qui est défectueuse.
NAPOLÉON ne sera pas responsable de l’installation, de la main-d’oeuvre ou autres coûts ou dépenses relatives à la réinstallation d’une
pièce garantie, et de telles dépenses ne sont pas couvertes par cette garantie.
Nonobstant toutes les dispositions contenues dans cette Garantie à Limitée du Président, la responsabilité de NAPOLÉON sous cette garantie est définie
comme ci-dessus et elle ne s’appliquera à aucun dommage accidentel, consécutif ou indirect.
Cette garantie définit les obligations et responsabilités de NAPOLÉON concernant le gril à gaz NAPOLÉON; toutes autres garanties exprimées ou
implicites concernant ce produit, ses composants ou accessoires sont exclues.
NAPOLÉON n’endosse ni n’autorise aucun tiers à assumer en son nom toute autre responsabilité concernant la vente de ce produit. NAPOLÉON ne sera
pas responsable d’une surchauffe, de l’extinction du brûleur causée par des conditions environnementales telles que des vents forts ou une ventilation
inadéquate.
Tous dommages causés au gril par les intempéries, la grêle, un usage abusif ou l’utilisation de produits chimiques ou de produits d’entretien nuisibles ne
seront pas la responsabilité de NAPOLÉON.
La facture ou sa copie sera requise ainsi que le numéro de série et de modèle du gril lors d’une réclamation auprès de NAPOLÉON.
NAPOLÉON se réserve le droit de demander à son représentant d’inspecter tous produits ou pièces avant d’honorer toute réclamation.
NAPOLÉON n’assumera aucuns frais de transport, de main-d’oeuvre ou taxes d’exportation.
Les grils à gaz NAPOLÉON sont fabriqués conformément aux normes strictes du
Certificat d’assurance de qualité mondialement reconnues ISO 9001-2008.
Les produits NAPOLÉON sont conçus avec des composantes et des matériaux de qualité supérieure,
assemblés par des artisans qualifiés qui sont fiers de leur travail.
GARANTIE À VIE LIMITÉE DU PRÉSIDENT
6
www.napoleongrills.com
PLANIFICATION DE VOTRE ÎLOT MODULAIRE EXTÉRIEUR NAPOLÉON
La polyvalence est à la base de la conception de la série des Îlots modulaires extérieurs Napoléon. Pour
convenir à vos besoins, la configuration des cabinets est presque illimitée. Les îlots peuvent être installés contre un
mur de la maison ou comme îlot isolé, créant ainsi l’élément central de votre cour arrière. Grâce à ses fonctions
multiples et à sa capacité de rangement, votre îlot peut être transformé en une cuisine extérieure. Ainsi, l’hôte évolue
au cœur de l’action lorsqu’il reçoit ses invités.
Les cabinets sont conçus pour être facilement assemblés et installés par le propriétaire ou un entrepreneur. Tous
les cabinets mesurent 35” de haut par 24” de profond. Tous les cabinets mesurent 24” de large sauf les cabinets pour
grils ENCASTRÉS dont la largeur correspond à celle de l’appareil pour lequel il est conçu. Chaque cabinet est muni de
quatre pattes de nivellement pour un ajustement facile sur les surfaces inégales. Les cabinets à deux tiroirs sont
conçus pour les grils ENCASTRÉS Napoléon seulement et sont offerts en plusieurs grandeurs. Les grils ENCASTRÉS
sont de grandeurs différentes. Consultez le manuel d’instructions de votre gril pour obtenir les instructions d’installation
et de fonctionnement appropriées.
Les grils encastrés de la série BUILT-IN sont disponibles en tant que modèle fonctionnant au propane ou au gaz
naturel. Le gaz naturel est le choix évident pour plusieurs des personnes qui l’utilisent déjà dans leur maison. Toutes
les modifications ou installations relatives au gaz doivent être faites par un installateur de gaz qualifié. Les panneaux
latéraux et arrière possèdent des plaques poinçonnées pour faciliter l’installation et le passage de la tuyauterie. Ceux
qui opteront pour un gril au propane pourront aussi se procurer un cabinet pour y insérer le réservoir.
