28
SPLIT TIME MEASUREMENT
Example of using split time measurement for two runners. Two runners can be
timed simultaneously; the first runner’s time can be recorded while the second
runner’s time will continue to be accumulated until he finishes.
1. Press pusher “A” to start the timing of the first and second runner
2. Press pusher “B” to stop and record the timing of the first runner.
( Once pusher “B” is activated, even though the chrono minute hand and the
big stopwatch sec. hand stop on the dial, the stopwatch still continues to
internally.)
3. Press pusher “B” to catch up the timing of the second runner. The stopwatch
sec. hand will jump to show internal accumulated time and to carry on timing
of the second runner.
4. Press pusher “A” to stop the timing of the second runner and record the time.
5. Press pusher “B” for third time to reset, all stopwatch chrono hands will return
to “12” and “0” position.
CORRECTIVE MODE FOR STOPWATCH CHRONO HANDS
1. Pull crown to position “C”
2. Press pushers “A” and “B” simultaneously for at least 2 seconds.
3. The big stopwatch sec hand rotates by 360 degree to activate corrective
mode
TO ADJUST THE BIG SEC. STOPWATCH HAND
If it is not located at “12” or “0” position, either press pusher “A” continuously or
repeatedly until the hand moves by each interval and returns to “12” and “0”
position.
