707503
17
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
E15
NAIT 5si
Automatic Input Switching only becomes operational on exit
from program mode by pressing and holding the handset
prog key.
Note: The NAIT 5si will leave program mode automatically
if no control commands are received for ve minutes.
Note: In a few cases some further equipment
conguration may be required for auto switching to
operate correctly. Please contact your retailer or local
distributor for advice.
14.2 AV Bypass
The NAIT 5si can be integrated within a multi-channel home
theatre system, driving the front left and right channel
speakers, by engaging its AV Bypass mode. AV Bypass mode
enables a home theatre processor to take over volume control
of signals connected to the NAIT 5si av input.
To select AV Bypass, rst switch the NAIT 5si into program
mode by pressing and holding the handset prog key (with
the handset in preamplier mode). The front panel av button
will illuminate if AV Bypass is selected. If it is not enabled it
can be switched on by pressing av button twice.
The NAIT 5si volume control indicator will extinguish when
AV Bypass mode is engaged and the av input is selected.
Remote handset volume control and mute function will also
be disabled.
Note: The AV Bypass feature must be used with care. It
bypasses the NAIT 5si volume control leaving any signal
connected to the av input to be passed to the speakers at
full volume.
Note: Inserting a headphone plug while AV Bypass mode
is selected temporarily returns the NAIT 5si to normal
operation. Removing the headphone plug will return the
NAIT 5si to AV Bypass mode.
Note: The mute function is disabled when AV Bypass
mode is engaged.
14.3 Handset Volume Control
The remote handset volume keys provides some alternative
control characteristics. A short press and release of a key
will adjust by a preset “nudge, while pressing and holding
the key will result in three seconds of slow adjustment
followed by continual fast adjustment.
Note: The NAIT 5si does not incorporate any facility for
channel balance adjustment.
14.4 Mute
Mute silences the outputs and can be selected or
deselected by pressing the remote handset mute key.
14.5 Display
The NAIT 5si front panel button illumination can be
switched o by pressing the remote handset (in preamplier
mode) disp function. Any subsequent handset or front panel
operation will temporarily restore the display. A second
operation of the disp function will restore the display.
14.6 Remote Control
The NARCOM 5 remote handset supplied with the
NAIT 5si duplicates all conguration and control functions.
See Section 15 for more information.
14.7 Defaults
To restore all NAIT 5si programmable settings to the factory
defaults press and hold the remote handset disp key while
the unit is in program mode. The NAIT 5si will exit from
program mode following this operation.
14.8 Fault Conditions
The NAIT 5si will indicate fault conditions by ashing front
panel button buttons. The following table lists the fault
indications.
Fault Flashing Button
Excess Temperature cd
Excess Current tuner
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Naim SUPERNAIT 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Naim SUPERNAIT 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Naim SUPERNAIT 2

Naim SUPERNAIT 2 Gebruiksaanwijzing - Nederlands - 22 pagina's

Naim SUPERNAIT 2 Gebruiksaanwijzing - Deutsch - 22 pagina's

Naim SUPERNAIT 2 Gebruiksaanwijzing - Français - 22 pagina's

Naim SUPERNAIT 2 Gebruiksaanwijzing - Italiano - 22 pagina's

Naim SUPERNAIT 2 Gebruiksaanwijzing - Espanõl - 22 pagina's

Naim SUPERNAIT 2 Gebruiksaanwijzing - Polski - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info