Les cabinets peuvent être installés contre un mur INCOMBUSTIBLE de la maison, un demi-mur en maçonnerie
ou enduit de stuc, ou encore en tant qu’îlot isolé. Lorsque vous placez un îlot contre un mur, un espace doit être
ménagé pour permettre de lever le couvercle du gril. Pour ce faire, vous devez acheter et installer un espaceur mural
optionnel de 4 po. L’espaceur sert aussi à fermer l’espace entre le cabinet et le mur pour éviter que des débris ou des
rongeurs y pénètrent. Pour une finition plus élégante, des panneaux d’extrémité, finis peints à base de poudre et d’une
largeur de 2 po, peuvent être achetés pour recouvrir les ouvertures laissées par les plaques poinçonnées et les trous de
montage situés dans les panneaux extérieurs des cabinets d’extrémité.
Lorsque vous utilisez des pièces de transition de 45° et 90°, les modules de chaque côté des pièces de transition
doivent être choisis soigneusement. Si des modules avec des portes ou des tiroirs sont utilisés de chaque côté d’une
pièce de transition, ils se nuiront l’un l’autre lors de l’ouverture. Si un module avec tiroir est placé à côté d’un gril, le
panneau de commande du gril empêchera l’ouverture du tiroir supérieur. La même chose s’applique pour le module avec
le tiroir à déchets/porte essuie-tout. Les modules avec portes peuvent être installés à côté des pièces de transition de
45°, cependant, le panneau de commande du gril empêchera la porte de s’ouvrir complètement et risque d’endommager
la porte. Le module idéal pour cette application est le module à deux tiroirs (faux tiroir dans le haut).
Des ensembles de brûleur latéral optionnels sont disponibles auprès de votre détaillant de gril à gaz Napoléon.
Ces ensembles de brûleur latéral complètent à merveille les grils encastrés de la série BUILT-IN. Nous recommandons
d’installer l’ensemble de brûleur latéral sur le dessus d’un cabinet IM-2DC. Le devant à faux tiroir dans le haut de ce
cabinet fournit l’espace nécessaire pour le passage de la soupape et du boyau du brûleur. Le cabinet IM-2DC procure
aussi l’espace requis pour ceux qui aimeraient installer un évier dans leur cuisine extérieure.
Les comptoirs doivent être commandés et fournis par le propriétaire. Si le gril est incorporé dans le comptoir, ce
dernier doit être de nature INCOMBUSTIBLE. Les comptoirs peuvent être commandés à l’avance. Il suffit de faire un
croquis de l’emplacement des cabinets et de calculer les dimensions du comptoir, en y ajoutant un surplomb de 1 à 2
pouces. La plupart des fabricants de comptoirs acceptent de venir prendre les mesures une fois l’assemblage des
cabinets complété afin d’assurer un ajustement parfait. Pour de meilleurs résultats, l’épaisseur du comptoir devrait être
de ½ à 1 ½ pouce. Le gril encastré est muni de supports en acier inoxydable et de ferrures qui permettent à l’appareil
d’être placé sur le comptoir, au-dessus du cabinet approprié. Le granite, le MeganiteMD ou le Corian® représentent
d’excellents choix de matériaux pour le comptoir. Afin de les agencer aux couleurs de vos meubles extérieurs, vous
pouvez opter pour des comptoirs décoratifs faits de carreaux de céramique reposant sur un panneau de béton.
7
www.napoleongrills.com
OUTILS NÉCESSAIRES
Avant de commencer, assurez-vous que les pièces ne sont pas endommagées et qu’il n’en manque aucune.
Au besoin, consultez votre détaillant local.
3/8
CLÉ 3/8 ou
TOURNEVIS À
DOUILLE
CLÉ À MOLETTE TOURNEVIS
PHILLIPS
MARTEAU
INSTALLATION DE L’ALIMENTATION ÉLECTRIQUE ET DE LA TUYAUTERIE
POUR LE GAZ
L’installateur est responsable d’acheminer la tuyauterie au gril à gaz. La tuyauterie devrait être installée comme
montré dans le manuel du gril encastré. Ne pas utiliser de boyau pour brancher l’appareil. Le branchement doit être fait
avec du tuyau rigide, du tuyau de cuivre ou un raccord métallique flexible approuvé. L’installation doit être conforme à la
norme CAN B149.1 du Code d’installation du gaz naturel et du propane au Canada, ou à la norme ANSI Z223.1 du
National Fuel Gas Code aux États-Unis. Le diamètre minimal recommandé pour le tuyau rigide est de ½ po NPS et
celui du tuyau de cuivre de ½ po (selon une longueur de 20 pi.) Si la
longueur est plus grande, un diamètre supérieur peut être nécessaire pour
être conforme à la norme CAN B149.1 du Code d’installation du
gaz naturel et du propane au Canada, ou à la norme ANSI Z223.1
du National Fuel Gas Code aux États-Unis. Consultez le manuel
fourni avec le gril à gaz pour obtenir d’autres directives.
