707490
7
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
5
Installation and Connection
2.10.3 Network Settings
The NDX/5XS is set up when originally shipped not to
require any on-site TCP/IP configuration but to connect
to a network automatically (it uses DHCP by default).
However, if your NDX/5XS has been previously used, its
network configuration may have been altered leaving
it unable to connect automatically. If this appears to be
the case ensure that DHCP is selected in the Network
Settings menu (see Section 4.5 of this manual) and re-start
NDX/5XS. If problems still persist contact your retailer,
installer or Naim Audio directly.
Note: Before reporting network connection problems carry
out a Factory Reset operation. Select Reset All Settings
from the Factory Settings setup menu. See Section 4.10.
Note: A NDX/5XS switched on without a working wired
network connection will only be able to connect to
a home network wirelessly. To use an Ethernet (wired)
connection, switch the NDX/5XS off, connect the network
and switch it on again.
Note: For internet radio to operate, the NDX/5XS requires
connection to a broadband internet service.
2.11 System Automation
NDX/5XS control can be linked using System Automation
to the control of some Naim preamplifiers, CD players and
the Naim DAC. System Automation enables for example,
preamplifier inputs to be selected via the NDX/5XS, or for
n-Stream transport functions to control a CD player. To take
advantage of System Automation, connect one of the
NDX/5XS rear panel Remote Out sockets to a preamplifier,
CD player or DAC Remote In socket. Use a cable
terminated with a 3.5mm jack plug at one end and a
3.5mm jack or phono plug as necessary at the other end.
Using both NDX/5XS Remote Out sockets, for example, one
connected to a preamplifier and one connected to a CD
player enables comprehensive system control via just one
user interface (handset or n-stream iPhone app).
Note: Stereo and mono 3.5mm jack to 3.5mm jack can
be used for System Automation. If a stereo 3.5mm jack to
phono plug cable is used, connect the left channel phono
plug.
Note: NDX/5XS System Automation is switched off by
default. A full description of its configuration and use can
be found in Section 4.9.
2.12 External Control and Update Sockets
The NDX and ND5 XS are fitted with a 3.5mm jack Remote
In socket on their rear panels. The Remote In socket
can be used for RC5 remote control via a fully wired
connection or a remote IR repeater.
The NDX and ND5 XS are also fitted with a rear panel mini-
USB socket. This socket enables firmware upgrades and
diagnostic tests to be carried out. Contact your retailer for
more information if required.
Note: The rear panel mini-USB socket is not intended for the
connection of USB storage hardware and cannot be used
for audio playback.
2.13 Signal Ground Switch
The NDX/5XS is fitted on its rear panel with a Signal Ground
switch offering two positions: Chassis and Floating. Select
the Chassis position unless NDX/5XS is connected in a hi-fi
system incorporating another earthed source component,
or mains “hum” is audible through the loudspeakers.
Contact your retailer, distributor or Naim for advice if
necessary.
Note: “Connected” in the context above means an
analogue audio signal cable that includes an earth
connection.
Note: All Naim CD players are earthed so the Signal
Ground switch should be set to floating if one is connected
in the system (unless a digital signal connection is used).
Note: The Signal Ground switch setting is not affected by
the use of an external power supply.
No damage will be done if the wrong Signal Ground
position is chosen, however the system sound quality may
be compromised.
2.13.1 General Audio Connection Notes
The NDX/5XS mains earth (ground) should always be
connected regardless of what other equipment is used.
Note: If an external power supply is used the NDX/5XS
mains earth is connected through the Burndy connection
cable to the power supply mains earth.
A mains earth grounds the chassis and the electrostatic
screen within the transformer, and is only connected to the
signal negative if the Signal Ground switch is set to Chassis.
In order to avoid hum loops, the signal negative of the
whole system should be connected to the mains earth in
one place only.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Naim ND5 XS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Naim ND5 XS in de taal/talen: Engels als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Naim ND5 XS

Naim ND5 XS Gebruiksaanwijzing - Nederlands - 23 pagina's

Naim ND5 XS Gebruiksaanwijzing - Deutsch - 23 pagina's

Naim ND5 XS Gebruiksaanwijzing - Italiano - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info