Pour faciliter l’installation et le passage de la tuyauterie,
des plaques poinçonnées se trouvent dans les panneaux latéraux
et au centre de chacun des panneaux arrière. Les plaques
poinçonnées situées sur les panneaux latéraux doivent être
enlevées avant d’assembler les rangées de cabinets. N’enlevez
que les plaques poinçonnées nécessaires pour passer la
tuyauterie pour le gaz, la plomberie et les fils électriques.
PLAQUES
POINÇONNÉES
8
www.napoleongrills.com
4 x
N570-0086 (#14 x 1/2")
6 x
N570-0086 (#14 x 1/2")
ALIGN REAR
EDGES
ALIGNEZ LES
BORDS ARRIÈRE
IM-UDC
SIDE PANEL ASSEMBLY
ASSEMBLAGE DES PANNEAUX LATÉRAUX
IM-UDC
REAR PANEL ASSEMBLY
ASSEMBLAGE DU PANNEAU ARRIÈRE
9
www.napoleongrills.com
4 x
N570-0086 (#14 x 1/2")
2 x
N105-0011
4 x
N570-0013 (#8 x 1/2")
#1
#2
DOOR CAN BE MOUNTED AS
LEFT OR RIGHT OPENING
LA PORTE PEUT ÊTRE
INSTALLÉE POUR S’OUVRIR
À GAUCHE OU À DROITE
IM-UDC
TOP / BOTTOM RAIL ASSEMBLY
ASSEMBLAGE DES RAILS SUPÉRIEUR ET INFÉRIEUR
IM-UDC
CABINET DOOR ASSEMBLY
ASSEMBLAGE DE LA PORTE DU CABINET
10
www.napoleongrills.com
4 x
N570-0086 (#14 x 1/2")
6 x
N570-0086 (#14 x 1/2")
IM-UTC
SIDE PANEL ASSEMBLY
ASSEMBLAGE DES PANNEAUX LATÉRAUX
IM-UTC
REAR PANEL ASSEMBLY
ASSEMBLAGE DU PANNEAU ARRIÈRE
11
www.napoleongrills.com
4 x
N570-0086 (#14 x 1/2")
4 x
N570-0086 (#14 x 1/2")
4 x
N570-0013 (#8 x 1/2")
IM-UTC
PROPANE TANK SLIDER ASSEMBLY
ASSEMBLAGE DE LA GLISSIÈRE POUR RÉSERVOIR DE PROPANE
IM-UTC
TOP / BOTTOM RAIL ASSEMBLY
ASSEMBLAGE DES RAILS SUPÉRIEUR ET INFÉRIEUR
12
www.napoleongrills.com
2 x
N105-0011
IM-UTC
PROPANE TANK DRAWER INSTALLATION
INSTALLATION DE LA TABLETTE POUR RÉSERVOIR DE PROPANE
IM-UTC
CABINET DOOR ASSEMBLY
ASSEMBLAGE DE LA PORTE DU CABINET
#1
#2
13
www.napoleongrills.com
The gas connection of the Mirage series grills is at the left of the control panel. Placing the tank enclosure
cabinet to the left of the unit cabinet will make for easier gas piping. Knockouts have been punched in the sides and
back panels to provide easy routing of gas or electrical piping. Once the knockout has been removed a bushing must
be installed to prevent the gas or electrical line being cut on the edge of the hole. Gas piping and installation must be
done by a qualified gas installer.
Le branchement du gaz des grils Napoléon se trouve à la gauche du panneau de contrôle. Placer le cabinet
pour réservoir de propane à gauche du cabinet pour gril simplifiera l’installation de la tuyauterie pour le gaz. Des
plaques ont été poinçonnées dans les panneaux latéraux et arrière pour faciliter l’installation de l’alimentation électrique
et de la tuyauterie pour le gaz. Une fois les plaques poinçonnées enlevées, une bague doit y être insérée pour éviter
que les conduites de gaz ou les fils électriques ne s’endommagent sur les bords de l’ouverture. L’installation de la
tuyauterie pour le gaz doit être faite par un installateur de gaz qualifié.
IM-UTC
PROPANE SUPPLY HOSE ROUTING
ACHEMINEMENT DU BOYAU D’ALIMENTATION EN PROPANE
14
www.napoleongrills.com
4 x
N570-0086 (#14 x 1/2")
4 x
N570-0086 (#14 x 1/2")
CABINET TO CABINET ASSEMBLY
INSTALLATION DE CABINETS CÔTE À CÔTE
IM-45T
CABINET 45 DEGREE CONNECTION
RACCORDEMENT DE CABINETS À 45 DEGRÉS
15
www.napoleongrills.com
12 x
N570-0086 (#14 x 1/2")
4 x
N570-0086 (#14 x 1/2")
IM-CEP
CABINET END PANEL KIT
ENSEMBLE DE PANNEAU D’EXTRÉMITÉ
IM-45T x 2
CABINET 90 DEGREE CONNECTION
RACCORDEMENT DE CABINETS À 90 DEGRÉS
16
www.napoleongrills.com
6 x
N570-0086 (#14 x 1/2")
COUNTERTOP TO BE FASTENED AS PER MANUFACTURER’S INSTRUCTIONS. HOLES HAVE BEEN PLACED ON
THE TOP FLANGE OF THE SIDE PANELS TO ALLOW FOR FASTENERS.
FIXEZ LE COMPTOIR EN RESPECTANT LES DIRECTIVES DU FABRICANT. DES TROUS ONT ÉTÉ MÉNAGÉS
DANS LE REBORD SUPÉRIEUR DES PANNEAUX LATÉRAUX POUR Y INSÉRER LES PIÈCES DE FIXATION.
IM-CEP
CABINET END PANEL KIT
ENSEMBLE DE PANNEAU D’EXTRÉMITÉ
SHOWN WITH REAR
PANEL REMOVED
ILLUSTRÉ SANS LE
PANNEAU ARRIÈRE
17
www.napoleongrills.com
REFER TO BUILT-IN MANUAL THAT ACCOMPANIES THE GRILL FOR COMPLETE INSTRUCTIONS.
GAS PIPING MUST BE DONE BY A LICENSED GAS INSTALLER.
CABINET LEVELING PROCEDURE
MISE DE NIVEAU DU CABINET
POUR DES DIRECTIVES COMPLÈTES, CONSULTEZ LE MANUEL QUI ACCOMPAGNE LE GRIL ENCASTRÉ.
LA TUYAUTERIE POUR LE GAZ DOIT ÊTRE INSTALLÉE PAR UN INSTALLATEUR POUR LE GAZ AUTORISÉ.
18
www.napoleongrills.com
IM-UDC
IM-UTC
IM-FDC/IM-FHL/IM-FHR
# Part # Description
1 n475-0223p side panel / panneau avant
2 n475-0224p back panel / panneau arrière
3 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
4 n010-0575p assembly, bottom shelf / ensemble de tablette inférieu
r
5 n570-0031 leveling foot / mise à niveau du pied
6 n525-0018p rail, top/bottom / support superior/inférieur
7 n105-0011 bushing, door / bagues de porte
8 n555-0023 door pivot rod / tige-pivot de porte
9 n010-0590 door assembly / ensemble de porte
10 n430-0002 magnetic catch / loquet magnétique
11 n080-0232p door magnet bracket / support de magnétique
12 n570-0008 screw , #8 x 1/2" / vis #8 x 1/2"
# Part # Description
1 n475-0223p side panel / panneau avant
2 n475-0237p back panel / panneau arrière
3 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
4 n010-0575p assembly, bottom shelf / ensemble de tablette inférieu
r
5 n570-0031 leveling foot / mise à niveau du pied
6 n525-0018p rail, top/bottom / support superior/inférieur
7 n105-0011 bushing, door / bagues de porte
n105-0002 bushing, 1.5" / bagues de porte 1.5"
8 n555-0023 door pivot rod / tige-pivot de porte
9 n010-0590 door assembly / ensemble de porte
n325-0016 door handle / poignée de porte
10 n430-0002 magnetic catch / loquet magnétique
11 n080-0232p door magnet bracket / support de magnétique
12 n570-0008 screw , #8 x 1/2" / vis #8 x 1/2"
13 n710-0061p tank draw er
14 n010-0360p tank support ring
15 n080-0225p tank draw er support bracket
22
14
17 21 5 3 9
13
23
12
11
19
207 18
1 16 2 14
5 6
8
8 9
10
17
13 14
15
19
20
24
# Part # Description
1 n475-0223p side panel / panneau avant
2 n475-0281p back panel / panneau arrière
3 n200-0094p cover plate / la plaque de couverture
4 n570-0013 screw , #8 x 5/8" / vis #8 x 5/8"
5 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
6 n010-0575p assembly, bottom shelf / ensemble de tablette inférieu
r
7 n570-0031 leveling foot / mise à niveau de pied
8 n525-0018p rail, top/bottom / support superior/inférieur
9 n105-0011 bushing, door / bagues de porte
10 n105-0012 bushing, 1 1/2" / bagues de porte 1 1/2"
11 n555-0023 door pivot rod / tige-pivot de porte
12 n225-0039 door / porte
13 n080-0227p
fridge door mounting bracket / support de fixation de la
porte du réfrigérateur
14 n570-0032 screw , #8 x 3/8" / vis #8 x 3/8"
15 n715-0089p
fridge enclosure trim narrow / moulure de cabinet pour
réfrigérateur - étroite
16 n715-0088p
fridge enclosure trim w ide / moulure de cabinet pour
réfrigérateur - large
17 n080-0226p
fridge mounting bracket / support de fixation du
réfrigérateur
18 n035-0098p fridge platform / plateforme pour le réfrigérateur
19 n485-0005 pin / écrou
20 n570-0034 screw , 10-32 x 1/4" / vis 10-32 x 1/4"
21 n080-0293
fridge mounting bracket / support de fixation du
réfrigérateur
22 n570-0008 screw , #8 x 1/2" / écrou #8 x 1/2"
23 n120-0010 screw cap / bouchon à vis
24 n735-0001 w asher / rondelle
19
www.napoleongrills.com
IM-3DC
IM-2DC
IM-WDC
# Part # Description
1 n010-0678 side panel left / panneau avant gauche
2 n010-0678 side panel right / panneau avant droite
3 n475-0224p back panel / panneau arrière
4 n525-0018p rail, top/bottom / support superior/inférieur
5 n570-0031 leveling foot / mise à niveau du pied
6 n010-0575p assembly, bottom shelf / ensemble de tablette inférieu
r
7 n010-0677 draw er assembly / assemblage du tiroir
8 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
# Part # Description
1 n010-0678 side panel left / panneau avant gauche
2 n010-0678 side panel right / panneau avant droite
3 n475-0224p back panel / panneau arrière
4 n525-0018p rail, top/bottom / support superior/inférieur
5 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
6 n010-0574 false draw er front / avant faux de tiroir
7 n570-0013 screw , #8 x 1/2" / vis #8 x 1/2"
8 n010-0677 draw er assembly / assemblage du tiroir
9 n010-0575p assembly, bottom shelf / ensemble de tablette inférieu
r
10 n570-0031 leveling foot / mise à niveau du pied
# Part # Description
1 n010-0678 side panel left / panneau avant gauche
2 n010-0678 side panel right / panneau avant droite
3 n475-0224p back panel / panneau arrière
4 n525-0018p rail, top/bottom / support superior/inférieur
5 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
6 n555-0032 paper tow el rod / tige pour essuie-tout
7 n485-0012 cotter pin / vis
8 n010-0576p
paper tow el housing assembly / assemblage de la
porte du compartiment à essuie-tout
9 n570-0008 screw , #8 x 1/2" / vis #8 x 1/2"
10 n010-0578
paper tow el door assembly / assemblage de
compartiment pour essuie-tout
11 n555-0031 pivot rod / tige-pivot
12 n010-0679
draw er assembly, trash can / assemblage du tiroir,
panier à déchets
13 n570-0031 leveling foot / mise à niveau du pied
14 n010-0575p assembly, bottom shelf / ensemble de tablette inférieu
r
20
www.napoleongrills.com
IM-UGC600 / IM-UGC605 / IM-UGC730
IM-UGC750
# 750 Description
1 n010-0678 side panel left / panneau avant gauche
2 n010-0678 side panel right / panneau avant droite
3 n475-0258p back panel / panneau arrière
4 n525-0029p top rail / support superior
5 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
6 n010-0677 draw er assembly / assemblage du tiroir
7 n525-0028p bottom rail / support inférieur
8 n570-0031 leveling foot / mise à niveau du pied
9 n010-0624p bottom shelf / tablette inférieur
10 n585-0060p draw er dripshield / écran anti-égouttement pour tiroir
11 n570-0013 screw , #8 x 1/2" / vis #8 x 1/2"
12 n475-0260p
draw er slider mounting panel / panneau d'assemblage
pour glissière de tiroir
13 n475-0259 cabinet fascia panel / panneau de finition pour cabinet
n710-0064
drippan, replaces pan included with BIPT750 / tiroir
d'égouttement, remplace le tiroir inclus avec le BIPT750
# 245/300 450 485-1 500 Description
1 n010-0678 n010-0678 n010-0678 n010-0678 side panel left / panneau avant gauche
2 n010-0678 n010-0678 n010-0678 n010-0678 side panel right / panneau avant droite
3 n475-0224p n475-0229p n475-0302-sv1sg n475-0302-sv1sg back panel / panneau arrière
4 n525-0031p n525-0025p n525-0042-sv1sg n525-0041-sv1sg top rail / support superior
5 n570-0086 n570-0086 n570-0086 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
6 n010-0677 n010-0680 n010-0745 n010-0745 draw er assembly / assemblage du tiroir
7 n525-0018p n525-0022p n525-0040-sv1sg n525-0040-sv1sg bottom rail / support inférieur
8 n570-0031 n570-0031 n570-0031 n570-0031 leveling foot / mise à niveau du pied
9 n010-0575p n010-0579p n010-0744-sv1sg n010-0744-sv1sg bottom shelf / tablette inférieur
10 n585-0062p n585-0053p n585-0085-sv1sg n585-0084-sv1sg drawer dripshield / écran anti-égouttement pour tiroir
11 n570-0013 n570-0013 n570-0013 n570-0013 screw , #8 x 1/2" / vis #8 x 1/2"
n710-0066 drippan, replaces pan included w ith BI300 / tiroir
d'égouttement, remplace le tiroir inclus avec le BI300
#
600 605 730 Description
1 n010-0678 n010-0678 n010-0678 side panel left / panneau avant gauche
2 n010-0678 n010-0678 n010-0678 side panel right / panneau avant droite
3 n475-0256p n475-0231p n475-0233p back panel / panneau arrre
4 n525-0027p n525-0020p n525-0021p top rail / support superior
5 n570-0086 n570-0086 n570-0086 screw , #14 x 1/2" / vis #14 x 1/2"
6 n010-0681 n010-0682 n010-0683 draw er assembly / assemblage du tiroir
7 n525-0026p n525-0023p n525-0024p bottom rail / support inférieur
8 n570-0031 n570-0031 n570-0031 leveling foot / mise à niveau du pied
9 n010-0628p n010-0581p n010-0583p bottom shelf / tablette inférieur
10 n585-0059p n585-0051p n585-0052p draw er dripshield / écran anti-égouttement pour tiro
ir
11 n570-0013 n570-0013 n570-0013 screw , #8 x 1/2" / vis #8 x 1/2"
IM-UGC245/300 / IM-UGC450 / IM-UGC485-1 / IM-UGC500
21
www.napoleongrills.com
ORDERING REPLACEMENT PARTS
Before contacting the customer care department, check the NAC web site for more extensive cleaning, mainte-
nance, troubleshooting and part replacement instructions at www.napoleongrills.com. Contact the factory directly for
replacement parts and warranty claims. The customer care department is available between 9 AM and 5 PM (Eastern
standard time) at 1-866-820-8686 or fax at 1-705-727-4282. In order to process a claim, we must be provided with the
following information:
1. Model and serial number of the unit.
2. Part number and description.
3. A concise description of the problem ('broken' is not sufficient).
4. Proof of purchase (photocopy of the invoice).
In some cases the customer care representative may request to have the parts returned to the factory for
inspection, before providing replacement parts. The parts must be shipped prepaid to the attention of the customer care
department with the following information:
1. Model and serial number of the unit.
2. A concise description of the problem ('broken' is not sufficient).
3. Proof of purchase (photocopy of the invoice).
4. Return Authorization number - provided by the customer service representative.
Before contacting customer care, please note that the following items are not covered by the warranty:
-costs for transportation, brokerage or export duties
-labor costs for removal and re-installation
-costs for service calls to diagnose problems
-discoloration of stainless steel parts
-part failure due to lack of cleaning and maintenance, or use of improper cleaners (ovencleaner).
COMMANDE DES PIÈCES DE RECHANGE
Avant de contacter le bureau de service du clientele, veuillez prendre note, que notre guide de dépanage est
maintenent dispoible sur le net a www.napoleongrills.com. Ici, vous trouver beaucoup d'information comme les
instructions de d'opération et de nettoyage et comment remplacer les pièces. Contactez le manufacturier directement
pour obtenir des pièces de rechanges et faire des réclamations sur garantie. Le département de service est à votre
disposition entre 9 AM et 5 PM (heure normale de l’est) au 1-866-820-8686 ou fax au 1-705-727-4282. Pour qu’une
réclamation soit traitée, l’information suivante est nécessaire :
1. Modèle et numéro de série de l’appareil.
2. Numéro de la pièce et description.
3. Une description concise du problème («cassé» n’est pas suffisant).
4. Preuve d’achat (copie de la facture).
5. Avoir en main votre Visa ou Mastercard pour payer les frais d'expedition.
Dans quelques cas, le département du service peut demander de leur retourner la pièce pour des fins d’inspection
avant de fournir une pièce de rechange. Les pièces doivent être expédiées port payé à l’attention du département de
service avec l’information suivante :
1. Modèle et numéro de série de l’appareil.
2. Une description concise du problème («cassé» n’est pas suffisant.
3. Preuve d’achat (copie de la facture).
4. Un numéro l'autorisation de retour - fourni par le représentant du département de service.
Avant de contacter le département de service, veuillez prendre note que les items suivants ne sont par couverts par
la garantie :
-coûts de transport, bris et frais d’exportation
-main-d’oeuvre pour l’enlèvement et l’installation de la pièce
-coûts des appels de service pour diagnostiquer le problème
-décoloration des pièces en acier inoxydable
-bris des pièces suite à un manque d’entretien ou de maintenance, ou utilisation de nettoyeurs non appropriés
(nettoyeur à fourneau)
22
www.napoleongrills.com
FAX TO: 705 727 4282
CONTACT NAME:______________________________________________________________________
SHIP TO :_____________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
TEL :_________________________________ FAX :______________________________
EMAIL: __________________________________________________________________
VISA OR MASTERCARD # :_______________________________________ EXPIRY DATE: _____________
SIGNATURE:____________________________________________________________________________
_
QUANTITY
TAXES MAY APPLY
SHIPPING EXTRA
IF CONFIRMATION IS REQUIRED PLEASE INCLUDE A FAX NUMBER OR EMAIL ADDRESS
ACCESSORIES & PARTS ORDER FORM
PART NUMBER DESCRIPTION
PLEASE PRINT CLEARLY
23
www.napoleongrills.com
TÉLÉCOPIEZ AU: 705 727 4282
NOM DU CLIENT______________________________________________________________________
ADRESSE:_____________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
TÉLÉPHONE :_________________________________ FAX :______________________________
EMAIL: __________________________________________________________________
# VISA OU MASTERCARD :_______________________________________ DATE D’EXPIRATION : _______
_
SIGNATURE:____________________________________________________________________________
_
QUANTITÉ
LES TAXES PEUVENT S'APPLIQUER
LES FRAIS D'EXPEDITION SUPPLÉMENTAIRE
SI VOUS DÉSIREZ RECEVOIR UNE CONFIRMATION, VEUILLEZ INCLURE UN NUMÉRO DE
T
É
L
É
COPIEUR OU UNE ADRESSE COURRIEL
BON DE COMMANDE POUR PIÈCES/ACCESSOIRES
NUMÉRO DE PRODUIT DESCRIPTION
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Napoleon OASIS 100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Napoleon OASIS 100 in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 1,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info